Coaxial - Lan Converter

WJ-PR201 i-PRO

Coaxial - LAN Converter

1-channel receiver side unit

• Two models (4-channel and 1-channel) are provided on the receiver side
Up to 4 network cameras can be connected and used on a single receiver side unit.(WJ-PR204)
• Power over Ethernet Plus (PoE+) ready
he coaxial - LAN converter is compliant with PoE+ standards (IEEE802.3at) and PoE+ cameras can be connected and used*1.
• Use over long distances
The coaxial - LAN converter can be used for distances of up to 300 m (984 feet) for PoE+ connections and 500 m (1,640 feet) for PoE connections, and 2.0 km (6,560 feet) for non-PoE+ connections. (When used with RG-6/U coaxial cable, and the loop resistance is below 4 Ω/100 m {328 feet} without additional joint parts.)
• High-speed transmission
The coaxial - LAN converter is capable of transmission speeds of 35 Mbps or over for TCP*2, and 45 Mbps or over for UDP connections*2.
(When used with RG-6/U coaxial cable, and for distances under 2.0 km (6,560 feet)
• No setup required
Connections can be established by simply connecting the coaxial cable to the coaxial - LAN converter.
*1 There are limitations on the combinations of the cameras to be connected, the type of power supply and transmission range to the receiver side units.
For more detail please see the operating instructions on our website.
*2 Transmission speed is the speed of transmission between the receiver side unit and the camera side unit.
Values may vary depending on the condition of the coaxial cable (for example, as the cable deteriorates over time), network conditions, etc.

COMPONENT SPECIFICATION
Operating Environment Temperature : 0 to 50 °C {+32 °F to +122 °F}
Humidity : 10 % to 90 % (without condensation)
Interfaces 10Base-T/100Base-TX x 1
BNC connector : x 1
Dimensions (W x D x H) Main Body : 105 mm x 44 mm x 98 mm {4-5/32 inches x 1-3/4 inches x 3-7/8 inches}
When a BNC connector cover is mounted : 105 mm x 44 mm x 165 mm {4-5/32 inches x 1-3/4 inches x 6-1/2 inches}
Mass (Approx.) 250g (0.55 lbs)
Power Supply Use the included AC adapter.
 INPUT : 100 - 240 V 50/60 Hz
 OUTPUT : DC 57 V / 1.14 A
Use the PoE power supply
 PoE DC 48V / Approx. 265 mA
Power Consumption Use the included AC adapter.
 DC 57 V / 700 mA / Approx. 40 W
Use the PoE power supply
 PoE DC 48 V : 265 mA / Approx. 12.95 W (Class 0 device)
Finish Main unit : PC/ABS Silver,
BNC connector cover : ABS White

Specifications

Data Sheet

Manuals

User Manual/Operating Instruction

Firmware/Software

Firmware

Release Note

Image/CAD/BIM

Image Data

CAD Data

WV-PR201 CAD Drawing DXF

WV-PR201 CAD Drawing DXF

WV-PR201 CAD Drawing DXF
WV-PR201 CAD Drawing PDF

WV-PR201 CAD Drawing PDF

WV-PR201 CAD Drawing PDF

Certification

Certificate of Compliance

Close