1. Home
  2. Surveillance
  3. Learning and Support
  4. Knowledge Base
  5. Technical Information
  6. How to adjust the shooting direction of Multi-directional+PTZ camera using WV-QSR508

How to adjust the shooting direction of Multi-directional+PTZ camera using WV-QSR508

 

 February, 2023

This article provides how to adjust the shooting direction of the following Multi-directional+PTZ cameras installed on the wall using WV-QSR508. 
Depending on the location where the camera is installed, the center of the image from a multi-directional camera may not be on the desired position. 

Applicable models:

WV-X86531-Z2 / WV-X86531-Z2-1 (4 sensors)
WV-X86530-Z2 / WV-X86530-Z2-1 (3 sensors)

Assuemd situation:

How do I adjust the shooting direction to capture the crosswalk on the center of the image?

4-sensor camera


3-sensor camera 

 

Adjustment method for both 4-sensor and 3-sensor cameras:

To set the center position as above images, adjust the direction according to the following steps.

1. Remove the camera body and attachment plate from WV-QSR508.

2. Loosen the 2 fixing screws and the nut of WV-QSR508 (Refer to WV-QSR508 Installation Guide - Step 4).

3. Set the "A" symbol on WV-QSR508 to the direction of desired center position.

4. Tighten the nut and 2 fixing screws (Refer to WV-QSR508 Installation Guide - Step 6).

5. Attach the attachment plate and the camera body to WV-QSR508.