WV-QCL100-W(QCL101-W) is used to attach indoor dome cameras or PTZ cameras to a high ceiling using a locally procured pipe. 
Basically, 2 pcs of WV-QCL100-W(QCL101-W) (one on the ceiling and the other on the camera) are needed for installation, but you can also install your camera using 1 pc of  WV-QCL100-W(QCL101-W) in combination with a locally procured bracket. Refer to the following "1. Installation example" and "2. Points to note" when installing.

1. Installation example

Sample images of camera installation to the ceiling using a pipe or bracket procured locally.

#1 Use 2 pcs of  WV-QCL100-W(QCL101-W) for installation

#2 Use 1 pc of WV-QCL100-W(WV-QCL101-W) and 1 pc of locally procured bracket for installation

2. Points to note

    Locally procured bracket

• Refer to the following fixing screw specifications for connecting to WV-QCL100-W(WV-QCL101-W).
  <WV-QCL100-W>
  40A R 1-1/2, 11crest, deep 30 or more (taper pipe thread)
  <WV-QCL101-W>
  NPT 1-1/2, 11.5crest, deep 30 or more (taper pipe thread)
• Depending on the screw thread of the pipe procured locally, the fixing position varies as the position where the screw meshes with WV-QCL100-W (QCL101-W) varies.

    Safety wire

• When using a WV-QCL100-W(WV-QCL101-W) connected to a locally procured bracket, use a safety wire to connect from WV-QCL100-W(WV-QCL101-W) to the ceiling for fall prevention.
• The illustration below is an example of making a safety wire. When making a safety wire following this illustration, prepare a safety wire fixing bracket to fix the snap hook to the ceiling.