360 derece Balıkgözü kameralar
WV-SFV481 i-PRO
360-degree Fisheye Network Camera
DISCONTINUED PRODUCT
9MP 360-degree Vandal Resistant Outdoor Dome Network Camera
Successor model : WV-X4571L
• 360° monitoring with a wide variety of transmission modes : Panorama, Double Panorama, Quad PTZ, Single PTZ, and Quad streams (H.264)
• 9 Megapixel images up to 15 fps.
• Smooth PTZ operation without mechanical action
• Built-in distortion correction function
• A fisheye lens control function realizes intelligible screen operation intuitively.
• Smartphone monitoring : Direct camera control from smartphone
• Wide dynamic range and ABS (Adaptive Black Stretch) technologies deliver wider dynamic range.
• High sensitivity with Day/Night (ICR)* function : 0.3 lx (Color), 0.04 lx (B/W) at F1.9 * ICR: IR Cut filter Removal
• Built-in ABF enables automatic focus adjustment for sharp image both in color and B/W modes, and corrects the focus shift that caused by temperature difference. You can install the camera even in the environment having drastic changes in temperature.
• Digital Noise Reduction: 3D-DNR ensures noise reduction in various conditions.
• SDXC/SDHC/SD Memory card slot for manual recording (H.264 / JPEG), alarm recording (H.264 / JPEG) and backup upon network failure (JPEG)
• Can be added new intelligent extension software (Extension software) in addition to built- in VMD (Video Motion Detection), alarm function.
• Intelligent function (Extension software) such as Intruder / Loitering / Scene change / Object / Cross line detection, People Count (Cross line), MOR(Moving Object Remover) Function, Heat map (High Traffic Zone / Long-stay Zone)
• Super Chroma Compensation function realizes a better color
• IP66 rated water and dust resistant. Compatible with IEC60529 measurement standard,Type 4X(UL50), NEMA 4X compliant.
• Dehumidification device for use in various weather conditions
• Operating temperature –40 °C to +50 °C (–40 °F to 122 °F)
• Vandal resistant mechanism for high reliability
• "Railway applications – Electronics equipment used on rolling stock" compatible with EN50155
Camera
| COMPONENT | SPECIFICATION |
|---|---|
| Image Sensor | 1/2 type MOS image sensor, Built-in primary color lter |
| Scanning Mode | Progressive |
| Scanning Area | 5.54 mm(H) × 5.54mm (V) {7/32 inches (H) × 7/32 inches (V)} |
| Minimum Illumination | Color : 0.3 lx (F1.9, Maximum shutter : Off (1/30 s), AGC : High) Color : 0.02 lx (F1.9, Maximum shutter : max. 16/30 s, AGC : High) BW : 0.04 lx (F1.9, Maximum shutter : Off (1/30 s), AGC : High) BW : 0.003 lx(F1.9, Maximum shutter : max. 16/30 s, AGC : High) |
| White Balance | AWC (2,000 ~ 10,000 K), ATW1 (2,700 ~ 6,000 K), ATW2 (2,000 ~ 6,000 K) |
| Light Control Mode | Indoor scene (50 Hz / 60 Hz) / ELC |
| Maximum shutter | max. 1/10000 s, max. 1/4000 s, max. 1/2000 s, max. 1/1000 s, max. 1/500 s, max. 1/250 s, max. 1/120 s, max. 1/100 s, max. 2/120 s, max. 2/100 s, max. 3/120 s, max. 3/100 s, max. 1/30 s, max. 2/30 s, max. 4/30 s, max. 6/30 s, max. 10/30 s, max. 16/30 s |
| Wide dynamic range | ON / OFF |
| Adaptive Black Stretch | On / Off (only when Wide Dynamic range : Off) |
| AGC | On(High) / On(Mid) / On(Low) / Off |
| Day/Night (ICR) | Off / On / Auto1(Normal) / Auto2(IR Light) / Auto3(SCC) |
| Digital Noise Reduction | High / Low |
| Video Motion Detection | On / Off, 4 areas available |
| Number of the preset positions | 16 Preset can only be used when the image type is Quad PTZ or Single PTZ. |
| Auto mode | Auto pan/ Preset sequence Auto mode can only be used when the image type is Quad PTZ or Single PTZ. |
| Self return | 10 s / 20 s / 30 s / 1 min / 2 min / 3 min / 5 min / 10 min / 20 min / 30 min / 60 min Self return can only be used when the image type is Quad PTZ or Single PTZ. |
| Privacy Zone | On / Off (up to 8 zones available) |
| VIQS | On / Off (up to 8 zones) Only for sheye image. |
| Camera Title (OSD) | On / Off Up to 20 characters (alphanumeric characters, marks) * You can specify characters to be displayed on each of the four screens when “Quad streams” is selected. |
| Back focus | Auto back focus / Focus / Adjusting method (Auto/ Preset/ Fix) |
| Video analytics | Optional Alarm : Intruder detection, Object detection, Cross line detection, Loitering detection, Scene change detection Others: Heat-map, People Counting, MOR(Moving Object Remover) * Alarm and others don't work as the same time. |
| Rotation | mechanical : -45° to 45°, electrical : Panorama/Double Panorama : 90°,180°, 270°, Fisheye : N/A |
Lens
| COMPONENT | SPECIFICATION |
|---|---|
| Focal Length | 1.38 mm {1/16 inches} |
| Angular Field of View | Horizontal : 180° Vertical : 180° |
| Maximum Aperture Ratio | 1 : 1.9 |
| Adjusting angle | ±45° |
| Image rotation | Mechanical Image rotation, about every 3.3° |
Browser GUI
| COMPONENT | SPECIFICATION |
|---|---|
| Camera Control | Brightness, AUX On / Off |
| Display Mode | Spot, Quad : Image from 16 cameras can be displayed in 4 different Quad screens or 16 split screen (JPEG only). 20 characters camera title available. |
| Zoom | electronic zoom |
| Camera Title | Up to 20 alphanumeric characters |
| Clock Display | Time : 12H/24H, Date: 5 formats on the browser, Summer time (Manual) |
| Alarm Control | Reset |
| One Shot Capture | A still picture will be displayed on a newly opened window. |
| Audio | Mic (Line) Input: On / Off Volume adjustment: Low / Middle / High Audio Output : On / Off Volume adjustment: Low / Middle / High |
| SD Memory Data Download | Still or motion Images recorded in the SDXC/SDHC/SD memory card can be downloaded. |
| GUI/Setup Menu Language | English, Italian, French, German, Spanish, Portuguese, Russian, Chinese, Japanese |
| System Log | Up to 100 (Internal), Up to 4,000 (SDXC/SDHC/SD memory when the recording format is set to JPEG.) error logs |
| Supported OS | Microsoft® Windows® 8.1 Microsoft® Windows® 8 Microsoft® Windows® 7 Microsoft® Windows Vista® |
| Supported Browser | Windows® Internet Explorer® 11(32 bit) Windows® Internet Explorer® 10 (32 bit) Windows® Internet Explorer® 9 (32 bit) Windows® Internet Explorer® 8 (32 bit) Windows® Internet Explorer® 7 (32 bit) |
Network
| COMPONENT | SPECIFICATION |
|---|---|
| Network IF | 10Base-T / 100Base-TX, M12 connector (female) |
| Resolution: H.264 JPEG (MJPEG) <Ceiling> <Wall> | •9M Fisheye mode (Factory default mode) max.15 fps 2992×2992 / 1280×1280 / 640×640 / 320×320 •4M Fisheye mode max.30 fps 2048×2048 / 1280×1280 / 640×640 / 320×320 |
| Resolution: H.264 JPEG (MJPEG) <Ceiling> | •Double Panorama mode max.15 fps 2560×1440 / 1920×1080 / 1280×720 / 640×360 / 320×180 •Quad PTZ / Single PTZ mode max.15 fps 2560×1920 / 2048×1536 / 1600×1200 / 1280×960 / 800×600 / 640×480 / 320×240 •8M Fisheye + Double Panorama mode max.7.5 fps (Fisheye) 2816×2816 / 1280×1280 / 640×640 / 320×320 (Double Panorama)1280×720 / 640×360 •4M Fisheye + Double Panorama mode max.15 fps (Fisheye) 2048×2048 / 1280×1280 / 640×640 / 320×320 (Double Panorama)1280×720 / 640×360 •8M Fisheye + Quad PTZ mode max.7.5 fps (Fisheye) 2816×2816 / 1280×1280 / 640×640 / 320×320 (Quad PTZ) 1280×960 / 800×600 / 640×480 •4M Fisheye + Quad PTZ mode max.15 fps (Fisheye)2816×2816 / 1280×1280 / 640×640 / 320×320 (Quad PTZ) 1280×960 / 800×600 / 640×480 •Quad streams mode (H.264 only) (Ch1 - Ch4) 1280×960 / 800×600 / 640×480 / 320×240 max.15 fps (Quad PTZ) 2560×1920 / 2048×1536 / 1280×960 / 800×600 / 640×480 / 320×240 max.5 fps |
| Resolution: H.264 JPEG (MJPEG) <Wall> | •Panorama mode max.15 fps 2560×1440 / 1920×1080 / 1280×720 / 640×360 / 320×180 •Quad PTZ / Single PTZ mode max.15 fps 2560×1920 / 2048×1536 / 1600×1200 / 1280×960 / 800×600 / 640×480 / 320×240 •8M Fisheye + Panorama mode max.7.5 fps (Fisheye) 2816×2816 / 1280×1280 / 640×640 / 320×320 (Panorama) 1280×720 / 640×360 •4M Fisheye + Panorama mode max.15 fps (Fisheye) 2048×2048 / 1280×1280 / 640×640 / 320×320 (Panorama) 1280×720 / 640×360 |
| H.264 | [Transmission Mode] Constant bit rate / VBR / Frame rate / Best effort / Advanced VBR [Frame Rate] <When VBR / Frame rate / Advanced VBR is selected> 1 fps/ 3 fps/ 5 fps*/ 7.5 fps*/ 10 fps*/ 12 fps*/ 15 fps*/ 20 fps*/ 30 fps* * "Frame rate*" is limited to "Bit rate". When a value with an asterisk (*) on the right of it is selected, the actual frame rate may be lower that the value selected. [Max Bit Rate/Client] 64 kbps / 128 kbps* / 256 kbps* / 384 kbps* / 512 kbps* / 768 kbps* / 1024 kbps* / 1536 kbps* / 2048 kbps* / 3072 kbps* / 4096 kbps* / 6144 kbps* / 8192 kbps* / 10240 kbps* / 12288 kbps* / 14336 kbps* / 16384 kbps* / 20480 kbps* / 24576 kbps* / 30720 kbps* * The available range of the H.264 bit rate varies depending on the setting selected for “Image capture size”. [Image Quality] <When Constant bit rate/ Best effort is selected> Low/ Normal/ Fine <When VBR is selected> 0 SUPER FINE / 1 FINE / 2 / 3 / 4 / 5 NORMAL / 6 / 7/ 8 / 9 LOW [Refresh Interval] 0.2 / 0.25 / 0.33 / 0.5 / 1 / 2 / 3 / 4 / 5 s [Smart Coding mode] On (Low / Mid / High) / Off (Only when "Variable bit rate" is selected) [Transmission Type] UNICAST / MULTICAST |
| JPEG | [Image Quality] 0 SUPER FINE / 1 FINE / 2 / 3 / 4 / 5 NORMAL / 6 / 7 / 8 / 9 LOW (10 steps : 0-9) [Transmission Type] PULL / PUSH [Transmission interva] 0.1 fps - 30 fps (JPEG frame rate will be restricted when displaying both JPEG and H.264 images.) |
| Audio Compression | G.726 (ADPCM) 32 kbps/16 kbps, G.711 64 kbps / AAC-LC 64kbps / 96kbps / 128kbps |
| Total Bit Rate | Unlimited / 64 / 128 / 256 / 384 / 512 / 768 / 1,024 / 2,048 / 4,096 / 8,192 kbps |
| Supported Protocol | IPv6 : TCP/IP, UDP/IP, HTTP, HTTPS, RTP, FTP, SMTP, DNS, NTP, SNMP, DHCPv6, MLD, ICMP, ARP IPv4 : TCP/IP, UDP/IP, HTTP, HTTPS, RTSP, RTP, RTP/RTCP, FTP, SMTP, DHCP, DNS, DDNS, NTP, SNMP, UPnP, IGMP, ICMP,ARP |
| FTP Client | Alarm image transmission, FTP periodic transmission (When the FTP transmission is failed, backup on an optional SD memory card is available.) |
| No. of Simultaneous Users | Up to 14 users (Depends on network conditions) |
| SDXC/SDHC/SD Memory Card (Option) | SD (SDHC/SDXC) card: Panasonic 2 GB, 4 GB*, 8 GB*, 16 GB*, 32 GB*, 64 GB** model *SDHC card, ** SDXC card (except miniSD card and microSD card) |
| Cellular Phone Compatibility | JPEG image, AUX control (by access level) |
| Mobile Terminal Compatibility | iPad, iPhone, iPod touch (iOS 4.2.1 or later) Android™ mobile terminals |
Alarm
| COMPONENT | SPECIFICATION |
|---|---|
| Alarm Source | 3 terminals input, VMD, Command alarm |
| Alarm Actions | SDXC/SDHC/SD memory recording, E-mail noti cation, HTTP alarm noti cation Indication on browser, FTP image transfer, Panasonic protocol output |
| Alarm Log | SDXC/SDHC/SD memory recording, E-mail noti cation, HTTP alarm noti cation Indication on browser, FTP image transfer, Panasonic protocol output |
| Schedule | Alarm / VMD / Access permission / H.264 recording / Scene fi le |
Input/Output
| COMPONENT | SPECIFICATION |
|---|---|
| Monitor output | VBS : 1.0 V [p-p]/75 Ω, composite, ø3.5 mm mini jack (monaural) An NTSC or PAL monitor can be connected to the camera (the monitor type can be changed by the software). Audio out or monitor out can be selected for the audio/monitor output plug |
| Microphone/Line Input | ø3.5 mm monaural mini jack, Input impedance: Approx. 2 kΩ For microphone input : Recommended applicable microphone : Plug-in power type Supply voltage : 2.5 V ±0.5 V Recommended sensitivity of microphone : -48 dB ±3 dB (0 dB=1 V/Pa, 1 kHz) For line input : Input level: Approx. –10 dBV |
| Audio Output | ø3.5 mm stereo mini jack Output impedance : Approx. 600 Ω (unbalanced) Output level : –20 dBV |
| External I/O Terminals | ALARM IN1 (DAY/NIGHT IN), ALARM IN2 (ALARM OUT), ALARM IN3 (AUX OUT) |
General
| COMPONENT | SPECIFICATION |
|---|---|
| Mounting method | Ceiling / Wall |
| Safety | UL (UL60950-1), C-UL (CAN/CSA C22.2 No.60950-1), CE, IEC60950-1 |
| EMS | FCC (Part15 ClassA), ICES003 ClassA, EN55022 ClassB, EN55024 |
| Power Source and Power Consumption | DC 12 V, PoE (IEEE802.3af compliant) / DC12 V : 910 mA / Approx. 10.9 W PoE DC 48 V : 200 mA / Approx. 9.6 W (Class 0 device) |
| Ambient Operating Temperature | -40 °C to +50 °C (-40 °F to 122 °F) |
| Ambient Operating Humidity | 10% to 90 % (no condensation) |
| Water and Dust Resistance | IP66, IEC60529 measuring standard compatible, Type 4X(UL50), NEMA 4X compliant |
| Shock Resistance | Compliant with 50J (IEC 60068-2-75 / IK10 (IEC 62262) |
| Railway Application | EN50155-T3, EN50121, DIN5510 |
| Dimensions | When using the attachment plate : ø154 mm × 60.5 mm (H) {ø6-1/16 inches × 2-3/8 inches (H)} Dome radius 35 mm {1-3/8 inches} When using the base bracket: ø164 mm × 96.5 mm (H) {ø6-15/32 inches × 3-13/16 inches (H)} Dome radius 35 mm {1-3/8 inches} |
| Mass (Approx.) | When using the attachment plate : Approx. 860 g {1.90 lbs} When using the base bracket : Approx. 1.3 kg {2.87 lbs} |
| Finish | Main body : Aluminum die cast, light gray Dome section : Clear polycarbonate resin |
Specifications
Firmware/Software
Image/CAD/BIM
Other
Specifications
Data Sheet
Letter Size
A&E Spec Sheet
A&E NTSC/PAL
Manuals
Installation Guide
User Manual/Operating Instruction
WV-SFV481 etc. New functions and addendum (Chinese)
New functions added by software upgrade
WV-SFV481 etc. New functions and addendum (English)
New functions added by software upgrade
Corrigenda for Operating Instructions
Firmware/Software
Firmware
NTSC/PAL
How to upgrade firmware in 2 steps.
(Click here for detail)
-
In case of firmware updating from 1.xx to 2.xx, you have to upgrade version 9.99 once, then upgrade 2.xx. Also for upgarding from 2.xx to 4.10 (or earlier), you have to upgrade version 4.00 once, then upgrade 4.10 (or later).
-
Please click here to request the firmware version 9.99 as providing the firmware is on request only; complete the form with the model number of your camera and "Request firmware version 9.99", then click "Submit" button.
Please clear the cache memory or access with another internet browser if you cannot access the form.
- To users of WV-SAE200 TYPE3 version 1.15 (or older). Please upgrade both firmware version 2.01 (or newer) and WV-SAE200 TYPE3 version 1.15 (or newer). Or, keep current firmware version with WV-SAE200 TYPE3 version 1.15 (or older).
WV-SFV481, SFN480 Firmware (Chinese)
Chinese
How to upgrade firmware in 2 steps.
(Click here for detail)
-
In case of firmware updating from 1.xx to 2.xx, you have to upgrade version 9.99 once, then upgrade 2.xx. Also for upgarding from 2.xx to 4.10 (or earlier), you have to upgrade version 4.00 once, then upgrade 4.10 (or later).
-
Please click here to request the firmware version 9.99 as providing the firmware is on request only; complete the form with the model number of your camera and "Request firmware version 9.99", then click "Submit" button.
Please clear the cache memory or access with another internet browser if you cannot access the form.
- To users of WV-SAE200 TYPE3 version 1.15 (or older). Please upgrade both firmware version 2.01 (or newer) and WV-SAE200 TYPE3 version 1.15 (or newer). Or, keep current firmware version with WV-SAE200 TYPE3 version 1.15 (or older).
Release Note
Image/CAD/BIM
Image Data
CAD Data
BIM Data
Building information models (BIMs) files
Other
Technical Document
How to firmware two-stage version up
How to upgrade firmware version 2.00 (or newer) in 2 steps and/or version 4.10 (or newer).
WV-SW397, SFN311 etc. Addendum
Added to Compatible SDXC memory cards
WV-SW397, SFN311 etc. Addendum (Chinese)
Added to Compatible SDXC memory cards
WV-SW598, WV-SFN310 etc. Addendum
To prevent unintended camera access by unkown party
WV-SW598, WV-SFN310 etc. Addendum (Chinese)
To prevent unintended camera access by unkown party