1. Home
  2. Surveillance
  3. Products
  4. WV-S1531LNS

Bullet / Box cameras

WV-S1531LNS i-PRO

2MP(1080p) Outdoor Bullet Network Camera with Heavy Salt Damage Resistance

DISCONTINUED PRODUCT

  • 2MP (1080p) 1080p 60fps
  • iA (intelligent Auto)
  • Extreme Super Dynamic 144dB
  • Color night vision (0.0008 to 0.012 lx)
  • H.265 Smart Coding
  • ClearSight Coating
  • Heavy salt damage resistance specifications (ISO 14993 compliant)
  • i-VMD License Bundled
  • NDAA Compliant

Precautions for heavy salt damage resistance

Successor model : WV-S1536LNS

  • Heavy Salt Damage

Extreme image quality allows evidence to be captured even under challenging conditions
- Auto Shutter speed control for fast moving vehicles
- Sharp and clear images of a walking person day & night
- Outstanding low light performance in true color with low noise for night time applications
- Super Dynamic 144dB for backlit situations involving headlights and shadows on night streets

Extreme H.265 compression with new Smart Coding
- Longer recording and less storage compared to any H.264 based compression techniques
- New self-learning ROI* encoding (Auto VIQS) detects movement within the image and compresses the areas with little motion in
order to reduce transmitted data while maintaining the quality of the image.
- New “Smart Facial Coding” adds more bandwidth reduction for ID camera applications mainly capturing faces
* Region of Interest

Extreme Data Security
- Full encryption SD card edge recording to keep your data safe
- FIPS 140-2 Level 1 compliant
- Full end-to-end system encryption with supported VMS and devices to protect from IP snooping/spoofing and detect data alteration
 

This 2MP (1,920 x 1,080) /60 fps Fixed Box Network Camera is based on the concept of "i-PRO EXTREME".

• Full HD 1080p 60fps

• iA (intelligent Auto)

• Extreme Super Dynamic 144dB

• Color night vision (0.0008 to 0.012 lx)

• H.265 Smart Coding

• FIPS 140-2 Level 1 compliant

• ClearSight Coating

• Salt-air corrosion resistant

Camera

COMPONENT SPECIFICATION
Image Sensor Approx. 1/3 type MOS image sensor
Minimum Illumination Color : 0.012 lx, BW : 0.006 lx
(F1.6, Maximum shutter : Off (1/30s), AGC : 11)
BW : 0 lx
(F1.6, Maximum shutter : Off (1/30 s), AGC : 11, when the IR LED is lit)
Color : 0.0008 lx, BW : 0.0004 lx
(F1.6, Maximum shutter : max. 16/30s, AGC : 11)
White Balance AWC (2,000 - 10,000 K), ATW1 (2,700 - 6,000 K), ATW2 (2,000 - 6,000 K)
Shutter Speed 1/30 Fix to 1/10000 Fix
*1/30 Fix to 2/120 Fix is available during 30 fps mode only.
*1/60 Fix is available during 60 fps mode only.
Intelligent Auto On / Off
Super Dynamic On / Off, The level can be set in the range of 0 to 31.
Dynamic Range 144 dB (Super Dynamic : On)
Adaptive Black Stretch The level can be set in the range of 0 to 255.
Back Light Compensation/High Light Compensation BLC (Back light compensation) / HLC (High light compensation) / Off
(only when Super dynamic / Intelligent Auto : Off)
Fog Compensation On / Off (only when Intelligent auto / auto contrast adjust : Off)
Maximum Gain The level can be set in the range of 0 to 11.
Color/BW (ICR) Off / On(IR Light Off) / On(IR Light On) / Auto1(IR Light Off) /
Auto2(IR Light On) / Auto3(SCC)
IR LED Light High/ Middle/ Low/ Off
Maximum irradiation distance: 40 m {Approx. 131 ft}
Digital Noise Reduction The level can be set in the range of 0 to 255.
Video Motion Detection (VMD) On / Off, 4 areas available
Intelligent VMD (i-VMD) Type 4 *Bundled License
Stabilizer On / Off (available only in the 30 fps mode)
Privacy Zone On / Off (up to 8 zones available)
Image Rotation 0 ° / 90 ° / 180 ° / 270 °
Camera Title (OSD) On / Off Up to 20 characters (alphanumeric characters, marks)
Focus Adjustment Auto back focus / Manual

Lens

COMPONENT SPECIFICATION
Focal length 2.8 - 10 mm {1/8 inches - 13/32 inches}
Zoom Ratio 3.6 x (Motorized zoom / Motorized focus)
Angular Field of View [16 : 9 mode] Horizontal : 31° (TELE) – 112° (WIDE)
Vertical : 17° (TELE) – 60° (WIDE)
[4 : 3 mode] Horizontal : 26° (TELE) – 91° (WIDE)
Vertical : 19° (TELE) – 67° (WIDE)
Maximum Aperture Ratio 1 : 1.6 (WIDE) – 1 : 3.4 (TELE)
Focus range 0.3 m {11-13/16 inches} – ∞

Adjusting Angle

COMPONENT SPECIFICATION
Ceiling mounting Horizontal : ±180 ° (Adjust by horizontal (PAN) angle)
Vertical : 0 ° to 100 ° (Adjust by vertical (TILT) angle)
Yaw : –190 ° to +100 ° (Adjust by azimuth (YAW) angle)
Wall mounting Horizontal : ±100 ° (Adjust by vertical (TILT) angle)*
Vertical : ±100 ° (Adjust by vertical (TILT) angle)*
Yaw : –190 ° to +100 ° (Adjust by azimuth (YAW) angle)
*You can change between horizontal and vertical angels by adjusting
the horizontal (PAN) angle.

Browser GUI

COMPONENT SPECIFICATION
Camera Control Brightness, AUX On / Off
Audio Mic (Line) Input : On / Off Volume adjustment : Low / Middle / High
Audio Output : On / Off Volume adjustment : Low / Middle / High
GUI / Setup Menu Language English, Italian, French, German, Spanish, Portuguese, Russian, Chinese, Japanese
Browser Microsoft Edge, Firefox, Google Chrome

Network

COMPONENT SPECIFICATION
Network IF 10Base-T / 100Base-TX, RJ45 connector
Resolution H.265/ H.264/ JPEG (MJPEG) •2 mega pixel [16 : 9] (30/60 fps)
1,920 x 1,080 / 1,280 x 720 / 640 x 360 / 320 x 180
•3 mega pixel [4 : 3] (30 fps)
2,048 x 1,536* / 1,280 x 960 / 800 x 600 / 640 x 480 / 400 x 300 / 320 x 240
*Used by super resolution techniques
H.265/H.264 [Transmission Mode]
Constant bit rate / VBR / Frame rate / Best effort
[Transmission Type]
Unicast / Multicast
JPEG [Image Quality]
10 steps
Smart Coding Smart Facial Coding : On (Smart Facial Coding*) / On (Auto VIQS) / Off
*Smart Facial Coding is only available with Stream(1).
GOP (Group of pictures) : On (Advanced)* / On (Mid) / On (Low) / Off
*On(Advanced) is only available with H.265.
Audio Compression G.726 (ADPCM) : 16 kbps / 32 kbps,
G.711 : 64 kbps,
AAC-LC : 64 kbps / 96 kbps / 128 kbps
Audio Transmission Mode Off / Mic (Line) input / Audio output / Interactive (Half duplex) /
Interactive (Full duplex)
Supported Protocol IPv6 : TCP/IP, UDP/IP, HTTP, HTTPS, RTP, FTP, SMTP, DNS, NTP,
SNMP, DHCPv6, MLD, ICMP, ARP, IEEE 802.1X, DiffServ
IPv4 : TCP/IP, UDP/IP, HTTP, HTTPS, RTSP, RTP, RTP/RTCP, FTP,
SMTP, DHCP, DNS, DDNS, NTP, SNMP, UPnP, IGMP, ICMP,
ARP, IEEE 802.1X, DiffServ
No. of Simultaneous Users Up to 14 users (Depends on network conditions)
SDXC/SDHC/SD Memory Card H.265 / H.264 recording :
Manual REC / Alarm REC (Pre/Post) / Schedule REC /
Backup upon network failure
JPEG recording :
Manual REC / Alarm REC (Pre/Post) / Backup upon network failure
Compatible SDXC/SDHC/SD Memory Card :
Panasonic 2 GB, 4 GB*, 8 GB*, 16 GB*, 32 GB*, 64 GB**, 128 GB**, 256 GB** model
*SDHC card, ** SDXC card (except miniSD card and microSD card)
Mobile Terminal Compatibility iPad, iPhone, AndroidTM mobile terminals

Alarm

COMPONENT SPECIFICATION
Alarm Source 3 terminals input, VMD alarm, Command alarm, Audio detection alarm
Alarm Actions SDXC/SDHC/SD memory recording, E-mail notification,
HTTP alarm notification Indication on browser, FTP image transfer,
Panasonic alarm protocol output

Input/Output

COMPONENT SPECIFICATION
Monitor Output (for Adjustment) VBS : 1.0 V [p-p] / 75 Ω, composite, Pin jack
An NTSC or PAL signal can be outputted from camera
Audio input ø3.5 mm stereo mini jack
Input impedance: Approx. 2 kΩ (unbalanced)
(Applicable microphone : Plug-in power type)
Supply voltage : 2.5 V ±0.5 V
Audio Output ø3.5 mm stereo mini jack (monaural output)
Output impedance : Approx. 600 Ω (unbalanced)
External I/O Terminals ALARM IN1(Alarm input 1/ Black & white input/ Auto time adjustment input),
ALARM IN2(Alarm input 2/ ALARM OUT), ALARM IN3(Alarm input 3/ AUX OUT) (x1 for each)

General

COMPONENT SPECIFICATION
Safety UL (UL60950-1), c-UL (CSA C22.2 No.60950-1), CE, IEC60950-1
EMC FCC (Part15 ClassA), ICES003 ClassA, EN55032 ClassB, EN55024
Power Source and Power Consumption DC power supply : DC12 V 750 mA, Approx. 9.0 W
PoE (IEEE802.3af compliant) Device :
DC48 V 195 mA, Approx. 9.4 W (Class 0 device)
Ambient Operating Temperature -40 °C to +60 °C (-40 °F to 140 °F)
(Power On range : –30 °C to +60 °C {–22 °F to +140 °F})
Ambient Operating Humidity 10 to 100 % (no condensation)
Water and Dust Resistance IP66 (IEC60529), Type 4X(UL50), NEMA 4X compliant
Shock Resistance IK10 (IEC 62262)
Salt damage resistance ISO14993 compliant
Dimensions *Installing using the base bracket 130 mm (W) x 130 mm (H) x 337 mm (L)
{5-1/8 inches (W) x 5-1/8 inches (H) x 13-9/32 inches (L)}
Mass (approx.) Approx. 1.6 kg {3.53 lbs} When using the adapter box : Approx. 2.1 kg {4.63 lbs}
Finish Main body : Almium die cast with salt resistance painting and resin
Metallic silver Outer fixing screw : SUS (Corrosion-resistant treatment)
Front cover : Polycarbonate resin (with ClearSight coating),Clear
Other WV-S1531LNS : Heavy salt damage resistance specifications (ISO 14993 compliant)

NOTES

Important
– Safety Precautions : Carefully read the Basic Information,Installation Guide and Operating Instructions before using this product.
– i-PRO Co., Ltd. cannot be held responsible for the performance of the network and/or other manufacturers' products used on the network.
– Masses and dimensions are approximate.
– Specifications are subject to change without notice.
Trademarks and registered trademarks
– iPad and iPhone are trademarks of Apple Inc., registered in the U.S.and other countries. – Android is a trademark of Google LLC.
– ONVIF is a trademark of ONVIF, Inc.
– All other trademarks identified herein are the property of their respective owners
©i-PRO Co., Ltd All rights reserved / November 2022

Manual files

Installation Guide

Operating Instruction

WV-S2531LN etc. Operating Instructions (English)

WV-S2531LN etc. Operating Instructions (English)

Click the file title, then click the Related Files bar to show list of related file(s).
WV-S2531LN etc. Operating Instructions (French)

WV-S2531LN etc. Operating Instructions (French)

Click the file title, then click the Related Files bar to show list of related file(s).
WV-S2531LN etc. Operating Instructions (Russian)

WV-S2531LN etc. Operating Instructions (Russian)

Click the file title, then click the Related Files bar to show list of related file(s).

Marketing Files

Data sheet

Others

Technical Document

How to firmware two-stage version up

How to firmware two-stage version up

How to upgrade firmware version 2.00 (or newer) in 2 steps and/or version 4.10 (or newer).

Certificate of Compliance

Image/CAD/BIM

Image Data

CAD Data

BIM

WV-S15x1LN BIM

WV-S15x1LN BIM

Building information models (BIMs) files

Marketing

A&E Spec Sheet

Firmware/Software

Firmware

WV-S1132 etc. Firmware

WV-S1132 etc. Firmware

NTSC/PAL
   How to upgrade firmware in 2 steps.
   (Click here for detail)

  • In case of firmware updating from 1.xx/2.00 to 4.10(or later), you have to upgrade version 4.00/4.01/4.02 once, then upgrade 4.10 (or later).

Please note that downloading service for the file of firmware version 4.00/4.01 are unavailable.
We apologize for any inconvenience this may cause.
 

Release Note

Close