Bullet / Box cameras

WV-S1131 i-PRO

2MP(1080p) Indoor Box Network Camera

DISCONTINUED PRODUCT

2MP / 1,920 x 1,080 60 fps H.265 Network Camera featuring Super Dynamic

  • 2MP (1080p) 1080p 60fps
  • iA (intelligent Auto)
  • Extreme Super Dynamic 144dB
  • Color night vision (0.0007 to 0.01 lx)
  • H.265 Smart Coding
  • i-VMD License Bundled
  • NDAA Compliant

This Full HD (1,920 x 1,080) Fixed Box Network Camera is based on the concept of "i-PRO EXTREME".


• Extreme Super Dynamic technologies deliver 144 dB wide dynamic range

• Intelligent Auto (iA) feature provides increased discernibility even in environments with poor visibility

• High sensitivity with Day/Night (ICR*) function : 0.01 lx (Color), 0.004 lx (B/W) at F1.4
 *ICR : IR Cut filter Removal

• H.265 compression and Smart coding technology realize high image quality streaming at low bit rates

• Intelligent Face Compression provides high picture quality at “Face best shot area” while reducing other non-important areas to save the network bandwidth and the disk space of recorder.

• Encryption and alteration detection functions enhanced the security.

• The Easy Kitting Package makes setting camera easy.

Camera

COMPONENT SPECIFICATION
Image Sensor Approx. 1/2.8 type CMOS image sensor
Minimum Illumination Color : 0.01 lx, BW : 0.004 lx
(F1.4, Maximum shutter : Off (1/30s), AGC : 11)
Color : 0.0007 lx, BW : 0.0003 lx
(F1.4, Maximum shutter : max. 16/30s, AGC : 11)
White Balance AWC (2,000 - 10,000 K), ATW1 (2,700 - 6,000 K), ATW2 (2,000 - 6,000 K)
Maximum shutter 1/30 Fix to 1/10000 Fix
*1/30 Fix to 2/120 Fix is available during 30 fps mode only.
*1/60 Fix is available during 60 fps mode only.
Intelligent Auto On / Off
Super Dynamic On / Off, The level can be set in the range of 0 to 31.
Dynamic Range 144 dB (Super Dynamic : On)
Adaptive Black Stretch The level can be set in the range of 0 to 255.
Back Light Compensation/High Light Compensation BLC (Back light compensation) / HLC (High light compensation) /
Off (only when Super dynamic / Intelligent Auto : Off)
Fog Compensation On / Off (only when Intelligent auto / auto contrast adjust: Off)
Maximum gain (AGC) The level can be set in the range of 0 to 11.
Color/BW (ICR) Off / On / Auto1 (Normal) / Auto2 (IR Light) / Auto3 (SCC)
Digital Noise Reduction The level can be set in the range of 0 to 255.
Video Motion Detection (VMD) On / Off, 4 areas available
Intelligent VMD (i-VMD) Type 4 *Bundled License
Stabilizer On / Off (available only in the 30 fps mode)
Privacy Zone On / Off (Up to 8 zones available)
Image Rotation 0 ° / 90 ° / 180 ° / 270 °
Camera Title (OSD) On / Off, Up to 20 characters (alphanumeric characters, marks)
Focus Adjustment Auto back focus / Manual

Browser GUI

COMPONENT SPECIFICATION
Camera Control Brightness, AUX On / Off
Audio Mic (Line) Input : On / Off Volume adjustment : Low / Middle / High
Audio Output : On / Off Volume adjustment : Low / Middle / High
GUI / Setup Menu Language English, Italian, French, German, Spanish, Portuguese, Russian,
Chinese, Japanese

Network

COMPONENT SPECIFICATION
Network IF 10Base-T / 100Base-TX, RJ45 connector
Resolution H.265/H.264 JPEG (MJPEG) •2 mega pixel [16 : 9] (30/60 fps)
1,920 x 1,080 / 1,280 x 720 / 640 x 360 / 320 x 180
•3 mega pixel [4 : 3] (30 fps)
2,048 x 1,536 / 1,280 x 960 / 800 x 600 / 640 x 480 / 400 x 300 / 320 x 240
H.265/ H.264 [Transmission Mode]
Constant bit rate / VBR / Frame rate / Best effort
[Transmission Type]
Unicast / Multicast
JPEG [Image Quality]
10 steps
Smart Coding Smart Facial Coding : On (Smart Facial Coding*) / On (Auto VIQS) / Off
*Smart Facial Coding is only available with Stream(1).
GOP (Group of pictures) : On (Advanced)* / On (Mid) / On (Low) / Off
*On(Advanced) is only available with H.265.
Audio Compression G.726 (ADPCM) : 16 kbps / 32 kbps
G.711 : 64 kbps
AAC-LC : 64 kbps / 96 kbps / 128 kbps
Audio Transmission Mode Off / Mic (Line) input / Audio output / Interactive (Half duplex) /
Interactive (Full duplex)
Supported Protocol IPv6 : TCP/IP, UDP/IP, HTTP, HTTPS, RTP, FTP, SMTP, DNS, NTP,
SNMP, DHCPv6, MLD, ICMP, ARP, IEEE 802.1X, DiffServ
IPv4 : TCP/IP, UDP/IP, HTTP, HTTPS, RTSP, RTP, RTP/RTCP, FTP,
SMTP, DHCP, DNS, DDNS, NTP, SNMP, UPnP, IGMP, ICMP,
ARP, IEEE 802.1X, DiffServ
No. of Simultaneous Users Up to 14 users (Depends on network conditions)
SDXC/SDHC/SD Memory Card H.265 / H.264 recording :
Manual REC / Alarm REC (Pre/Post) / Schedule REC /
Backup upon network failure
JPEG recording :
Manual REC / Alarm REC (Pre/Post) / Backup upon network failure
Compatible SDXC/SDHC/SD Memory Card :
Panasonic 2 GB, 4 GB*, 8 GB*, 16 GB*, 32 GB*, 64 GB**, 128 GB**, 256 GB** model
*SDHC card, ** SDXC card (except miniSD card and microSD card)
Mobile Terminal Compatibility iPad, iPhone, AndroidTM mobile terminals

Alarm

COMPONENT SPECIFICATION
Alarm Source 3 terminals input, VMD alarm, Command alarm, Audio detection alarm
Alarm Actions SDXC/SDHC/SD memory recording, E-mail notification,
HTTP alarm notification, Indication on browser, FTP image transfer,
Panasonic alarm protocol output

Input/Output

COMPONENT SPECIFICATION
Monitor Output (for Adjustment) VBS : 1.0 V [p-p] / 75 Ω, composite, Pin jack
An NTSC or PAL signal can be outputted from camera
Audio input ø3.5 mm stereo mini jack
Input impedance : Approx. 2 kΩ (unbalanced)
(Applicable microphone : Plug-in power type)
Supply voltage : 2.5 V ±0.5 V
Audio Output ø3.5 mm stereo mini jack (monaural output)
Output impedance : Approx. 600 Ω (unbalanced)
External I/O Terminals ALARM IN 1 (Black & white input, Auto time adjustment input) (x1),
ALARM IN 2 (ALARM OUT) (x1), ALARM IN 3 (AUX OUT) (x1)

General

COMPONENT SPECIFICATION
Safety UL (UL60950-1), c-UL (CSA C22.2 No.60950-1), CE, IEC60950-1
EMC FCC (Part15 ClassA), ICES003 ClassA, EN55032 ClassB, EN55024
Power Source and Power Consumption DC power supply : DC12 V 460 mA, Approx. 5.6 W
PoE (IEEE802.3af compliant) Device :
DC48 V 120 mA, Approx. 5.8 W (Class 2 device
Ambient Operating Temperature -10 °C to +50 °C (14 °F to 122 °F)
Ambient Operating Humidity 10 to 90 % (no condensation)
Dimensions 75 mm (W) x 57 mm (H) x 146 mm (D)
{2-15/16 inches (W) x 2-1/4 inches (H) x 5-3/4 inches (D)}
(excluding lens / power cord plug)
Mass (approx.) 350 g { 0.77 ibs.}
Finish Main body : PC / ABS resin (Sail white)

NOTES

Important
– Safety Precautions : Carefully read the Basic Information,Installation Guide and Operating Instructions before using this product.
– i-PRO Co., Ltd. cannot be held responsible for the performance of the network and/or other manufacturers' products used on the network.
– Masses and dimensions are approximate.
– Specifications are subject to change without notice.
Trademarks and registered trademarks
– iPad and iPhone are trademarks of Apple Inc., registered in the U.S.and other countries. – Android is a trademark of Google LLC.
– ONVIF is a trademark of ONVIF, Inc.
– All other trademarks identified herein are the property of their respective owners
©i-PRO Co., Ltd All rights reserved / November 2022

Manual files

Installation Guide

Operating Instruction

WV-S2531LN etc. Operating Instructions (English)

WV-S2531LN etc. Operating Instructions (English)

Click the file title, then click the Related Files bar to show list of related file(s).
WV-S2531LN etc. Operating Instructions (French)

WV-S2531LN etc. Operating Instructions (French)

Click the file title, then click the Related Files bar to show list of related file(s).
WV-S2531LN etc. Operating Instructions (Russian)

WV-S2531LN etc. Operating Instructions (Russian)

Click the file title, then click the Related Files bar to show list of related file(s).

Marketing Files

Data sheet

Others

Technical Document

How to firmware two-stage version up

How to firmware two-stage version up

How to upgrade firmware version 2.00 (or newer) in 2 steps and/or version 4.10 (or newer).

Certificate of Compliance

Image/CAD/BIM

Image Data

CAD Data

WV-S1131 CAD Drawing DXF

WV-S1131 CAD Drawing DXF

WV-S1131 CAD Drawing DXF
WV-S1131 CAD Drawing PDF

WV-S1131 CAD Drawing PDF

WV-S1131 CAD Drawing PDF

BIM

WV-S113x, S111x BIM

WV-S113x, S111x BIM

Building information models (BIMs) files

Marketing

A&E Spec Sheet

Firmware/Software

Firmware

WV-S1132 etc. Firmware

WV-S1132 etc. Firmware

NTSC/PAL
   How to upgrade firmware in 2 steps.
   (Click here for detail)

  • In case of firmware updating from 1.xx/2.00 to 4.10(or later), you have to upgrade version 4.00/4.01/4.02 once, then upgrade 4.10 (or later).

Please note that downloading service for the file of firmware version 4.00/4.01 are unavailable.
We apologize for any inconvenience this may cause.
 

Release Note

Close