Repainting Instruction

June, 2023:
Updated the instructions of  "WV-S1500,S15000 Series" and "WV-S2100 Series"

1. Attention

Precautions For All Models

Follow the instructions below for repainting products.

  • Apply a primer before repainting to improve paint adhesion.
  • Use spray paint for repainting.
  • As cameras contain precision parts, do not use baked enamel finishes or dip coatings for repainting.
  • Do not disassemble the product or hang the product grabbing the cable when repainting, as they may result in device failure, breakage of the cable, etc.
  • Air dry the product after repainting.  Do not apply heat using an equipment such as a dryer as it may result in the failure of the precision parts in the product.  
  • Mask the blue highlighted areas illustrated below before repainting. 
  • When repainting a model with ClearSight coating, the dome cover must be masked with its original protective sheet left attached to protect the coating.
     

2. Repainting Instructions

Supported Models

WV-S1500,S15000 Series - WV-S1536L, S1536L-B, S1536LN, S1536LN-B, S1536LTN, S15500-F3L, S15500-F6L, S15500-V3L, S15500-V3LN, S15500-V3LN1, S15600-V2L, S15600-V2LN, S15700-V2L, S15700-V2LN, S1536LT, S1536LNS, S15700-V2LK, S15500-V3LK

WV-S2100 Series - WV-S2136, S2136-B, S2136G, S2136G-B, S2136L, S2136L-B, S2136LG, S2136LG-B

WV-S2200,S22000 Series - WV-S2236L, S22500-V3L, S22500-V3LG, S22500-V3L1, S22600-V2L, S22600-V2LG, S22700-V2L, S22700-V2LG, S22700-V2L1, S22500-F3L, S22500-F6L, S2236L-B, S2236LG, S2236LG-B

WV-S2500,S25000 Series - WV-S2536L, S2536LN, S2536LTN, S25500-V3L, S25500-V3LN, S25500-V3LG, S25500-V3LN1, S25600-V2L, S25600-V2LN, S25600-V2LG, S25700-V2L, S25700-V2LN, S25700-V2LG, S25700-V2LN1, S25500-F3L, S25500-F6L, S2536LG, S2536LGN, S2536LT

WV-S3100 Series - WV-S3111L, S3131L

WV-S3500 Series - WV-S3511L, S3512LM, S3531L, S3532LM

WV-S4500 Series - WV-S4556L, S4556LM, S4576L, S4576LM

WV-S6500,X6500,S65340 Series - WV-S6530N, X6511N, X6531N, X6531NS, S6530NS, S65340-Z2G, S65340-Z2K, S65340-Z2N, S65340-Z4G, S65340-Z4K, S65340-Z4N, S65340-Z2, S65340-Z2N1, S65340-Z4, S65340-Z4N1

WV-S65301,S65302,U65301,U65302 Series - WV-U65301-Z1, U65301-Z1G, U65302-Z2, U65302-Z2G, S65301-Z1, S65301-Z1G, S65302-Z2, S65302-Z2G, S65301-Z1-1, S65301-Z1S, S65302-Z2-1, S65501-Z1, S65501-Z1G

WV-S65300,U65300 Series - WV-U65300-ZY, U65300-ZYG, S65300-ZY, S65300-ZYG

WV-S8500 Series - WV-S8543, S8543G, S8543L, S8543LG, S8544, S8544G, S8544L, S8544LG, S8563L, S8563LG, S8564L, S8564LG, S8573L, S8573LG, S8574L, S8574LG

Video Instructions

Repainting Instruction for purchased i-PRO cameras - YouTube
 

WV-S1500,S15000 Series

Model No. WV-S1536L, S1536L-B, S1536LN, S1536LN-B, S1536LTN, S15500-F3L, S15500-F6L, S15500-V3L, S15500-V3LN, S15500-V3LN1, S15600-V2L, S15600-V2LN, S15700-V2L, S15700-V2LN, S1536LT, S1536LNS, S15700-V2LK, S15500-V3LK

Precautions

  • Attach the accessories to the camera before repainting.
  • Since the outer material is aluminum die casting and plastic, use paints compatible with aluminum die casting and plastic.
  • Mask the clear cover, inner part of sunshade, label, knurled part, ventilation opening, and bottom surface before repainting.

Back to top

 

WV-S2100 Series

Model No. WV-S2136, S2136-B, S2136G, S2136G-B, S2136L, S2136L-B, S2136LG, S2136LG-B

Precautions

  • Since the outer material is plastic, use paint compatible with plastic.
  • Mask the dome cover, MIC hole, and the bottom surface before repainting.
  • Do not paint the bottom surface because it has a nameplate on it.

Back to top

 

WV-S2200,S22000 Series

Model No. WV-S2236L, S22500-V3L, S22500-V3LG, S22500-V3L1, S22600-V2L, S22600-V2LG, S22700-V2L, S22700-V2LG, S22700-V2L1, S22500-F3L, S22500-F6L, S2236L-B, S2236LG, S2236LG-B

Precautions

  • Since the outer material is plastic, use paint compatible with plastic.
  • Mask the dome cover and the bottom surface before repainting.
  • Do not paint the bottom surface because it has a nameplate on it.

Back to top

 

WV-S2500,S25000 Series

Model No. WV-S2536L, S2536LN, S2536LTN, S25500-V3L, S25500-V3LN, S25500-V3LG, S25500-V3LN1, S25600-V2L, S25600-V2LN, S25600-V2LG, S25700-V2L, S25700-V2LN, S25700-V2LG, S25700-V2LN1, S25500-F3L, S25500-F6L, S2536LG, S2536LGN, S2536LT

Precautions

  • Since the outer material is aluminum die casting, use paint compatible with aluminum die casting.
  • Mask the dome cover and the bottom surface before repainting.
  • Do not paint the bottom surface because it has a nameplate on it.

Back to top

 

WV-S3100 Series

Model No. WV-S3111L, S3131L

Precautions

  • Since the outer material is plastic, use paint compatible with plastic.
  • Mask the dome cover, MIC holes, and the bottom surface before repainting.
  • Do not paint the bottom surface because it has a nameplate on it.

Back to top

 

WV-S3500 Series

Model No. WV-S3511L, S3512LM, S3531L, S3532LM

Precautions

  • Since the outer material is aluminum die casting, use paint compatible with aluminum die casting.
  • Mask the dome cover, MIC holes, bottom surface, LAN cable before repainting.
  • Do not paint the bottom surface because it has a nameplate on it.

Back to top

 

WV-S4500 Series

Model No. WV-S4556L, S4556LM, S4576L, S4576LM

Precautions

  • Since the outer material is aluminum die casting, use paint compatible with aluminum die casting.
  • Mask the dome cover, IR-LED cover, bottom surface, LAN cable and multi-cable before repainting.
  • Do not paint the bottom surface because it has a nameplate on it.

Back to top

 

WV-S6500,X6500,S65340 Series

Model No. WV-S6530N, X6511N, X6531N, X6531NS, S6530NS, S65340-Z2G, S65340-Z2K, S65340-Z2N, S65340-Z4G, S65340-Z4K, S65340-Z4N, S65340-Z2, S65340-Z2N1, S65340-Z4, S65340-Z4N1

Precautions

  • Since the outer material is plastic, use paint compatible with plastic.
  • Mask the dome cover and bottom surface before repainting.
  • Paint the accessories as well. (Applicable models: WV-X6531N, X6531NS ,X6511N, S6530N, S6530NS)
  • Do not paint the nameplate inside the main sunshield rear cover.

Back to top

 

WV-S65301,S65302,U65301,U65302 Series

Model No. WV-U65301-Z1, U65301-Z1G, U65302-Z2, U65302-Z2G, S65301-Z1, S65301-Z1G, S65302-Z2, S65302-Z2G, S65301-Z1-1, S65301-Z1S, S65302-Z2-1, S65501-Z1, S65501-Z1G

Precautions

  • Since the outer material is plastic, use paint compatible with plastic.
  • Paint the accessories as well in case of using it.

Back to top

 

WV-S65300,U65300 Series

Model No. WV-U65300-ZY, U65300-ZYG, S65300-ZY, S65300-ZYG

Precautions

  • Since the outer material is aluminum die casting, use paint compatible with aluminum die casting.
  • Mask the dome cover and the bottom surface before repainting.
  • Do not paint the bottom surface because it has a nameplate on it.

Back to top

 

WV-S8500 Series

Model No. WV-S8543, S8543G, S8543L, S8543LG, S8544, S8544G, S8544L, S8544LG, S8563L, S8563LG, S8564L, S8564LG, S8573L, S8573LG, S8574L, S8574LG

Precautions

  • Since the outer material is aluminum die casting and plastic, use paints compatible with aluminum die casting and plastic.
  • Mask the dome cover, IR-LED cover, and bottom surface before repainting.
  • Paint the plastic accessory as well.
  • Do not paint the bottom surface because it has a nameplate on it.

 

Back to top