WJ-GXE500 i-PRO

Encoder

DISCONTINUED PRODUCT

4CH H.264 Video Encoder

• Full frame H.264 transmission
• H.264 and JPEG triple encoding: A total of 3 outputs, comprising of 2 H.264 outputs and 1 JPEG output, can be provided.
• Motion adaptive interlace/progressive conversion allows every frame to be clear even when the subject is moving.
• Open command conversion table for RS485 ensures the control of various manufacture's PTZ camera.
• Camera title display: Up to 20 alphanumeric characters embedded in the image
• PoE. The power will be supplied by simply connecting a LAN cable.(IEEE802.3af compliant) 12 V DC power supply* is also available.
• Small size. And can be installed into the outdoor housing with a camera.
• Alarm sources including VMD, Command alarm, and Video loss
• VMD (Video Motion Detector) with 4 programmable detection areas
• Internet mode: H.264 images can be transmitted by over HTTP protocol.
• Multi-language GUI and setup menu: English, French, Italian, Spanish, German, Russian, Chinese, Japanese
• IPv4/IPv6 protocol supported

COMPONENT	SPECIFICATION
Video Input	4x 1.0 V [p-p] / 75 Ω NTSC composite video inputs (BNC) Multiplexed control data and cable compensation compatible: 1 ~ 4 CH 4x 1.0 V [p-p] / 75 Ω PAL composite video inputs (BNC) Multiplexed control data and cable compensation compatible: 1 ~ 4 CH
Microphone/Line Input	MIC IN and Line IN are selectable. ø3.5 mm stereo mini jack (monaural input) (Applicable microphone: Plug-in power type) Supply voltage: 2.5 V ±0.5 V Input impedance: approx. 2 kΩ
Audio Output	ø3.5 mm stereo mini jack (monaural output) Line level
Camera Control	Pan / tilt / zoom / focus / preset positions / auto focus (When using Panasonic P/T/Z cameras)
Display Mode	Spot, Quad: Image from 16 cameras can be displayed in 4 different Quad screens (JPEG only). 20 characters camera title available.
Unit Title	Up to 20 characters
Camera Title (OSD)	Up to 16 characters On/Off
Clock Display	Time: 12H/24H, Date: 5 formats on the browser, Summer time (Manual)
Alarm Control	Reset
One Shot Capture	A still picture will be displayed on a newly opened window.
Audio	Mic (Line) Input: ON / OFF Volume adjustment: Low / Middle / High, Audio Output: ON / OFF Volume adjustment: Low/Middle/High
SD Memory Data Download	Still or motion images recorded in the SD/SDHC memory card can be downloaded.
GUI/Setup Menu Language	English, French (Installation required for French) English, French, Italian, Spanish, German, Russian (Installation required except for English) (Installation required for French)
System Log	Up to 100 (Internal), Up to 4,000 (SD memory when the recording format is set to JPEG.) error logs
Supported OS	Microsoft® Windows® 8, Microsoft® Windows® 7, Microsoft® Windows Vista®, Microsoft® Windows® XP SP3
Supported Browser	Windows® Internet Explorer® 10.0(32 bit), Windows® Internet Explorer® 9.0(32 bit), Windows® Internet Explorer® 8.0(32 bit), Windows® Internet Explorer® 7.0(32 bit), Microsoft® Internet Explorer® 6.0 SP3
Network IF	10Base-T / 100Base-TX, RJ-45 connector
Image Resolution	VGA mode: VGA (640 x 480) / QVGA (320 x 240) D1 mode: D1 (720 x 480) VGA mode: VGA (640 x 480) / QVGA (320 x 240) D1 mode: D1 (720 x 576)
H.264/MPEG-4	[Transmission Mode] Constant bitrate / Framerate priority [Frame Rate] 1 / 3 / 5 / 7.5 / 10 / 15 / 20 / 30 fps 1 / 3.1 / 4.2 / 6.25 / 8.3 / 12.5 / 20 / 25 fps [Bit Rate/Client] 64 / 128 / 256 / 384 / 512 / 768 / 1,024 / 1,536 / 2,048 / 3,072 / 4,096 kbps / Unlimited [Image Quality] Low / Normal / Fine [Refresh Interval] 0.2 / 0.33 / 0.5 / 1 / 2 / 3 / 4 / 5 s [Transmission Type] UNICAST / MULTICAST
JPEG	[Image Quality] 10 steps [Refresh Interval] 0.1 fps ~ 30 fps (JPEG frame rate will be restricted when displaying both JPEG and H.264/MPEG-4 images.) 0.08 fps ~ 25 fps (JPEG frame rate will be restricted when displaying both JPEG and H.264/MPEG-4 images.) [Transmission Type] PULL / PUSH
Audio Compression	G.726 (ADPCM), 32 kbps / 16 kbps, CH1 only.
Audio Mode	OFF / Mic (Line) input / Audio output / Interactive (Half duplex) / Interactive (Full duplex)
Authentication for Audio	Level 1 only / Level 2 higher / All users
Total Bit Rate	64 / 128 / 256 / 384 / 512 / 768 / 1,024 / 2,048 / 4,096 / 8,192 kbps / Unlimited
Supported Protocol	IPv6: TCP/IP, UDP/IP, HTTP, RTP, FTP, SMTP, DNS, NTP, SNMP IPv4: TCP/IP, UDP/IP, HTTP, RTSP, RTP, RTP/RTCP, FTP, SMTP, DHCP, DNS, DDNS, NTP, SNMP
FTP Client	Periodic image transfer, Alarm image transfer (When the FTP transmission is failed, backup on an optional SDHC/SD memory card is available.)
No. of Simultaneous Users	Up to 14 users (Depends on network conditions)
SDHC/SD Memory Card (Option)	Alarm REC / Backup upon network failure / Manual REC (JPEG only) Compatible SD (SDHC) card: Panasonic 256 MB, 512 MB, 1 GB, 2 GB, 4 GB, 8 GB, 16 GB, 32 GB model * SDHC card
Alarm Source	3 terminal input, VMD, Command alarm, Camera site alarm, Video loss alarm
Alarm Action	SDHC/SD memory recording, E-mail notification, Alarm terminal output, Indication on browser, FTP image transfer, Panasonic protocol output
Alarm Log	With SDHC/SD memory card: 5,000 logs, without SDHC/SD memory card: 1,000 logs
Terminal	Terminal 1: Alarm input, Terminal 2: Alarm input/Alarm output, Terminal 3: Alarm input/Alarm output/AUX output
RS-485 Port	1x RS-485 (RJ-11, 4 wire / 2 wire, Full/Half duplex. Open command conversion table for other manufacturers' PTZ camera)
Safety/EMC Standard	UL (UL60065), FCC (Part15 ClassA), C-UL (CAN/CSA C22.2 No.60065), DOC (ICES003 ClassA) CE (EN55022, ClassB, EN55024)
Power Source and Power Consumption	12 V DC: 500 mA, PoE (IEEE802.3af): 6 W (Class 0 device)
Ambient Operating Temperature	–10 °C ~ +50 °C (14 °F ~ 122 °F)
Ambient Operating Humidity	90 % or less (without condensation)
Dimensions	140 mm (W) x 44 mm (H) x 185 mm (D) (5-1/2" x 1-3/4" x 7-9/32") (excluding rubber feet and projections)
Mass (Approx.)	1.0 kg (2.21 lbs.)