1. Home
  2. Surveillance
  3. Products
  4. TA-SP-A1SC15-VI



IP Horn Speaker Bundled with VI License/Only available in US

TOA IP Horn Speaker with VI License
Only available in US

  • VI license bundled
  • Max. SPL 124dB at 15 W powered with PoE+
  • Up to 20 sound sources can be pre-recorded
  • IP66
  • The IP Setting Tool allows you to assign IP addresses to all IP Horn Speakers
  • NDAA Compliant
  • 3D image

1. Single cabling for easy deployment
    PoE+ (IEEE802.3at Class 4) and PoE (IEEE802.3af Class 3) are supported.

2. Covering wider area for voice-down operation
    Max. SPL 124dB at 15 W powered with PoE+.

3. Installation improvement
    Up to 20 sound sources can be pre-recorded.


Amplifier Rated Output 15 W (at PoE+ powered), 8 W (at PoE powered)
Sensitivity 112 dB (1 W, 1 m) (500 Hz - 2.5 kHz, peak level)
Maximum Sound Pressure Level 124 dB (at PoE+ powered, 15 W, 1 m) (500 Hz - 2.5 kHz, peak level)
121 dB (at PoE powered, 8 W, 1 m) (500 Hz - 2.5 kHz, peak level)
Frequency Response 280 Hz - 12.5 kHz
Audio Codec PCMU (G.711u), PCMA (G.711a), G.722
Broadcasting Mode - SIP Broadcasting Mode: PCMU/PCMA/G.722
- Multicast Broadcasting Mode: PCMU/PCMA/G.722, Max.10 ports
- VMS Broadcasting Mode: Audio Backchannel, PCMU
- Internal Message Broadcasting Mode
Each broadcast mode can be assigned an order of priority using the Priority Setting function.
Internal Messages Max. 20 messages (Max. recording capacity: 80MB)
Supported file formats
- WAV file: 8/16/44.1/48 kHz sampling frequency, 8/16 bit, monaural/stereo
- MP3 file: 32/44.1/48 kHz sampling frequency, 64 - 320 kbps, CBR/VBR, monaural/stereo
Repeat count: 10 – 1 times, Interval time: 30 – 0 sec
Trigger: Control Input or Remote API (HTTP)
Network I/F 100BASE-TX, MDI/MDI-X, RJ-45
Network Protocol TCP/IP, UDP, HTTP, RTP, ARP, ICMP, RTSP, SIP (RFC3261)
Control Input 2 channels, no-voltage make contact inputs, open voltage: 5 V DC,
short-circuit current: 2 mA or less, removable terminal block (3 pins)
Control Output 1 channel, open collector output, withstand voltage: 30 V DC,
control current: 10 mA or less, removable terminal block (3 pins)
Indicator LAN LINK/ACT (green), STATUS (orange)


Safety CSA/UL (UL62368-1), CE, IEC 62368-1, AS/NZS 62368.1
EMC EN55032 Class A, EN 55035,
Power Source and Power Consumption PoE+ (IEEE802.3at Class 4), PoE (IEEE802.3af Class 3)
22 W (at PoE+ powered, rated output) 13 W (at PoE powered, rated output) 5 W (IEC62368-1)
Ambient Operating Temperature -22 °F to +131 °F (-30 °C to +55 °C)
Ambient Operating Humidity 90 % RH or less (no condensation)
Water and Dust Resistance IP66
Dimensions 8.74" x 8.31" x 10.87" (222 (W) x 211 (H) x 276 (D) mm)
Mass (approx.) 3.09 lbs. (1.4 kg)
Finish Horn flare/body: Aluminum, off-white (RAL 9010 equivalent), paint
Reflector horn: ABS resin, off-white (RAL 9010 equivalent)
Rear cover: PC resin, off-white (RAL 9010 equivalent), paint
Bracket, screws and bolts: Stainless steel


Standard Accessory Rear cover ···1, Removable terminal plug (3 pins) ···2
Optional Accessory Wall mount bracket: TA-201-WM
Pole mount brackets: TA-131-PM
Pole bands: TA-60B-PB


– Safety Precautions : Carefully read the Basic Information,Installation Guide and Operating Instructions before using this product.
– i-PRO Co., Ltd. cannot be held responsible for the performance of the network and/or other manufacturers' products used on the network.
– Masses and dimensions are approximate.
– Specifications are subject to change without notice.
Trademarks and registered trademarks
– iPad and iPhone are trademarks of Apple Inc., registered in the U.S.and other countries. – Android is a trademark of Google LLC.
– ONVIF is a trademark of ONVIF, Inc.
– All other trademarks identified herein are the property of their respective owners

©i-PRO Co., Ltd All rights reserved / November 2022