AI-VMD

Update on November 27, 2025
i-PRO Co., Ltd.

Download application: AI-VMD

Priority Rank Level:
🅰︎: Recommended to apply
🅱: When issue happened
🅲: Maintenance timing

Released Versions:
V4.10 | V4.00 | V3.81 | V3.80 | V3.71 | V3.70 or earlier

Release date: September 30, 2025

->Updated on November 27: Added an item written in red

Added [Detection Frame Notification] to [Detailed setting].
Improved malfunction when "Reference point for detecting objects" is located within the mask area.
Improved the display of detected speed in [Speed setting].
Support TCP alarm notifications from non-AI cameras with the AI Processing Relay application.
Improved the detection area setting screen.

Issue when using AI Processing Relay with this application:
- Corrected an issue where images from Camera 3 and 4 did not appear if the AI Processing app and the AI application for Camera 2 were not installed. 🅲
Corrected an issue where tailgating detection did not function for detection lines other than the first configured one. 🅲
Occurrence condition: When multiple detection lines are configured.

Release date: September 30, 2025

Support the updated camera OS in camera firmware V3.50.
*After upgrading the camera firmware to V3.50 or later, this extension software must also be updated to V4.00 or later.

Release date: August 8, 2025

Corrected an issue in the cross line counting feature where, on rare occasions, the application might fail to count even though detection frames were properly displayed. 🅲

Release date: May 30, 2025

Support speed settings for minimum speed condition.
Support speed settings for objects added by AI On-site Learning.
Support the function to detect tailgating when a specified number of people pass by within a specified period of time.[More details(*1)>>]
Support for a function that triggers an alarm when all specified objects are detected simultaneously within the same area.
Support changing the position of the white point that represents the coordinate position of the detected object.[More details(*2)>>]
Improved latitude / longitude sending function.
Improved AI On-site Learning integration function.
Improved the ONVIF connection.
Improved settings screen.
Enhanced security for sending CGI commands to the network camera.
*If you are using the [Image quality setting] - [Batch change to the appropriate setting] for network cameras with firmware released after May 2025, please upgrade this application to V3.80 (or later).

See more details of feature improvements *1*2

An alarm will be occurred when multiple objects are detected crossing the line within the set time.

Added ”Reference point for detecting objects" to the [Advanced setting] in the [Detailed setting].

Supported changing the position of the white point that represents the coordinate position of the detected object.

The default detection object coordinate position is at the center of the bottom edge of the detection frame.

The coordinate position that triggers the alarm can be flexibly changed according to the detection line and area.

Corrected a rare issue where detection might not function at certain positions when using PTZ cameras. 🅲
Occurrence condition:
- After repeatedly moving to preset positions.
- V2.40 or later
Corrected an issue where the detection of objects directly below the camera was occasionally missed in Perpendicular mode. 🅱
Occurrence condition: This issue occurred when the application was used with X-series AI cameras*
*Applicable models: WV-X15700-V2LN / X15600-V2LN / X15500-V3LN / X15300-V3LN / X15700-V2L / X15600-V2L / X15500-V3L / X15300-V3L / X25700-V2LN / X25600-V2LN / X25500-V3LN / X25300-V3LN / X22700-V2L / X22600-V2L / X22500-V3L / X22300-V3L
Corrected an issue where it was not possible to create a mask area starting from the top-left corner of the live window in the web browser. 🅲
Corrected an issue that could occasionally cause the application to restart unexpectedly when used with the AI Processing Relay application. 🅲
Occurrence condition: V3.70 or later
Corrected an issue where the alarm state would unexpectedly stop even when the alarm condition was still active. 🅲
Occurrence condition: When the alarm state continues for over 30 minutes.

Release date: January 15, 2025

Added AI-VMD On/Off setting. [More details(*1)>>]
Improved "Latitude / longitude sending settings" for the following contents.
- Support PTZ camera.
- Support High zoom bullet camera.
- Support loitering detection.
- Support automatic calculation of azimuth. [More details(*2)>>]
Support RTSP(H.264/H.265) connection for AI Processing Relay.
Support demo screen in JPEG one shot mode for AI Processing Relay.
Updated external interface specifications.
For details, refer to "AI-VMD External Interface Specification" on Extension software interface documentation page.
*Camera firmware to be released in January 2025 is required.
*To linkage to i-PRO Active Guard, i-PRO Active Guard Server Software V2.0.1 or later is required.

See more details of feature improvements *1*2

Added "Latitude/Longitude of center of angle of view" settings, and supported automatic calculation of azimuth.

How to automatic calculation of azimuth

Set for camera latitude/longitude.
Set for center of viewing angle latitude/longitude.
If you check "Automatic azimuth calculation", azimuth will be calculated automatically.

Corrected an issue where this application might restart and the images appeared broken on Video Management System, on rare occasion. 🅲
Occurrence condition: When used with a multi-directional camera.
Corrected an issue where the setting window did not open. 🅲
Occurrence condition: When using version 3.70 of this application in 2.36 or earlier version of a camera.
Corrected issues when this application is used with AI Processing Relay app:
- Detections and alarm notifications of non-AI camera stopped after auto focus is performed on an AI camera. 🅲
- This application might restart after a cross line counting is configured. 🅲