Why is the destination address of TCP alarm notification on camera changed unknowingly after I register the camera on NVR (NX series)?
- Network Recorders
- Installation/Configuration
When you register the camera on NVR (NX series), NVR automatically set the destination address on the camera to the NVR address. If you configure the destination on the camera before you register it on NVR, the destination address will be overwritten.
Follow the steps below to set up.
1. Register the camera on NVR (NX series)
2. Configure the destination address of the [Notification] tab on the camera
Article number：en122656
Last updated：October 16, 2025
Was this article helpful?
Thank you for your feedback!