1. Home
  2. Surveillance
  3. FAQ & Technical Library
  4. How do I enable "Browser Access" on the camera?

How do I enable "Browser Access" on the camera?

  • Network Cameras
  • Browser/OS support
  • Installation/Configuration

Problem Description

The camera screen is not accessible, so please activate it in the following way

  • Send the CGI command to activate
  • Initialize the camera

 

  1. Send the CGI command to activate
    http://(IP address)/cgi-bin/setdata?LIVE_ACCESS=1

  2. Initialize the camera
    Press the INITIAL SET button to initialize the main unit. See below for the position of the INITIAL SET button.
    (1) Disconnect the Ethernet cable from the computer and turn off the computer.
    (2) Turn on the computer while pressing the [INITIAL SET] button.
    (3) [INITIAL SET] button holds pressing for 15 seconds or more after power is turned on
    (4) Release the [INITIAL SET] button

 

 

Article number：en121196

Last updated：October 20, 2025

Was this article helpful?

Thank you for your feedback!