WV-SPN631 i-PRO
Fixed Box network camera
DISCONTINUED PRODUCT
Super Dynamic 2MP (1080p) Network Camera
Successor model : WV-S1131
CARACTÉRISTIQUE CLÉ
CARACTÉRISTIQUES
BASE DE DONNÉES DOCUMENTAIRES
PRODUITS CONNEXES
• 2MP (1080p) images up to 60 fps*1
• Super high resolution at Full HD/1,920 x 1,080 created by high sensitivity MOS Sensor.
• Multiple H.264 (High profile) streams (max. 4 streams) and JPEG streams ensure simultaneous real time monitoring and high resolution recording.
• Maximum Screen Size is 2,048 x 1,536* @30fps, H.264 * Used by super resolution technology
• Enhanced Super Dynamic*1 and ABS (Adaptive Black Stretch) technologies deliver 133 dB wider dynamic range compared to conventional cameras.
• Multi process NR & 3D-DNR ensures noise reduction in various conditions.
• High sensitivity with Day & Night (IR) function: 0.04 lx (Color), 0.01 lx (B/W) at F1.4
• IR LED equipped: The equipped infrared LED makes it possible to take pictures at zero lx.(Extension Unit)
• IR LED is controlled to match the environment, thereby the camera provides clear images of human faces without white blur.(Extension Unit)
• High Speed ABF (Auto Back Focus) ensures easy installation.
• Face Super Dynamic technology ensures clear face image.
• Double SDXC/SDHC/SD Memory card slots for manual recording (H.264 / JPEG), alarm recording (H.264 / JPEG) and backup upon network failure (H.264 / JPEG). Realize long-term recording and auto backup function.
• Face detection function detects the position of human face and the information is sent by XML or video stream.(Extension Software)
• Can be added new intelligent extension software (Optional) in addition to built-in VMD (Video Motion Detection), alarm function.
• Fog compensation function equipped as standard.
• Super Chroma Compensation function realizes a better color reproducibility even in low illumination.
• Supports SSL, DDNS (viewnetcam, RFC2136)
• Supports Extension Units : Hardware functions can be added by mounting an Extension Unit (IR-LED Unit, RS-485 Output unit) to the front or rear sides of the camera.
• HLC (High Light Compensation):
If a bright light source such as car headlights points in the driection of a camera, the camera corrects for strong lights and their surroundings to provide clear images of the areas.
*1 Super Dynamic function is automatically set off on 60 fps mode
Camera
COMPONENT | SPECIFICATION |
---|---|
Image Sensor | Approx. 1/3 type MOS image sensor |
Scanning Mode | Progressive scan |
Scanning Area | 5.28 mm (H) x 3.30 mm (V) {7/32 inches(H) x 1/8 inches(V) } |
Minimum Illumination | Color : 0.04 lx, BW: 0.01 lx (F1.4, Maximum shutter : Max. 1/30s, Gain : On(High)) Color : 0.003 lx, BW: 0.0007 lx (F1.4, Maximum shutter : Max. 16/30s, Gain : On(High)) |
White Balance | AWC (2,000 - 10,000 K), ATW1 (2,700 - 6,000 K), ATW2 (2,000 - 6,000 K) |
Light Control Mode | Outdoor scene : Automatic integration of ALC and ELC / Indoor scene [50 Hz] : Automatic integration of ALC and ELC with ickerless / Indoor scene [60 Hz] : Automatic integration of ALC and ELC with ickerless / ELC/Fix shutter |
Shutter Speed | 2 mega pixel [16 : 9](60 fps mode)/ 1.3 mega pixel [16 : 9](60 fps mode)] Off(1/60), 1/100, 1/120, 1/250, 1/500, 1/1000, 1/2000, 1/4000,1/10000 Other than [2 mega pixel [16 : 9](60 fps mode)/ 1.3 mega pixel [16 : 9](60 fps mode)] Off(1/30), 3/100, 3/120, 2/100, 2/120, 1/100, 1/120, 1/250,1/500, 1/1000, 1/2000, 1/4000, 1/10000 |
Super Dynamic | On (High) / On (Normal) / Off |
Face Super Dynamic | On / Off (only when Super Dynamic : On) |
Adaptive Black Stretch | On / Off (only when Super Dynamic : Off) |
Fog compensation | On / Off (only when Super Dynamic / Adaptive black stretch : Off) |
High light compensation(HLC) | On / Off (only when Super Dynamic / Back light compensation : Off) |
AGC | On (Low) / On (Mid) / On (High) / Off |
Maximum shutter | max. 1/1000 s, max. 1/500 s, max. 1/250 s, max. 1/120 s, max. 2/120 s, max. 1/100 s, max. 2/100 s, max. 1/60 s, max. 1/30 s, max. 2/30 s, max. 4/30 s, max. 6/30 s, max. 10/30 s, max. 16/30 s |
Day/Night (ICR) | Off / On / Auto1 (Normal) / Auto2 (IR Light) / Auto3 (SCC) |
Dynamic Range | 133 dB typ. (Super Dynamic : On) |
Digital Noise Reduction | High / Low |
Video Motion Detection | On / Off, 4 areas, Sensitivity : 15 steps, Detection size : 10 steps |
Privacy Zone | On / Off (up to 8 zones available) |
VIQS | On / Off (up to 8 zones available) |
Camera Title (OSD) | On / Off, Up to 20 characters (alphanumeric characters, marks) |
Focus Adjustment | Auto back focus / Focus / Adjusting method |
Browser GUI
COMPONENT | SPECIFICATION |
---|---|
Cropping | Off / JPEG(1) / JPEG(2) / JPEG(3) / H.264(1) / H.264(2) / H.264(3) / H.264(4) / H.264(all) Up to 4 image capture areas can be specied |
Camera Control | Brightness, AUX On / Off |
Display Mode | Spot, Quad : Image from 16 cameras can be displayed in 4 different Quad screens or 16 split screen (JPEG only). 20 characters camera title available. |
Digital Zoom | 1x, 2x, 4x controlled by browser GUI |
Camera Title | Up to 20 alphanumeric characters |
Clock Display | Time : 12H/24H, Date : 5 formats on the browser, Summer time (Manual) |
Alarm Control | Reset |
One Shot Capture | A still picture will be displayed on a newly opened window. |
Audio | Mic (Line) Input: ON / OFF Volume adjustment: Low / Middle / High, Audio Output: ON / OFF Volume adjustment: Low / Middle / High |
SD Memory Data Download | Still or motion Images recorded in the SDHC/SD memory card can be downloaded. |
GUI / Setup Menu Language | English, Italian, French, German, Spanish, Portuguese, Russian, Chinese, Japanese |
System Log | Up to 100 (Internal) Up to 4,000 (SDXC/SDHC/SD memory when the recording format is set to JPEG.) error logs |
Supported OS | Microsoft® Windows® 8.1, Microsoft® Windows® 8, Microsoft® Windows® 7, Microsoft® Windows Vista® |
Supported Browser | Windows® Internet Explorer® 11 (32-bit) Windows® Internet Explorer® 10 (32-bit) Windows® Internet Explorer® 9 (32-bit) Windows® Internet Explorer® 8 (32-bit) Windows® Internet Explorer® 7 (32-bit) |
Network
COMPONENT | SPECIFICATION |
---|---|
Network IF | 10Base-T / 100Base-TX, RJ45 connector |
Image Resolution | •2 mega pixel [16 : 9] (30/60 fps) 1,920 x 1,080 / 1,280 x 720 / 640 x 360 / 320 x 180 / 160 x 90 •2 mega pixel [4 : 3] (30 fps) 1,600 x 1,200 / 1,280 x 960 / 800 x 600 / 640 x 480 / 400 x 300 / 320 x 240 / 160 x 120 •3 mega pixel [4 : 3] (30 fps) 2,048 x 1,536* / 1,280 x 960 / 800 x 600 / 640 x 480 / 400 x 300 / 320 x 240 / 160 x 120 *Used by super resolution techniques |
H.264 | [Transmission Mode] Constant bit rate / Variable bit rate / Framerate priority / Best effort / Advanced VBR [Frame Rate] 1 / 3 / 5 / 7.5 / 10 / 12 / 15 / 20 / 30 / 60 fps [Bit Rate/Client] 64 / 128 / 256 / 384 / 512 / 768 / 1,024 / 1,536 / 2,048 / 3,072 / 4,096 / 6,144 / 8,192 / 10,240 / 12,288 / 14,336 / 16,384 / 20,480 / 24,576 / 30,720 / 40,960 kbps [Image Quality] Constant bit rate, Best effort : Low (Motion priority) / Normal / Fine (Image quality priority) VBR : 0 Super ne / 1 Fine / 2 / 3 / 4 / 5 Normal / 6 / 7 / 8 / 9 Low [Smart Coding mode] On (Low / Mid / High) / Off (Only when "Variable bit rate" is selected) [Refresh Interval] 0.2 / 0.25 / 0.33 / 0.5 / 1 / 2 / 3 / 4 / 5s [Transmission Type] UNICAST / MULTICAST |
JPEG | [Image Quality] 10 steps [Refresh Intervaly] 0.1 fps - 30 fps (JPEG frame rate will be restricted when displaying both JPEG and H.264 images.) [Transmission Type] PULL / PUSH |
Audio Compression | G.726 (ADPCM) 32 kbps / 16 kbps, G.711 64 kbps / AAC-LC |
Audio Mode | Off / Mic (Line) input / Audio output / Interactive (Half duplex) / Interactive (Full duplex) |
Authentication for Audio | Level 1 only / Level 2 higher / All users |
Bandwidth control | 64 / 128 / 256 / 384 / 512 / 768 / 1,024 / 2,048 / 4,096 / 8,192 kbps / Unlimited |
Supported Protocol | IPv6 : TCP/IP, UDP/IP, HTTP, HTTPS, RTP, FTP, SMTP, DNS, NTP, SNMP, DHCPv6, MLD, ICMP, ARP, DiffServ IPv4 : TCP/IP, UDP/IP, HTTP, HTTPS, RTSP, RTP, RTP/RTCP,FTP, SMTP, DHCP, DNS, DDNS, NTP, SNMP, UPnP, IGMP, ICMP, ARP, DiffServ |
FTP Client | Alarm image transmission, FTP periodic transmission (When the FTP transmission is failed, backup on an optional SDXC/SDHC/SD memory card is available.) |
No. of Simultaneous Users | Up to 14 users (Depends on network conditions) |
SDXC/SDHC/SD Memory Card (Option) * Manufactured by Panasonic (SD speed class 4 or higher) * Use the SD memory card that complies with UHS-1 (Ultra High Speed-1) in the case of SD Speed Class 10 | H.264 recording : Manual REC / Alarm REC (Pre/Post) / Schedule REC / Backup upon network failure JPEG recording : Manual REC / Alarm REC (Pre/Post) / Backup upon network failure Compatible SD (SDHC/SDXC) card: Panasonic 2 GB, 4 GB*, 8 GB*, 16 GB*, 32 GB*, 64 GB** model *SDHC card, ** SDXC card (except miniSD card and microSD card) |
Employment of two SD cards | Dual Recording for Redundancy, Series Recording for long time |
Cellular Phone Compatibility | JPEG image, AUX control (by access level) |
Mobile Terminal Compatibility | iPad, iPhone, iPod touch (iOS 4.2.1 or later), AndroidTM mobile terminals |
Alarm
COMPONENT | SPECIFICATION |
---|---|
Alarm Source | 3 terminals input, VMD, Command alarm, Audio detection alarm |
Alarm Actions | SDXC/SDHC/SD memory recording, E-mail notication, HTTP alarm notication Indication on browser, FTP image transfer, Panasonic protocol output |
Alarm Log | With SDXC/SDHC/SD memory card : Up to 50,000 logs for each SD memory card |
Schedule
COMPONENT | SPECIFICATION |
---|---|
Schedule mode | Alarm permission / VMD permission / Access permission / H.264 recording / Audio detection permission / Scene le / FTP periodic image transmission |
Input/Output
COMPONENT | SPECIFICATION |
---|---|
Monitor Output (for Adjustment) | VBS: 1.0 V [p-p]/75 Ω, composite, RCA jack An NTSC or PAL signal can be outputted from camera. |
Microphone Input | ø3.5 mm monaural mini jack Input impedance: Approx. 2 kΩ (unbalanced) Recommended applicable microphone: Plug-in power type Supply voltage: 2.5 V ±0.5 V Recommended sensitivity of microphone: -48 dB±3 dB (0 dB=1 V/Pa, 1 kHz) |
Line Input | Input level : Approx. –10 dBV |
Audio Output | ø3.5 mm stereo mini jack (monaural output) Output impedance: Approx. 600 Ω (unbalanced) |
External I/O Terminals | ALARM IN 1 (DAY/NIGHT IN), ALARM IN 2 (ALARM OUT), ALARM IN 3 (AUX OUT) |
General
COMPONENT | SPECIFICATION |
---|---|
Safety | UL (UL60950-1), C-UL (CAN/CSA C22.2 No.60950-1), CE, IEC60950-1 |
EMS | FCC (Part15 ClassA), ICES-003 ClassA, EN 55032 ClassB, EN55024 |
Power Source and Power Consumption | (excluding Extension Units) DC12 V : 430 mA/Approx. 5.1 W PoE (IEEE802.3af compliant) DC48 V : 130 mA/Approx. 6 W (Class 0 device) (including Extension Units) DC12 V : 850 mA/Approx. 10.2 W PoE (IEEE802.3af compliant) DC48 V : 250 mA/Approx. 11.7 W (Class 0 device) * ONLY CONNECT DC12 V CLASS 2 POWER SUPPLY. |
Ambient Operating Temperature | -10°C to +50°C (14 °F to 122 °F) |
Ambient Operating Humidity | 10 to 90 % (no condensation) |
Dimensions | 75.0 mm (W) x 57.0 mm (H) x 143.5 mm (D) {2-15/16 inches (W) x 2-1/4 inches (H) x 5-21/32 inches (D)} (excluding lens/ power cord plug) |
Mass (approx.) | Approx. 400 g {0.88 lbs} excluding lens |
Finish | Main body : PC/ABS resin (Sail white) |
Caractéristiques
Data Sheet
WV-SPN631, SPN611 Spec Sheet (US)
Letter Size
A&E Spec Sheet
Manuals
Installation Guide
WV-SFV6, SFR6, SFN6, SPN6 Series Caution
- Cautions for using the IR LED
- Cautions for mounting the enclosure
WV-SFV6, SFR6, SFN6, SPN6 Series Caution (Chinese)
- Cautions for using the IR LED
- Cautions for mounting the enclosure
User Manual/Operating Instruction
Firmware/Software
Firmware
NTSC/PAL
- In case of firmware updating from 1.xx(or earlier) to 2.xx(or later), you have to upgrade version 9.99 once, then upgrade 2.xx (or later).
Please click here to request the firmware version 9.99 as providing the firmware is on request only; complete the form with the model number of your camera and "Request firmware version 9.99", then click "Submit" button.
Please clear the cache memory or access with another internet browser if you cannot access the form.
How to upgrade firmware version 2.xx (or later) in 2 steps.
(Click here for detail)
- Important information about backing up/restoring the settings data of camera firmware ver 1.71 or older (Click here for detail)
WV-SPN631, SPN611 Firmware (Chinese)
Chinese
- In case of firmware updating from 1.xx(or earlier) to 2.xx(or later), you have to upgrade version 9.99 once, then upgrade 2.xx (or later).
Please click here to request the firmware version 9.99 as providing the firmware is on request only; complete the form with the model number of your camera and "Request firmware version 9.99", then click "Submit" button.
Please clear the cache memory or access with another internet browser if you cannot access the form.
How to upgrade firmware version 2.xx (or later) in 2 steps.
(Click here for detail)
- Important information about backing up/restoring the settings data of camera firmware ver 1.71 or older (Click here for detail)
Release Note
Image/CAD/BIM
Image Data
WV-SPN631 Product Image 3 (png)
CAD Data
BIM Data
Other
Technical Document
How to firmware two-stage version up
How to upgrade firmware version 2.00 (or newer) in 2 steps and/or version 4.10 (or newer).
WV-SFV631L, SFV611L etc. How to Upgrade (Ver1.71 or older)
WV-SW397, SFN311 etc. Addendum
WV-SW397, SFN311 etc. Addendum (Chinese)
WV-SW598, WV-SFN310 etc. Addendum
WV-SW598, WV-SFN310 etc. Addendum (Chinese)