Advidia M-26-FW advidia
2MP DWDR IR Fixed Dome Network Camera
Only available in APAC
- 2MP (1920*1080)
- WDR52dB
- 2.8mmLens
- H.265
- IR, IP67, IK10 Rated
2MP DWDR IR Fixed Dome Network Camera
Device
| COMPONENT | SPECIFICATION |
|---|---|
| Image Sensor | 1 / 2.8" Progressive Scan CMOS |
| Min Illumination | Color: 0.01Lux (F2.0, AGC ON) | 0Lux with IR |
| Shutter Time | Auto/Manual, 1 ~ 1/100000s |
| Lens | 2.8mm@F2.0 |
| WDR | 52 dB |
| Angle of View | H: 106.7°, V: 57.1° |
| Angle Adjustment | Pan: 3° ~ 360° | Tilt: 0° ~ 75° | |
| Day & Night | IR-Cut Filter with Auto Switch (ICR) |
| IR Range | Up to 30m (98ft) IR range |
Compression Standard
| COMPONENT | SPECIFICATION |
|---|---|
| Video Compression | H.265, H.264 |
| Video Bit Rate | 128 Kbps ~ 6 Mbps |
| Two Stream | Yes |
| Analytics | Motion Detection |
Image
| COMPONENT | SPECIFICATION |
|---|---|
| Max. Image Resolution | 1920 x 1080 |
| Frame Rate | 30fps (1920 x 1080) |
| ROI Codec | Up to 8 areas |
| Image Setting | White Balance, Digital Noise Reduction, Smart IR, Flip, HLC, BLC |
Network
| COMPONENT | SPECIFICATION |
|---|---|
| Protocols | IPv4, IGMP, ICMP, ARP, TCP, UDP, DHCP, RTP, RTSP, RTCP, RTMP, DNS, DDNS, NTP, UPnP, HTTP |
Interface
| COMPONENT | SPECIFICATION |
|---|---|
| Communication Interface | 10M/100M Base-TX Ethernet |
General
| COMPONENT | SPECIFICATION |
|---|---|
| Safety | CE, IEC62368-1 |
| EMC | FCC Part 15, EN 55032:2015+A11:2020, EN 55035: 2017+A11:2020, |
| Operating Conditions | Temperature: -30°C~60°C(-22°F~140°F), Humidity:≤95%RH(Non-Condensing) |
| Power Consumption | Max 5.0 W |
| Power Supply | DC 12V±25%, PoE (IEEE 802.3af) |
| Weather Proof Rating | IP67 |
| Vandal Resistant | IK10 |
| Dimensions | Φ109 x 81mm (Ø4.3” x 3.2”) |
| Net Weight | 0.35kg (0.77lb) |
| Software | No license required for use with Video Insight Software |
Specifications
Firmware/Software
Image/CAD/BIM
