1. Home
  2. WV-SPV781L

Cámaras tipo bullet/box

WV-SPV781L i-PRO

Bullet Network camera

DISCONTINUED PRODUCT

4K Vandal Resistant Weatherproof Network Camera

  • 4K (3,840 x 2,160) images up to 30 fps, 12M pixel (4,000 x 3,000) images up to 15 fps
  • Ultrawide x6 zoom lens with the newly developed 3-drive lens system
  • High sensitivity with Day/Night (ICR) function:
  • 0.3 lx (Color), 0.04 lx (B/W) at F1.6
  • Smart IR LED equipped

Successor model : WV-X1571LN

 Smart DoF (Depth of Field): Automatically optimizes DoF to enhance focus both for near and far objects within camera view.
• Digital Noise Reduction: 3D-DNR ensures noise reduction in various conditions.
, thereby the camera provides clear images of human faces without white blur.
• ABF (Auto Back Focus) ensures easy installation.
• Fog compensation function equipped as standard.
• SDXC/SDHC/SD Memory card slot for manual recording (H.264 / JPEG), alarm recording (H.264 / JPEG) and backup upon network failure (H.264 / JPEG). Realize long-term recording and auto backup function.
• HLC (High Light Compensation) technology reduces strong light sources such as vehicle headlights to prevent camera being blinded.
• SCC (Super Chroma Compensation) function realizes a better color reproducibility even in low illumination.
• Supports SSL, DDNS (viewnetcam, RFC2136)
• IP66 rated water and dust resistant. Compatible with IEC60529 measurement standard, Type 4X(UL50), NEMA 4X compliant.
• Dehumidification device for use with various weather conditions
• Vandal resistant mechanism for high reliability (IK10)
• Rain wash coating lens cover

Camera

COMPONENT SPECIFICATION
Image Sensor 1/1.7 type MOS image sensor
Scanning Mode Progressive scan
Minimum Illumination Color : 0.3 lx, BW : 0.04 lx,
BW(with IR LED) : 0 lx (F1.6, Maximum shutter : Off (1/30s), Gain : High),
Color : 0.02 lx, BW 0.003 lx (F1.6, Maximum shutter : Max. 16/30s, AGC : High)
IR LED Light Off / Auto (High / Mid / Low)
IR LED irradiation distance Approx. 30 m {98.43 feet} at IR LED: Auto (High)
White Balance ATW1 (2,700 - 6,000 K) /ATW2 (2,000 - 6,000 K) /AWC (2,000 - 10,000 K)
Light Control Mode Outdoor scene/ Indoor scene (50 Hz)/ Indoor scene (60 Hz)/ Fix shutter
Maximum shutter max. 1/1000 s, max. 1/500 s, max. 1/250 s, max. 1/120 s, max. 1/100 s,
max. 2/120 s, max. 2/100 s, max. 1/30 s, max. 2/30 s, max. 4/30 s,
max. 6/30 s, max. 10/30 s, max. 16/30 s
Shutter Speed Off(1/30), 3/100, 3/120, 2/100, 2/120, 1/100, 1/120, 1/250,
1/500, 1/1000, 1/2000, 1/4000, 1/10000
Wide Dynamic Range On / Off
Adaptive Black Stretch On / Off (only when Wide dynamic range)
Fog Compensation On / Off (only when Wide dynamic range/ Adaptive black stretch: Off)
High light compensation(HLC) On / Off (only when Wide Dynamic Range / Back light compensation (BLC) : Off)
Gain (AGC) On (High) / On (Mid) / On (Low) / Off
Day/Night (ICR) Off / On / Auto1 (Normal) / Auto2 (IR Light) / Auto3 (SCC)
Digital Noise Reduction High / Low
Video Motion Detection (VMD) On / Off, 4 areas available
Privacy Zone On / Off (up to 8 zones available)
VIQS On / Off (Max. 8 locations)
Camera Title (OSD) On/ Off Up to 20 characters (alphanumeric characters, marks)
Focus Adjustment ABF / MANUAL (Html only)

Lens

COMPONENT SPECIFICATION
Vari Focal Length 4.2 mm - 25.2 mm {5/32 inches – 1 inch}
Angular Field of View [16 : 9 mode] Horizontal : 17 ° (TELE) - 97 ° (WIDE)
Vertical : 9.4 ° (TELE) - 55 ° (WIDE)
[4 : 3 mode] Horizontal : 18 ° (TELE) - 101 ° (WIDE)
Vertical : 13 ° (TELE) - 76 ° (WIDE)
Maximum Aperture Ratio 1 : 1.6 (WIDE) - 1 : 3.3 (TELE)
Focusing Range 1.0 m - ∞

Browser GUI

COMPONENT SPECIFICATION
Cropping H.264(1) Ch1 - Ch4
Up to 4 image capture areas can be specied.
*only when Image capture mode : Cropping [16:9] (30fps mode)
Camera Control Brightness, AUX On / Off
Display Mode Spot, Quad: Image from 16 cameras can be displayed in
4 different Quad screens or 16 split screen (JPEG only).
20 characters camera title available.
Digital Zoom 1x, 2x, 4x controlled by browser GUI
Camera Title Up to 20 alphanumeric characters
Clock Display Time: 12H/24H, Date: 5 formats on the browser, Summer time (Manual)
Alarm Control Reset
One Shot Capture A still picture will be displayed on a newly opened window.
Audio Mic (Line) Input : On / Off Volume adjustment : Low / Middle / High
Audio Output : On / Off Volume adjustment : Low / Middle / High
SD Memory Data Download Still or motion Images recorded in the SDXC/SDHC/SD
memory card can be downloaded.
GUI / Setup Menu Language English, Italian, French, German, Spanish, Portuguese, Russian,
Chinese, Japanese
System Log Up to 100 (Internal), Up to 4,000 (SDXC/SDHC/SD memory) error logs
Supported OS Microsoft® Windows® 8.1, Microsoft® Windows® 8,
Microsoft® Windows® 7, Microsoft® Windows Vista®
Supported Browser Windows® Internet Explorer® 11 (32 bit),
Windows® Internet Explorer® 10 (32 bit),
Windows® Internet Explorer® 9 (32 bit),
Windows® Internet Explorer® 8 (32 bit),
Windows® Internet Explorer® 7 (32 bit)

Network

COMPONENT SPECIFICATION
Network IF 10Base-T / 100Base-TX, RJ45 connector
Image Resolution •8 mega pixel [16 : 9] (30 fps mode)*
H.264(1): 3,840 x 2,160, up to 30 fps
JPEG(2): 640 x 360
* "H.264(2)" and "JPEG(1)" can not be selected.
•8 mega pixel [16 : 9] (15 fps mode)
H.264(1): 3,840 x 2,160, up to 15 fps
H.264(2): 1,920 x 1,080 / 1,280 x 720 / 640 x 360 / 320 x 180, up to 30 fps
JPEG(1): Enables the setting of the resolution in the same way as
for H.264 (1), H.264 (2), or JPEG (2).
JPEG(2): 640 x 360
•12 mega pixel [4 : 3] (15 fps mode)
H.264(1): 4,000 x 3,000, up to 15 fps
H.264(2): 640 x 480 / 320 x 240, up to 5 fps
JPEG(1): Enables the setting of the resolution in the same way as
for H.264 (1), H.264 (2), or JPEG (2).
JPEG(2): 640 x 480
•5 mega pixel [4 : 3] (30 fps mode)
H.264(1): 2,560 x 1,920 / 2,048 x 1,536 / 1,600 x 1,200 /
1,280 x 960 / 800 x 600, up to 30 fps
H.264(2): 1,280 x 960 / 800 x 600 / 640 x 480 / 320 x 240, up to 30 fps
JPEG(1): Enables the setting of the resolution in the same way as
for H.264 (1), H.264 (2), or JPEG (2).
JPEG(2): 640 x 480
•4 mega pixel [16 : 9] (30 fps mode)*
H.264(1): 2,560 x 1,440 / 1,920 x 1,080 / 1,280 x 720, up to 30 fps
H.264(2): 1,920 x 1,080 / 1,280 x 720 / 640 x 360 / 320 x 180, up to 30 fps
H.264(3): 1,280 x 720 / 640 x 360 / 320 x 180, up to 30 fps
H.264(4): 640 x 360, up to 30 fps
JPEG(2): 640 x 360
* "JPEG(1)" can not be selected.
•Cropping [16 : 9] (30 fps mode)
H.264(1): Ch1 1,280 x 720 / 640 x 360, up to 30 fps Cropping
H.264(1): Ch2 1,280 x 720 / 640 x 360, up to 30 fps Cropping
H.264(1): Ch3 1,280 x 720 / 640 x 360, up to 30 fps Cropping
H.264(1): Ch4 1,280 x 720 / 640 x 360, up to 30 fps Cropping
H.264(2): 1,920 x 1,080 / 1,280 x 720 / 640 x 360 /320 x 180, up to 30 fps
JPEG(1): Enables the setting of the resolution in the same way as
for H.264 (2) or JPEG (2).
JPEG(2): 640 x 360
H.264 [Transmission priority]
Constant bit rate / Variable bit rate / Frame rate /
Best effort / Advanced VBR

[Frame Rate]
<When Variable bit rate, Frame rate, or Advanced VBR is selected>

1 / 3 / 5* / 7.5* / 10* / 12* / 15* / 20* / 30* fps
* The frame rate is limited to "bit rate".
When a value with an asterisk (*) is selected, the actual frame
rate may be lower than the value selected.

[Bit Rate/Client]
64 / 128 / 256 / 384 / 512 / 768 / 1,024 / 1,536 / 2,048 / 3,072 /
4,096 / 6,144 / 8,192 / 10,240 / 12,288 / 14,336 / 16,384 /
20,480 / 24,576 / 30,720 / 40,960 kbps
* The available range of the H.264 bit rate varies depending on
the setting selected for “image capture size”.

[Image Quality]
<When Constant bit rate or Best effort is selected>
Low / Normal / Fine
<When Variable bit rate is selected>
0 Super Fine / 1 Fine / 2 / 3 / 4 / 5 Normal / 6 / 7 / 8 / 9 Low

[Refresh Interval]
0.2 / 0.25 / 0.33 / 0.5 / 1 / 2 / 3 / 4 / 5 s

[Transmission Type]
Unicast / Multicast
JPEG Image Quality
10 steps

Refresh Interval
0.1 fps - 30 fps
(JPEG frame rate will be restricted when displaying both JPEG and H.264 images.)

Transmission Type
Pull / Push
Audio Compression G.726 (ADPCM) 32 kbps / 16 kbps, G.711 64 kbps / AAC-LC*4
64 kbps / 96 kbps / 128 kbps
Audio Transmission Mode Off / Mic (Line) input / Audio output / Interactive (Half duplex) /
Interactive (Full duplex)
Authentication for Audio Level 1 only / Level 2 higher / All users
Supported Protocol IPv6: TCP/IP, UDP/IP, HTTP, HTTPS, FTP, SMTP, DNS,
NTP, SNMP, DHCPv6, RTP, MLD, ICMP, ARP
IPv4: TCP/IP, UDP/IP, HTTP, HTTPS, RTSP, RTP, RTP/RTCP,
FTP, SMTP, DHCP, DNS, DDNS, NTP, SNMP, UPnP,
IGMP, ICMP, ARP
FTP Client Alarm image transmission, FTP periodic transmission
(When the FTP transmission is failed, backup on an optional
SDXC/SDHC/SD memory card is available.)
Maximum concurrent access number Up to 14 users (Depends on network conditions)
SDXC/SDHC/SD Memory Card (Option) * Use the SD memory card manufactured by Panasonic (SD speed class 4 orhigher), and in the case of SD Speed Class 10, that complies with UHS-1(Ultra High Speed-1). H.264 recording: Manual REC / Alarm REC (Pre/Post) /
Schedule REC / Backup upon network failure
JPEG recording: Manual REC / Alarm REC (Pre/Post) / FTP error /
Backup upon network failure
Compatible SD (SDHC/SDXC) card: Panasonic 2 GB, 4 GB*, 8 GB*,
16 GB*, 32 GB*, 64 GB** model
*SDHC card, ** SDXC card (except miniSD card and microSD card)
Cellular Phone Compatibility JPEG image, AUX control (by access level)
Mobile Terminal Compatibility iPad, iPhone, iPod touch (iOS 4.2.1 or later), AndroidTM mobile terminals
ONVIF Profile G / T

Alarm

COMPONENT SPECIFICATION
Alarm Source 3 terminals input, VMD, Command alarm
Alarm Actions SDXC/SDHC/SD memory recording, E-mail notication,
Indication on browser, FTP image transfer, Panasonic protocol output
Alarm Log With SDXC/SDHC/SD memory card: 50,000 logs
Schedule Alarm / VMD / Access permission / H.264 recording / Scene le /
FTP periodic image transmission

Input/Output

COMPONENT SPECIFICATION
Monitor Output (for Adjustment) VBS: 1.0 V [p-p] / 75 Ω, NTSC / PAL composite,
RCA jack
Microphone/Line Input ø3.5 mm stereo mini jack Input impedance: Approx. 2 kΩ (unbalanced)

For microphone input : Recommended applicable microphone: Plug-in power type
Supply voltage: 2.5 V ±0.5 V
Recommended sensitivity of microphone:
–48 dB±3 dB (0 dB=1 V/Pa, 1 kHz)

For line input : Input level: Approx. –10 dBV
Audio Output ø3.5 mm stereo mini jack
Output impedance: Approx. 600 Ω (unbalanced) / Output level: –20 dBV
Can be used as the monitor output by switching the audio/monitor output plug.
External I/O Terminals (Cable) ALARM IN1 (DAY/NIGHT IN), ALARM IN2 (ALARM OUT),
ALARM IN3 (AUX OUT, DAY/NIGHT OUT)

General

COMPONENT SPECIFICATION
Safety UL (UL60950-1, UL60950-22), C-UL (CAN/CSA C22.2 No.60950-1), CE, IEC60950-1
EMC FCC (Part15 ClassA), ICES003 ClassA, EN55023 ClassB,
EN55022 ClassB, EN55024
Power Source and Power Consumption DC12 V : 1050 mA / Approx. 12.6 W
PoE (IEEE802.3af compliant) /
PoE DC48 V : 265 mA / Approx. 12.95 W (Class 0 device)
Ambient Operating Temperature –45 °C to +50 °C {–49 °F to 122 °F}
Ambient Operating Humidity 10 to 90 % (no condensation)
Impact Protection Compliant with IK10 (IEC 62262)
Water and Dust Resistance Main body: IP66 (IEC60529), Type 4X (UL50), NEMA 4X compliant
Dimensions When directly mounting the camera to a ceiling or wall
131 mm {5-5/32 inches} (W), 130 mm {5-1/8 inches} (H),
380 mm {1ft 2-31/32 inches} (D)
When using the adapter box
133 mm {5-1/4 inches} (W), 133 mm {5-1/4 inches} (H),
420 mm {1ft 4-17/32 inches} (D)
Mass (approx.) When directly mounting the camera to a ceiling or wall : Approx. 2.6 kg {5.73 lbs}
When using the adapter box : Approx. 3.1 kg {6.82 lbs}
Finish Main body : Aluminum die cast or resin, metallic silver
Transparent section of front cover :
Polycarbonate resin, Clear (with rain wash coating)

NOTES

Important
– Safety Precautions : Carefully read the Basic Information,Installation Guide and Operating Instructions before using this product.
– i-PRO Co., Ltd. cannot be held responsible for the performance of the network and/or other manufacturers' products used on the network.
– Masses and dimensions are approximate.
– Specifications are subject to change without notice.
Trademarks and registered trademarks
– iPad and iPhone are trademarks of Apple Inc., registered in the U.S.and other countries. – Android is a trademark of Google LLC.
– ONVIF is a trademark of ONVIF, Inc.
– All other trademarks identified herein are the property of their respective owners
©i-PRO Co., Ltd All rights reserved / November 2022

Specifications

Data Sheet

WV-SPV781L Spec Sheet (US)

WV-SPV781L Spec Sheet (US)

No.2A-140CL, Letter Size

A&E Spec Sheet

Manuals

Installation Guide

User Manual/Operating Instruction

Firmware/Software

Firmware

WV-SFV781L, SPV781L Firmware

WV-SFV781L, SPV781L Firmware

NTSC/PAL
   How to upgrade firmware in 2 steps.
   (Click here for detail)

  • In case of firmware updating from 1.xx to 2.xx, you have to upgrade version 9.99 once, then upgrade 2.xx. Also for upgarding from 2.xx to 4.10 (or earlier), you have to upgrade version 4.00 once, then upgrade 4.10 (or later).

  • Please click here to request the firmware version 9.99 as providing the firmware is on request only; complete the form with the model number of your camera and "Request firmware version 9.99", then click "Submit" button.
    Please clear the cache memory or access with another internet browser if you cannot access the form.

WV-SFV781L, SPV781L Firmware (Chinese)

WV-SFV781L, SPV781L Firmware (Chinese)

Chinese
   How to upgrade firmware in 2 steps.
   (Click here for detail)

  • In case of firmware updating from 1.xx to 2.xx, you have to upgrade version 9.99 once, then upgrade 2.xx. Also for upgarding from 2.xx to 4.10 (or earlier), you have to upgrade version 4.00 once, then upgrade 4.10 (or later).

  • Please click here to request the firmware version 9.99 as providing the firmware is on request only; complete the form with the model number of your camera and "Request firmware version 9.99", then click "Submit" button.
    Please clear the cache memory or access with another internet browser if you cannot access the form.

Release Note

Image/CAD/BIM

Image Data

WV-SPV781L Product Image (png)

WV-SPV781L Product Image (png)

True 4K Outdoor Box Security Network Camera - WV-SPV781L Product Image

CAD Data

BIM Data

WV-SPV781L BIM

WV-SPV781L BIM

Building information models (BIMs) files

Other

Technical Document

How to firmware two-stage version up

How to firmware two-stage version up

How to upgrade firmware version 2.00 (or newer) in 2 steps and/or version 4.10 (or newer).

Close