Bullet / Box cameras

WV-X1571LN i-PRO

i-PRO Extreme H.265 Bullet camera

DISCONTINUED PRODUCT

4K Outdoor Bullet Network Camera with AI engine

  • 4K (3,840 x 2,160) up to 30fps
  • AI Intelligent Auto
  • Color night vision (0.006 to 0.09 lx)
  • H.265 Smart Coding
  • ClearSight Coating
  • FIPS140-2 CAVP compliant
    *Using encryption module standardized by FIPS publication 140-2
  • NDAA Compliant

Successor model : WV-S15700-V2LN

  • ONVIF_G_M_S_T

There are 3 AI functions available through the camera: detecting suspicious changes in captured scenes, optimizing the image
settings of the camera (based on captured scene analysis) for better image usability, and optimizing video compression through
captured scenes to save bandwidth at 50%* lower than existing cameras while maintaining image quality.
* Compared to Smart Coding OFF with H.265

Optimization of image quality and data compression using AI engine
- AI detects, identifies and determines movement.
- AI determines human faces and captures them in the most visible state.
- AI determines moving objects, identifies where there is no movement, and performs efficient data compression.

Third-party relationship
- To enable 3rd party companies to develop their applications using SDK.
- Users can freely combine applications and introduce analysis software that is the best match for their requirements.

Easy installation
- AI analysis automatically applies optimal settings, allowing you to capture high-quality images effortlessly.
- Connect the network cable to the camera body simply by opening a part of the packaging, saving you time and working space.

• i-PRO Network Camera with AI Engine

Camera

COMPONENT SPECIFICATION
Image Sensor 1/1.8 type CMOS image sensor
Minimum Illumination Color : 0.09 lx, BW : 0.05 lx
(F1.5, Maximum shutter : Off (1/30s), AGC : 11)
BW : 0 lx
(F1.5, Maximum shutter : Off (1/30 s), AGC : 11, when the IR LED is lit)
Color : 0.006 lx, BW : 0.003 lx
(F1.5, Maximum shutter : max. 16/30s, AGC : 11)
White Balance ATW1/ATW2/AWC
Shutter Speed [30fps mode] 1/30 Fix to 1/10000 Fix [25fps mode] 1/25 Fix to 1/10000 Fix
AI Intelligent Auto On / Off
Super Dynamic On / Off, the level can be set in the range of 0 to 31.
Dynamic Range Max.132 dB (Super Dynamic : On, Level : 31)
Adaptive Black Stretch The level can be set in the range of 0 to 255.
Back Light Compensation/High Light Compensation BLC (Back light compensation) / HLC (High light compensation) / Off
The level can be set in the range of 0 to 31.
(only when Super dynamic / AI Intelligent Auto : Off)
Fog Compensation On / Off , The level can be set in the range of 0 to 8
(only when AI Intelligent auto / auto contrast adjust : Off)
Maximum Gain The level can be set in the range of 0 to 11.
Color/BW (ICR) Off / On (IR Light Off) / On (IR Light On) / Auto1(IR Light Off) /
Auto2 (IR Light On) / Auto3 (SCC)
IR LED Light High / Middle / Low / Off,
Maximum irradiation distance : 40 m {Approx. 131 ft}
Digital Noise Reduction (DNR) The level can be set in the range of 0 to 255.
Video Motion Detection (VMD) On / Off, 4 areas available
Scene Change Detection On / Off, 1 area available
Privacy Zone On / Off, Up to 8 zones available
Image Rotation 0 ° (Off) / 90 ° / 180 ° (Upside-down) / 270 °
Camera Title (OSD) On / Off Up to 20 characters (alphanumeric characters, marks)

Lens

COMPONENT SPECIFICATION
Optical Zoom 2.0x (Motorized zoom / Motorized focus)
Extra optical zoom 6.0x (when resolution is 1280x720)
Digital (Electronic) Zoom Choose from 3 levels of x1, x2, x4
Focal Length 4.3 mm – 8.6 mm {5/32 inches – 11/32 inches}
Maximum Aperture Ratio 1 : 1.5 (WIDE) – 1 : 2.4(TELE)
Focus Range 1 m {39-3/8 inches} – ∞
Angular Field of View [16 : 9 mode ] *[4:3 mode] is not supported.
Horizontal : 53° (TELE) – 104° (WIDE), Vertical : 30° (TELE) – 56° (WIDE)

DORI

COMPONENT SPECIFICATION
Detect (25ppm / 8ft) Wide: 60.00 m / 196.86 ft, Tele: 154.04 m / 505.37 ft
Observe (62.5ppm / 19ft) Wide: 24.00 m / 78.74 ft, Tele: 61.61 m / 202.15 ft
Recognize (125ppm / 38ft) Wide: 12.00 m / 39.37 ft, Tele: 30.81 m / 101.07 ft
Identify (250ppm / 76ft) Wide: 6.00 m / 19.69 ft, Tele: 15.40 m / 50.54 ft

Adjusting Angle

COMPONENT SPECIFICATION
Ceiling Mounting Horizontal : ±180 ° (Adjust by horizontal (PAN) angle)
Vertical : 0 ° to 100 ° (Adjust by vertical (TILT) angle)
Yaw : –190 ° to +100 ° (Adjust by azimuth (YAW) angle)
Wall Mounting Horizontal : ±100 ° (Adjust by vertical (TILT) angle)*
Vertical : ±100 ° (Adjust by vertical (TILT) angle)*
Yaw : –190 ° to +100 ° (Adjust by azimuth (YAW) angle)
*You can change between horizontal and vertical angels by adjusting
the horizontal (PAN) angle.

Browser GUI

COMPONENT SPECIFICATION
Camera Control Brightness, AUX On / Off
Audio Mic (Line) Input : On / Off Volume adjustment : Low / Middle / High
Audio Output : On / Off Volume adjustment : Low / Middle / High
GUI / Setup Menu Language English, Italian, French, German, Spanish, Portuguese, Russian,
Chinese, Japanese

Network

COMPONENT SPECIFICATION
Network IF 10Base-T / 100Base-TX, RJ45 connector
Resolution H.265/ H.264/JPEG (MJPEG) [16 : 9 mode ] *[4:3 mode] is not supported.
3840×2160, 2560×1440, 1920×1080, 1280×720, 640×360, 320×180
H.265/ H.264 [Transmission Mode]
Constant bit rate / VBR / Frame rate / Best effort

[Transmission Type]
Unicast port (AUTO)/ Unicast port (MANUAL)/ Multicast
JPEG Image Quality
10 steps
Smart Coding Smart Facial Coding : On (Smart Facial Coding*) / On (Auto VIQS) / Off
*Smart Facial Coding is only available with Stream(1).
GOP (Group of pictures) control :
On (Frame rate control)* / On (Advanced)* / On (Mid) / On (Low) / Off
*On (Frame rate control) and On (Advanced) are only available with H.265.
Audio Compression G.726 (ADPCM) : 16 kbps / 32 kbps , G.711 : 64 kbps
AAC-LC : 64 kbps / 96 kbps / 128 kbps
Audio Transmission Mode Off / Mic (Line) input / Audio output / Interactive (Half duplex) /
Interactive (Full duplex)
Supported Protocol IPv6 : TCP/IP, UDP/IP, HTTP, HTTPS, FTP, SMTP, DNS, NTP, SNMP,
DHCPv6, RTP, MLD, ICMP, ARP, IEEE 802.1X, DiffServ,
SSL/TLS, MQTT, LLDP
IPv4 : TCP/IP, UDP/IP, HTTP, HTTPS, RTSP, RTP, RTP/RTCP, FTP,
SMTP, DHCP, DNS, DDNS, NTP, SNMP, UPnP, IGMP, ICMP,
ARP, IEEE 802.1X, DiffServ, SSL/TLS, MQTT, LLDP
No. of Simultaneous Users Up to 14 users (Depends on network conditions)
SDXC/SDHC/SD Memory Card (Option) H.265 / H.264 recording :
Manual REC / Alarm REC (Pre/Post) / Schedule REC / Backup upon network failure
JPEG recording :
Manual REC / Alarm REC (Pre/Post) / Backup upon network failure
Compatible SDXC/SDHC/SD Memory Card :
Panasonic 2 GB, 4 GB*, 8 GB*, 16 GB*, 32 GB*, 64 GB**, 128 GB**, 256 GB** model
*SDHC card, ** SDXC card (except miniSD card and microSD card)
Mobile Terminal Compatibility iPad, iPhone, AndroidTM terminals
ONVIF Profile G / M / S / T

Alarm

COMPONENT SPECIFICATION
Alarm Source (Alarm/Event) 3 terminals input, VMD alarm, SCD alarm, Command alarm
Alarm Actions SDXC/SDHC/SD memory recording, E-mail notification,
HTTP alarm notification, Indication on browser, FTP image transfer,
TCP alarm notification output

Input/Output

COMPONENT SPECIFICATION
Monitor Output (for Adjustment) VBS : 1.0 V [p-p] / 75 Ω, composite, Pin jack
An NTSC or PAL signal can be outputted from camera
Audio Input ø3.5 mm stereo mini jack

For microphone input : Recommended applicable microphone : Plug-in power type
(Sensitivity of microphone : -48 dB±3 dB (0 dB=1 V/Pa, 1 kHz))
Input impedance : Approx. 2 kΩ (unbalanced)
Supply voltage : 2.5 V ±0.5 V

For line input : Input level : Approx. –10 dBV
Audio Output ø3.5 mm stereo mini jack (Audio output is monaural.)
Output impedance : Approx. 600 Ω (unbalanced)
Output level : –20 dBV
External I/O Terminals (Cable) ALARM IN 1(Alarm input 1/ Black & white input/ Auto time adjustment input) (x1),
ALARM IN 2 (Alarm input 2/ ALARM OUT) (x1),
ALARM IN 3 (Alarm input 3/ AUX OUT) (x1)

General

COMPONENT SPECIFICATION
Safety UL (UL60950-1), c-UL (CSA C22.2 No.60950-1), CE, IEC60950-1
EMC FCC (Part15 ClassA), ICES003 ClassA, EN55032 ClassB, EN55024
Power Source and Power Consumption DC power supply : DC 12 V 930 mA/Approx. 11.2 W
PoE (IEEE802.3af compliant) Device : DC48 V 240 mA/Approx. 11.5 W (Class 0 device)
Ambient Operating Temperature -40 °C to +60 °C (-40 °F to +140 °F)
(Power On range : –30 °C to +60 °C {–22 °F to +140 °F})
Ambient Operating Humidity 10 to 100 % (no condensation)
Dehumidification Device Rosahl element
Water and Dust Resistance IP66 (IEC60529), Type 4X (UL50E), NEMA 4X compliant
Shock Resistance IK10 (IEC 62262)
Wind Resistance Up to 40 m/s {approx. 89 mph}
Dimensions With adapter box : 133 mm (W) x 133 mm (H) x 377 mm (L)
{5-1/4 inches(W) x 5-1/4 inches(H) x 14-27/32 inches(L)}
Without adapter box : 130 mm (W) x 130 mm (H) x 337 mm (L)
{5-1/8 inches(W) x 5-1/8 inches(H) x 13-9/32 inches(L)}
Mass With adapter box : 2.2 kg {4.85 lbs}
Without adapter box : 1.7 kg {3.75 lbs}
Finish Main body : Aluminum die cast and resin, i-PRO white
Outer fixing screws : Stainless steel (Corrosion-resistant treatment)
Front panel : Polycarbonate resin (with ClearSight coating), Clear

NOTES

Important
– Safety Precautions : Carefully read the Basic Information,Installation Guide and Operating Instructions before using this product.
– i-PRO Co., Ltd. cannot be held responsible for the performance of the network and/or other manufacturers' products used on the network.
– Masses and dimensions are approximate.
– Specifications are subject to change without notice.
Trademarks and registered trademarks
– iPad and iPhone are trademarks of Apple Inc., registered in the U.S.and other countries. – Android is a trademark of Google LLC.
– ONVIF is a trademark of ONVIF, Inc.
– All other trademarks identified herein are the property of their respective owners
©i-PRO Co., Ltd All rights reserved / November 2022

Specifications

Data Sheet

A&E Spec Sheet

Manuals

Installation Guide

User Manual/Operating Instruction

Firmware/Software

Firmware

WV-X1551LN etc. Firmware

WV-X1551LN etc. Firmware

NTSC/PAL

[Important notice regarding WV-XAE200W]

- For use with version 1.11 or later of this firmware, WV-XAE200W needs to be upgraded to version 1.20 or later.
- Version 1.00 of this firmware supports WV-XAE200W version 1.00 only.

Release Note

Image/CAD/BIM

Image Data

CAD Data

BIM Data

WV-X1551LN, WV-X1571LN BIM

WV-X1551LN, WV-X1571LN BIM

Building information models (BIMs) files

Certification

Certificate of Compliance

Close