5.Set the camera (PTZ part)

You can manually or automatically adjust the zoom or focus of the displayed image.
You can set zoom and focus by clicking the [Camera control] buttons on the live image page.
1.
Configure [Zoom], [Focus], and [Displays the auto focus frame] on the [PTZ] tab
Left-click the control pad to adjust the horizontal position (PAN) and vertical position (TILT) of the image.
Right-click the control pad to adjust the zoom and focus. Zoom can also be adjusted with the mouse wheel.
If you set an area to be hidden, you can move the camera's field of view while keeping the area hidden.
Live image page setup panel>[Detailed setting]>[Camera detailed setting]>[Image/Audio] in the Advanced menu on the left>[Privacy zone] in the [Image quality] tab>Click [Setup] to open the Privacy Zone Setting window.
(1)
Select the [Privacy zone] view format
(2)
Select the number of zones you want to set in [Zone No].
(3)
Drag the desired area with the mouse and click the [Set] button.
The privacy zone is set.
You can select the information displayed in the image when you manually operate it.
Live image page setup panel>[Detailed setting]>[Camera detailed setting]>Clicking [PTZ] in the Advanced menu on the left displays the [Cam. Function] menu.
(1)
From the [Camera position display] pull-down menu, select the information you want to view and click [Set].
Set the camera operation, preset position, and auto tracking.
Live image page setup panel>[Detailed setting]>[Camera detailed setting]>When [PTZ] is clicked in the Advanced menu on the left, the settings pages for the respective function is displayed.
When you want to shoot in a specific area, you can control the shooting area by limiting the camera's operation in the PAN direction and the TILT direction.
Live image page setup panel>[Detailed setting]>[Camera detailed setting]>[PTZ] in the Advanced menu on the left>[Position] tab>To Advanced Settings on the right-hand side of the [Pan/tilt range setting]>>Click [Click] to display the setting page.
(1)
Set the [Pan/tilt range setting] to [On] and set the angle of view in each direction.
The [Left end] angle should be smaller than the [Right end] angle and the [Bottom end] angle should be larger than the [Top end] angle. If [Upside-down] is set to [On], the [Bottom end] angle must be less than the [Top end] angle.
The selected action can be started from the [Auto mode] on the [PTZ] pane of the live image page. Settings for each operation are made from the Advanced menu.
When movement is detected in the set alarm area, the target is automatically tracked and shot.
Live image page setup panel>[Detailed setting]>[Camera detailed setting]>[PTZ] in the Advanced menu on the left>Clicking on the [Auto track setting] tab displays the auto-tracking settings window.
(1)
Set items by clicking [Basic settings]
Select the object or size to be detected.
(2)
Set auto-tracking by clicking [Auto track activation setting]
Select whether to automatically track auto pan, preset sequence, etc.
(3)
Set auto-tracking by clicking [Auto track activation setting (Area)]
Select whether or not to automatically track [Detection object] in the area you set up.
Turn the set range of movement of the PAN automatically to take a picture.
Live image page setup panel>[Detailed setting]>[Camera detailed setting]>[PTZ] in the Advanced menu on the left>[Position] tab>To Advanced Settings in [Auto pan]>>Click the [Auto Pan] button to open the [Auto Pan Setting] window.
(1)
Set the left and right endpoints using the [Zoom], [Focus], and Control pads/buttons.
(2)
Set the stopping time/speed/turn direction with [Auto pan].
Move the preset position registered as the area you want to shoot in order from the lowest preset number.
Live image page setup panel>[Detailed setting]>[Camera detailed setting]>[PTZ] in the Advanced menu on the left>[Position] tab>To Advanced Settings in [Preset sequence setting]>>Click the [button] to display the preset sequence setting window.
(1)
Select [Preset sequence 1]
The preset position selection screen is displayed.
(2)
Select the number of the preset position to shoot and set it.
The patrol function stores PAN/TILT/ZOOM/Focus and reproduces the stored operation. When you register a patrol, a patrol is displayed on the [Auto mode] of the live image page.
[Set] of live image pages>[Detailed setting]>[Camera detailed setting]>[PTZ]>[Position]>To Advanced Settings in [Patrol]>>Click this button to display the setting screen of the patrol.
(1)
Select the number of patrols to be stored and the number of patrols to be set.
(2)
Set [Zoom], [Focus], Control Pad, [Brightness], [Preset]

・For more information on patrols, refer to the User manual.


・The contents registered in the advanced settings can be changed on the live image page.


Image monitoring can be enhanced by identifying and detecting human cries, broken glass sounds, horns, guns, and other sounds.
Live image page setup panel>[Detailed setting]>[Camera detailed setting]>[Display]>Advanced Menu>[Alarm]>Clicking on the [Audio detection] tab displays the configuration pages.
For more information about AI Sound Classification, see below.
WHITE PAPER
(1)
Set [Audio detection] to [On] to set sound detection.
(2)
Select Sensitivity of Detection with [Detection sensitivity].
(3)
Select the sound to be detected by [AI analytics target].
Selection of [Other] is not recommended in conjunction with other sounds detected. For example, when a gun sound is detected with the settings for detecting two sounds: [Gunshot] and [Other], it is detected as two sounds.
For validated external microphones, see below.
Verification result of external microphones
Audio data can be recorded to SD recording when an alarm is detected.
(1)
Select whether to record audio data in the SD recording setting screen.
[On] : Audio data is saved in videos (MP4 format).
[Off]: Audio data is not saved in videos (MP4 format).