|
|
(1) Launch an IP Setting Software ・ The model number and MAC address of the detected camera are displayed. ・ The default setting for the [Network Settings] of the PTZ and multi parts is [DHCP]. |
(2) Double-click the camera's IP address ・ The browser starts and the administrator registration screen is displayed. ・ Double-click the IP address of the PTZ part and the IP address of the multi part. Administrator registration is required for each camera. |
![]() |
(3) Enter administrator username and password ・ Enter the username and password in both the PTZ and multi parts. ・ When [Set both cameras] is checked, the information entered in either the PTZ part or the multi part is set to both cameras. |
![]() |
(4) Set the language, date and time, and screen ・ You can set the language and date and time and change the background color of the screen and the layout of the operation panel. (5) Click [Set] ・ The Installation Settings window is displayed. (6) Select the position of the TILT adjustment lever set when the camera is installed. ・ Live image pages are displayed. |
![]() |
① The currently selected camera is displayed. ② PTZ part switching button ③ Snapshot button ④ Stream selection display button ⑤ Support button ⑥ Full Screen View button ⑦ Camera control panel display button ⑧ [Set] button ⑨ Main area ⑩ [Tilt adjustment lever position] can be used to change the position of the TILT levers. ⑪ Basic settings are available on the [Basic] tab. |
When the layout is [Up/Down] (multi part) |
![]() |
![]() |
① The currently selected camera is displayed. ② Multi part switching button ③ Snapshot button ④ Stream selection display button ⑤ Support button ⑥ Full Screen View button ⑦ [Grid display] button ⑧ Camera control panel display button ⑨ [Set] button ⑩ Main area ⑪ Basic settings are available on the [Basic] tab. |
When the layout is [Up/Down](PTZ part) |
![]() |
|