15[Schedule] for scheduling

[Note:]

・The items that can be set differ depending on the function of the model.


・Refer to the catalog specifications for the functions installed in each model.


・[PTZ] Only PTZ cameras can be set for position refresh, automatic tracking start permission, auto pan, patrol, and preset sequence.
The Schedule page sets up schedules for the following items:

・Alarm input permission (Terminals 1, 2 and 3)


・Alarm input permission (terminal 1)


・Alarm input permission (terminal 2)


・Alarm input permission (terminal 3)


・Operation detection permission


・Permission to detect disturbance


・Sound detection permission


・Image disclosure permission


・SD recording


・Scene file


・Regular transmission of FTP/SFTP


・Permission to send mail


・Position refresh


・Preset position (1 to 256)


・Auto tracking start permission


・Auto pan


・Patrol


・Preset sequence


・All alarms detection permission (when visible net is set and schedule 8 only)


・<Auto Schedule>Daytime: Image Quality1 / Night: Image Quality 2（Schedule 1 only）


・Restart the camera (Schedule 8 only)


Schedule pages consist of [Schedule] tabs only. Up to 8 schedules can be set.
1
From the [Operation mode], select Scheduling operation.
The default setting is [Off].
[Off]:Schedule operation is not executed.
[Alarm permission(Terminal alarm 1,2,3)]:Allows the alarm input of the terminal while the schedule is being set.
[Alarm permission(Terminal alarm 1)]:The alarm input of terminal 1 is enabled while the schedule is set.
[Alarm permission(Terminal alarm 2)]:Allows alarm input of terminal 2 while schedule is set.
[Alarm permission(Terminal alarm 3)]:Allows alarm input of terminal 3 while schedule is set.
[VMD permission]:Operation detection is enabled while the schedule is set.
[SCD permission]:Permits disturbance detection while scheduled.
[Audio detection permission]:During scheduling, sound detection is enabled.
[Access permission]:Images are prohibited from being viewed by users with [2. Camera control] or [3. Live view] access levels set in the [User auth.] tabs, except when scheduled.
→13.1　[User auth.] to configure user-authentication
[SD memory recording]:When the scheduled time is reached, SD recording set by [Recording stream] is executed. It is valid only when [Recording format] is streamed.
[All detect permission]:If [DDNS] is set to [Viewnetcam.com], only Schedule 8 can be selected. All alarm inputs are allowed while the schedule is set. [Sun] and [24h] are automatically set from [Mon] and cannot be changed.
[Image quality 1]:Scene1 (Scene File 1): When the scheduled time is reached, the image quality is set to [Scene File 1]. When the scheduled time is over, the [Scene file is not applied] image quality is set.
[Image quality 2]:Scene2 (Scene File 2): When the scheduled time is reached, the image quality is set to [Scene File 2]. When the scheduled time is over, the [Scene file is not applied] image quality is set.
[Image quality 3]:Scene3 (Scene File 3): When the scheduled time is reached, the image quality is set to [Scene File 3]. When the scheduled time is over, the [Scene file is not applied] image quality is set.
[Image quality 4]:Scene4 (Scene File 4): When the scheduled time is reached, the image quality is set to [Scene File 4]. When the scheduled time is over, the [Scene file is not applied] image quality is set.
[FTP/SFTP periodic image transmission]:When the scheduled time is reached, FTP/SFTP periodic transmission is executed.
[E-mail permission]:Mail notification is executed when an alarm is generated while the schedule is set.
[Reboot]:When the scheduled time is reached, the camera restarts. Only available in Schedule 8.
[Position refresh]:The position is refreshed when the scheduled time is reached.
1～256:When the scheduled time is reached, the preset position is moved from the preset position registered beforehand to the selected position.
[Auto track permission]:Allows the auto-tracking setting set on the [Auto track setting] tab while scheduling.
[Auto pan]:When the scheduled time is reached, the auto pan operation set in the [Position] tab starts.
[Patrol 1]:When the scheduled time is reached, Patrol 1, which is set in the [Position] tab, starts. It is valid only when [Patrol 1] is set.
[Patrol 2]:When the scheduled time is reached, Patrol 2 set in the [Position] tab starts. It is valid only when [Patrol 2] is set.
[Patrol 3]:When the scheduled time is reached, Patrol 3, which is set in the [Position] tab, starts. It is valid only when [Patrol 3] is set.
[Patrol 4]:When the scheduled time is reached, Patrol 4, which is set in the [Position] tab, starts. It is valid only when [Patrol 4] is set.
[Preset sequence 1]:When the scheduled time is reached, preset Sequence 1 set in the [Position] tab starts. It is valid only when [Preset sequence 1] is set.
[Preset sequence 2]:When the scheduled time is reached, preset Sequence 2 set in the [Position] tab starts. It is valid only when [Preset sequence 2] is set.
[Preset sequence 3]:When the scheduled time is reached, the preset sequence 3 set in the [Position] tab starts operation. It is valid only when [Preset sequence 3] is set.
[<Automatic schedule> Daytime: Image Quality 1 / Night: Image Quality 2]: At sunrise, the image quality is set to [Scene file 1], and at sunset, the image quality is set to [Scene file 2]. Only schedule 1 can be selected. This cannot be selected if the sunrise/sunset times have not been set. Please refer to the following for the setting method.
→15.3　How to change the image quality based on the time of sunrise/sunset
2
Checks the Day of the week boxes in which you want to schedule in [Schedule].
[Note:]

・When using [Access permission], set [User auth.] to [On] on the [User auth.] tab and [Host auth.] to [Off] on the [Host auth.] tab.
→13.1　[User auth.] to configure user-authentication
→13.2　[Host auth.] to configure host-authentication


・If you want to use [SD memory recording], set [Recording format] in the [SD memory card] tabs to streams and set [Save trigger] to [Schedule].


・Schedule 1 [<Automatic schedule> Daytime: Image Quality 1/ Night: Image Quality 2] and Schedules 2 to 8 [Image Quality 1: Scene 1 (Scene file 1)], [Image Quality 2: Scene 2 (Scene file 2)], [Image Quality 3: Scene 3 (Scene file 3)], and [Image Quality 4: Scene 4 (Scene file 4)] cannot be selected at the same time.
3
To specify the time, click [▼] to set the time. Select [24h] when no time zone is set.
[Note:]

・[PTZ] When you configure the [Auto pan] [Patrol] [Preset sequence], make sure that the times do not overlap.


・If [<Auto Schedule> Daytime: Image Quality 1/ Night: Image Quality 2] is selected in Schedule 1, the time zone setting will be disabled.
4
When [Set] is clicked after the setting is finished, the settings are displayed at the bottom of the window.
[Note:]

・The colors displayed on Schedules 1 to 8 represent the colors of the lines displayed in the Schedule field at the bottom of the screen.


・If position refresh and image quality set time are set at the same time, the image quality is reflected after position refresh is completed.


・When the operation modes of Schedules 1 to 8 are set to [Off], the following items are permissible.
Alarm input permission (terminals 1, 2 and 3)
Alarm input permission (terminal 1)
Alarm input permission (terminal 2)
Alarm input permission (terminal 3)
Operation detection permission
Obstruction Detection Permission
-Sound detection permission
-Image disclosure permission
-All alarm detection permission (when visible net is set and schedule 8 only)

15.1How to set the schedule
1
In [Schedule], tick the Day of the week boxes in which you want to schedule.
The day of the week is enabled.
2
To specify the time, click [▼] to specify the time.
If you do not specify a time zone, tick [24h].
3
When you are finished, press [Set].
The contents set at the bottom of the screen are displayed.

15.2How to Delete Schedule

1
Uncheck the Day of the week box in which you want to delete the schedule.
2
When you are finished, press [Set].
The schedule for the selected day of the week is deleted.

15.3How to change the image quality based on the time of sunrise/sunset

1
You can set the time of Sunrise and Sunrise from [Set scenes linked to Sunrise and Sunrise time].
[To scene setting (image quality adjustment)]
This is a link to the image quality adjustment for scene setting.
[Basic settings]
This is a link to the basic settings for setting the time zone.
[Auto Scheduler (Manual/City Selection)]
Select the input method for [Latitude], [Longitude], and [Altitude].
[Not used]：Disable operation mode [<Auto Schedule> Daytime: Image Quality 1 / Night: Image Quality 2].
[Manual]：Manually enter [Latitude], [Longitude], and [Altitude].
[(City name)]：Displays a list of cities. The [Latitude], [Longitude], and [Altitude] of the selected city are entered and used for [Automatic calculation result].
[Latitude]
Enter the latitude of the region of the camera you are using.
Input range: -180 to 180 (valid up to 6 decimal places)
[Longitude]
Enter the longitude of the region of the camera you are using.
Input range: -90 to 90 (valid up to 6 decimal places)
[Altitude]
Enter the altitude of the region of the camera you are using.
If left blank, it will be calculated as “10m”.
Input range: -500 to 9000 (m)
[Automatic calculation result]
The sunrise/sunset time is calculated from [Latitude], [Longitude], and [Altitude].
If you do not click the [Set] button, the calculation result will not be applied.
[Sunrise time and sunset time correction]
Perform time correction on the sunrise/sunset times in [Automatic calculation result] to determine the time applied for the image quality.
Input range: -60 to 60 (minutes)
2
Click the [Set] button.
3
Configure the schedule. Please refer to the following for the setting method.
→15.1　How to set the schedule