Caméras dôme compactes

WV-SBV111M i-PRO

Compact Dome Network camera

DISCONTINUED PRODUCT

HD Rugged Mobile Network Camera

  • 720p HD images up to 30 fps
  • Wide Dynamic Range
  • High sensitivity with Day/Night (Electrical) function: 0.04 lx (Color), 0.03 lx (B/W) at F2.2
  • Fog compensation function equipped as standard
  • IP6K9K
  • Achieves high-level vibration resistance with EN50155 and MIL-STD-810G compliance
  • NDAA Compliant

• 720p HD images up to 30 fps
• Wide Dynamic Range and ABS (Adaptive Black Stretch) technologies deliver wider dynamic range compared with conventional cameras.
• High sensitivity with Day/Night (Electrical) function: 0.04 lx (Color), 0.03 lx (B/W) at F2.2
• VIQS (Variable Image Quality on Specified area) technology allows the designated eight areas to retain higher image quality while the excluded area will have a decreased image quality, which enables to use lower image file size and bit rate.
• Digital Noise Reduction: 3D-MNR (Multi process Noise Reduction) ensures noise reduction in various conditions and achieves a low bit rate under low illumination.
• FDF (Frequency Divided Filter): Removing fine noise generated under low illumination to achieve a low bit rate.
• SDXC/SDHC/SD Memory card slot for manual recording (H.264 / JPEG), alarm recording (H.264 / JPEG) and backup upon network failure (JPEG)
• Fog compensation function equipped as standard.
• HLC (High Light Compensation) technology reduces strong light sources such as vehicle headlights to prevent camera being blinded.
• Internet mode: H.264 images can be transmitted over HTTP protocol.
• Supports SSL, DDNS (viewnetcam, RFC2136)
• “Railway applications – Electronics equipment used on rolling stock” compatible with EN50155-T3, EN50121, ECE-R10, EN45545, EN50498
• Wide coverage : [4:3 mode] Horizontal: 104 ° / Vertical: 85 °
• The camera conforms to the IP66, Type 4X (UL50) and IP6K9K, is compliant with NEMA 4X ratings, and provides high dust resistance and waterproof performance.
• Achieves high-level vibration resistance with EN50155 and MIL-STD-810G compliance
• Adoption of a scratch resistant dome cover with a compact and sleek design is optimal for cameras installed on the outside of a vehicle.
• Vandal resistant mechanism for high reliability

Camera

COMPONENT SPECIFICATION
Image Sensor 1/3 type MOS image sensor
Scanning Mode Progressive
Scanning Area 4.86 mm (H) x 3.65 mm (V) {3/16 inches (H) x 5/32 inches (V)}
Minimum Illumination Color: 0.04 lx (F2.2, Maximum shutter : Off (1/30s), AGC : High)
0.003 lx (F2.2, Maximum shutter : Max. 16/30s, AGC : High)
BW: 0.03 lx (F2.2, Maximum shutter : Off (1/30s), AGC : High)
0.002 lx (F2.2, Maximum shutter : Max. 16/30s, AGC : High)
White Balance AWC (2,000 ~ 10,000 K), ATW1 (2,700 ~ 6,000 K), ATW2 (2,000 ~ 6,000 K)
Light Control Mode ELC / Indoor scene 50 Hz / Indoor scene 60 Hz
Wide Dynamic Range On / Off
Adaptive Black Stretch On / Off (only when Wide dynamic range : Off)
Fog Compensation On / Off (only when Wide dynamic range : Off)
High Light Compensation (HLC) On / Off (only when Wide dynamic range / Back light compensation (BLC): Off)
AGC On (High) / On (Mid) / On (Low) / Off
Maximum Shutter max. 1/10,000 s, max. 1/4,000 s, max. 1/2,000 s, max. 1/1,000 s,
max. 1/500 s, max. 1/250 s, max. 1/120 s, max. 1/100 s,
max. 2/120 s, max. 2/100 s, max. 3/120 s, max. 3/100 s,
max. 1/30 s, max. 2/30 s, max. 4/30 s, max. 6/30 s,
max. 10/30 s, max. 16/30 s
Day/Night (Electrical) Off / Auto
Digital Noise Reduction High / Low
Video Motion Detection On / Off, 4 areas available
Privacy Zone On / Off (up to 8 zones available)
VIQS On / Off (Max. 8 locations)
Camera Title (OSD) Up to 20 characters (alphanumeric characters, marks), On / Off
Focus Adjustment MANUAL

Lens

COMPONENT SPECIFICATION
Focal Length 1.95 mm {1/16 inches}
Digital (electronic) zoom Choose from 3 levels of x1, x2, x4
Zoom ratio x1
WV-SBV131M : Extra zoom x3 (16 : 9 mode) / x2.5 (4 : 3 mode)
WV-SBV111M : Extra zoom x2
Angular Field of View [16 : 9 mode] Horizontal : 104 ° Vertical : 69 °
[4 : 3 mode] Horizontal : 104 ° Vertical : 85 °
F Number F2.2
Focus Distance 0.5 m - ∞

Adjusting Angle

COMPONENT SPECIFICATION
Adjusting Angle Horizontal : ±170 °, Vertical : ±90 °
Image tilt adjustment range : -170 ° (Left) to +170 ° (Right)

Browser GUI

COMPONENT SPECIFICATION
Camera Control Brightness
Display Mode Spot, Quad: Image from 16 cameras can be displayed in
4 different Quad screens or 16 split screen (JPEG only).
20 characters camera title available.
Camera Title Up to 20 alphanumeric characters
Clock Display Time : 12H/24H
Date : 5 formats on the browser
Summer time (Manual)
One Shot Capture A still picture will be displayed on a newly opened window.
SD Memory Data Download Still or motion Images recorded in the SDXC/SDHC/SD memory card can be downloaded.
GUI/Setup Menu Language English, Italian, French, German, Spanish, Portuguese, Russian, Chinese, Japanese
System Log Up to 100 (Internal), Up to 4,000 (SDXC/SDHC/SD memory
when the recording format is set to JPEG.) error logs
Supported OS Microsoft® Windows® 10, Microsoft® Windows® 8.1,
Microsoft® Windows® 8, Microsoft® Windows® 7
Supported Browser Windows® Internet Explorer® 11 (32 bit)
Windows® Internet Explorer® 10 (32 bit)
Windows® Internet Explorer® 9 (32 bit)
Windows® Internet Explorer® 8 (32 bit)

Network

COMPONENT SPECIFICATION
Network IF 10Base-T / 100Base-TX, M12 connector (female)
Image Resolution •1.3 mega pixel [16 : 9]
H.264(1)(2)(3)(4) / JPEG (1)(2)(3)
1,280 x 720 / 640 x 360 / 320 x 180 / 160 x 90
•1.3 mega pixel [4 : 3]
H.264(1)(2)(3)(4) / JPEG (1)(2)(3)
1,280 x 960 / 800 x 600 / VGA / 400 x 300 / QVGA / 160 x 120
H.264 MPEG-4 [Transmission Mode]
Constant bit rate / Variable bit rate / Framerate priority / Best effort / Advanced VBR
[Frame Rate]
1 / 3 / 5 / 7.5 / 10 / 12 / 15 / 20 / 30 fps
[Bit Rate/Client]
64 / 128 / 256 / 384 / 512 / 768 / 1,024 / 1,536 / 2,048 / 3,072 /
4,096 / 6144* / 8,192* / 10,240* / 12,288* / 14,336* / 16,384* / 20,480* / 24,576* / 30,720* / 40,960 kbps*
* The available range of the H.264 bit rate varies depending on the setting selected for “image capture size”.
[Image Quality]
<When Constant bit rate or Best effort is selected>
Low / Normal / Fine
<When Variable bit rate is selected>
0 SUPER FINE /1 FINE /2 / 3 / 4 / 5 NORMAL / 6 / 7 / 8 / 9LOW
[Smart Coding mode]
On (Low / Mid / High) / Off (Only when "Variable bit rate" is selected)
[Transmission Type]
UNICAST / MULTICAST
JPEG [Image Quality]
10 steps
[Refresh interval]
0.1 fps - 30 fps
[Transmission Type]
PULL / PUSH
Total Bit Rate 64 / 128 / 256 / 384 / 512 / 768 / 1,024 / 2,048 / 4,096 / 8,192 kbps / Unlimited
Supported Protocol IPv6: TCP/IP, UDP/IP, HTTP, HTTPS, RTP, FTP, SMTP, DNS, NTP,
SNMP, DHCPv6, MLD, ICMP, ARP
IPv4: TCP/IP, UDP/IP, HTTP, HTTPS, RTSP, RTP, RTP/RTCP, FTP,
SMTP, DHCP, DNS, DDNS, NTP, SNMP, UPnP, IGMP, ICMP,ARP
FTP Client Alarm image transmission, FTP periodic transmission
(When the FTP transmission is failed, backup on an optional
SDXC/SDHC/SD memory card is available.)
No. of Simultaneous Users Up to 14 users (Depends on network conditions)
SDXC/SDHC/SD Memory Card (Option) Manufactured by Panasonic (except miniSD card and microSD card)
SDXC memory card : 64 GB, 128 GB
SDHC memory card : 4 GB, 8 GB, 16 GB, 32 GB
SD memory card : 256 MB, 512 MB, 1 GB, 2 GB
Cellular Phone Compatibility JPEG image
Mobile Terminal Compatibility iPad, iPhone, iPod touch(iOS 4.2.1 or later) ,
AndroidTM mobile terminals

Alarm

COMPONENT SPECIFICATION
Alarm Source VMD, Command alarm
Alarm Actions SDXC/SDHC/SD memory recording, E-mail notication,
Indication on browser, FTP image transfer, TCP alarm notication output
Alarm Log With SDXC/SDHC/SD memory card: 5,000 logs,
without SDXC/SDHC/SD memory card: 1,000 logs
Schedule VMD

General

COMPONENT SPECIFICATION
Safety/EMC Standard <Safety>
UL (UL60950-1), C-UL (CAN/CSA C22.2 No.60950-1), CE, IEC60950-1
<EMC>
FCC Part15 ClassA, ICES003 ClassA, EN55022 ClassB, EN55024
Power Source and Power Consumption PoE (IEEE802.3af compliant) /
PoE (Alternative A) : 48 V DC : 80 mA /
Approx.3.8 W (Class 2 device)
Ambient Operating Temperature -40 °C to +60 °C {-40 °F to 140 °F}
(Power On range : -30 °C to +60 °C {-22 °F to 140 °F})
Ambient Operating Humidity 10 % to 90 % (no condensation)
Impact Protection Compliant with IK10 (IEC 62262)
Water and Dust Resistance IP66 (IEC60529), IP6K9K, Type 4X (UL50), NEMA 4X compliant
Railway Application EN50155-T3, EN50121, ECE-R10, EN45545, EN50498
Dimensions 100 mm {3-15/16 inches} (W), 80 mm {3-5/32 inches} (H),
161 mm {6-11/32 inches} (D)
Mass (Approx.) Approx. 750 g {1.65 lbs}
Finish Main body : Aluminum die cast, Light gray
Dome cover : Polycarbonate resin, Clear (with hard coating)
Others Tamper-resistant dome cover

NOTES

Important
– Safety Precautions : Carefully read the Basic Information,Installation Guide and Operating Instructions before using this product.
– i-PRO Co., Ltd. cannot be held responsible for the performance of the network and/or other manufacturers' products used on the network.
– Masses and dimensions are approximate. Specifications are subject to change without notice.
Trademarks and registered trademarks
– iPad and iPhone are trademarks of Apple Inc., registered in the U.S.and other countries. – Android is a trademark of Google LLC.
– ONVIF is a trademark of ONVIF, Inc.
– All other trademarks identified herein are the property of their respective owners
©i-PRO Co., Ltd All rights reserved / November 2022

Caractéristiques

Data Sheet

A&E Spec Sheet

Manuals

Installation Guide

User Manual/Operating Instruction

Firmware/Software

Firmware

WV-SBV131M, SBV111M Firmware

WV-SBV131M, SBV111M Firmware

NTSC/PAL
   How to upgrade firmware in 2 steps.
   (Click here for detail)

  • In case of firmware updating from 1.xx/2.xx to 4.10 (or earlier), you have to upgrade version 4.00 once, then upgrade 4.10 (or later).

Release Note

Image/CAD/BIM

Image Data

CAD Data

BIM Data

WV-SBV131M 111M BIM

WV-SBV131M 111M BIM

Building information models (BIMs) files

Certification

Certificate of Compliance

Other

Technical Document

How to firmware two-stage version up

How to firmware two-stage version up

How to upgrade firmware version 2.00 (or newer) in 2 steps and/or version 4.10 (or newer).

WV-SW598, WV-SFN310 etc. Addendum

WV-SW598, WV-SFN310 etc. Addendum

To prevent unintended camera access by unkown party
WV-SW598, WV-SFN310 etc. Addendum (Chinese)

WV-SW598, WV-SFN310 etc. Addendum (Chinese)

To prevent unintended camera access by unkown party

Close