![]() |
|
1. Detection area number: Area change ratio - Detection area number: Displays the number of the specified detection areas. - Area change ratio : When [Display area ratio] switch is set to [On], (area over [Image change threshold])/(area of the entire detection area) × 100 (%) is displayed. 2. Duration of the error condition (minutes): (seconds) is displayed. 3. Areas above [Image change threshold] Displayed as red areas. 4. Detection area The set detection area is displayed in color. - Light blue: The duration of the abnormal condition is 00:00 and the alarm has not been detected. - Blue: Area where the alarm has not been activated because the duration of the error is less than [Detection time]. - Red: Area where the alarm is activated because the duration of the error condition is [Detection time] or longer. 5. Detection frame If [Human], [Vehicle] or [Bicycle] is checked in [Exclude from scene change] , a white box is displayed when human, vehicle or bicycle is detected. 6. Detection score When [Display score] switch is set to ON, the detection score for human, vehicle or bicycle are displayed in the detection frame. For human, head score (upper) and whole body score (lower) are displayed. When the detection scores are below the threshold, "**" is displayed. 7. Icon When [Display score] switch is set to ON, the icons of human, vehicle or bicycle are displayed in the upper left corner of the detection frame. |
![]() |
|