Update on July 6, 2026
i-PRO Co., Ltd.

Launch Tool: System Design Tool

Released Versions:
V5.30 | V5.21 | V5.20 | V5.10 | V5.00 | V4.90 | V4.82 | V4.81 | V4.80 | V4.70 | V4.60 | V4.50 or earlier

Version 5.30 

Release date: July 6, 2026

New Features / Improvements 

• Supports new cameras.
  <Aero PTZ Camera>
    WV-X67711A-Z3L3, WV-X67710A-Z3-3, WV-X67710A-Z3-1, WV-X67710A-Z3L3, WV-X67710A-Z3L1, WV-X67701A-Z3L3
    WV-X67700A-Z3L3, WV-X67700A-Z3-3, WV-X67311A-Z4L3, WV-X67310A-Z4L3, WV-X67310A-Z4L1, WV-X67310A-Z4-3
    WV-X67310A-Z4-1, WV-X67301A-Z4L3, WV-X67300A-Z4L3, WV-X67300A-Z4-3
  <Indoor PTZ Camera>
    WV-S61702A-Z3, WV-S61602A-Z3, WV-S61302A-Z4, WV-S61301A-Z2, WV-S61301A-Z2-1, WV-U61301A-Z2
  <X series dome/bullet Camera>
    WV-X25700A-V2LN, WV-X25600A-V2LN, WV-X25500A-V3LN, WV-X25300A-V3LN, WV-X22700A-V2L, WV-X22600A-V2L
    WV-X22500A-V3L, WV-X22300A-V3L, WV-X15700A-V2LN, WV-X15700A-V2L, WV-X15600A-V2LN, WV-X15600A-V2L
    WV-X15500A-V3LN, WV-X15500A-V3L, WV-X15300A-V3LN, WV-X15300A-V3L
  <High zoom bullet Camera>
    WV-X15502A-Z1LN, WV-X15502A-Z1L, WV-X15501A-Z3LN, WV-X15501A-Z3L, WV-X15501A-Z1LN, WV-X15501A-Z1L
    WV-X15302A-Z1LN, WV-X15302A-Z1L, WV-X15301A-Z1LN, WV-X15301A-Z1L
  <Multi-directional + PTZ Camera>   
    WV-X86531A-Z2, WV-X86531A-Z2-1, WV-X86530A-Z2, WV-X86530A-Z2-1
  <Multi-directional Camera>
    WV-S85402A-V2L, WV-S85402A-V2L1, WV-S85403A-V2, WV-S85403A-V2G, WV-S85403A-V2L, WV-S85403A-V2LG
    WV-S85404A-V2, WV-S85404A-V2G, WV-S85404A-V2L, WV-S85404A-V2LG, WV-S85603A-V2L, WV-S85603A-V2LG
    WV-S85604A-V2L, WV-S85604A-V2LG, WV-S85702A-V2L, WV-S85702A-V2L1, WV-S85703A-V2L, WV-S85703A-V2LG
    WV-S85704A-V2L, WV-S85704A-V2LG
• Improved the "Camera Selection (By Use)" menu.
  - Integrated "Occupancy Detection" under AI Application into "Area Counting / Occupancy Detection"
  - Expanded "Heat Map" support to include cameras other than 360-degree fisheye cameras
• Improved the usability of wall drawing.
  - Added [Delete (Line)] to enable deletion of individual lines
  - Increased the maximum number of wall points
• Added a link to the "AI Free Text Detection Simulation Tool" on the top page. *Available only when logged in　

Resolved Issues 

• Corrected an issue where search results were not reflected on the map when entering an address and pressing [Enter] while using the map service.
• Corrected an issue where project data could not be opened due to an error.
  Occurrence conditions: Changing the model to a non-multi-sensor camera after switching the [Mode] of a dual-sensor camera.
• Corrected an issue where files exported from [Project List] could not be directly imported on the [Map Screen].
  Occurrence conditions: When exporting a project with three accessories selected for a camera model with a long model name.
• Corrected an issue where the frame rate options did not match the specifications.
  Occurrence conditions: When 4 PTZ and 5M (2560x1920) are selected on the 360-degree Fisheye camera equipped with the SoC CV72.
• Corrected an issue where camera positions and wall settings were reset when importing an overlay image into the map service.
• Corrected an issue where calculation results were not displayed in "Recorder Calculation".
  Occurrence conditions: When another camera is placed after placing a multi-sensor camera on the map.
• Corrected an issue where the FOV display was not correctly updated when re-entering the PPM value.

Version 5.21 

Release date: May 11, 2026

New Features / Improvements 

• Support new cameras.
  360-degree fisheye cameras: WV‑X45701‑FILM, WV‑X45701‑F1L, WV‑X45501‑FILM, WV‑X45501‑F1L, WV‑X41701‑F1, WV‑X41501‑F1　

Resolved Issues 

• Corrected an issue where the FOV disappeared when the [Built-in IR-LED] checkbox was selected.
  Occurrence condition: When X-series AI Outdoor IR Bullet Cameras (e.g., WV-X15701-Z3LN) were set to AI-VMD.
• Corrected an issue where the [Built-in IR-LED] checkbox was displayed on models that do not support IR-LED.

Version 5.20 

Release date: March 30, 2026

New Features / Improvements 

• Added an option to select the power supply type in [PoE Budget Calculation].
• Added AI applications to [Product information (Web)] in [List View] and [Report].
• Improved the operation of walls on the map (image maps only).
• Improved the operability of the [Target Position] feature.

Version 5.10 

Release date: January 29, 2026

New Features / Improvements 

• Support bulk download of data sheets in [List View].  [More details (*1)>>]
• Added Undo/Redo functions when editing walls and blocks in [Map View].
• Added [Area Operations] menu to enable adding, deleting, and copying areas.  [More details (*2)>>]
• Improved [Registered Projects] by adding multi-selection and filtering capabilities.

 

See more details of feature improvements *1*2 

 

*1 Support bulk download of data sheets in [List View].

Added a [Product Information (Web)] tab in [List View], allowing users to download data sheets from there. 
*This feature applies to cameras only.
 

 

 

*2 Added [Area Operations] menu to enable adding, deleting, and copying areas.

• Changed the menu structure

 

 

• [Area Operations] screen

  Available operations Add an area: Right-click between area boxes Copy an area: Right-click on an area box Move areas: Left-drag an area box Delete an area: Right-click on an area box *Tooltips are displayed when hovering over area boxes

   

 

 

Resolved Issues 

• Corrected an issue where the camera icon moved with the mouse cursor when selecting a camera on Google Maps.
• Corrected an issue where security radar was not included in the bulk update target in [PoE Budget Calculation].
• Corrected an issue in the device’s [Network Settings] where a valid default gateway IP address was incorrectly flagged as invalid.
• Corrected an issue in the device’s [Network Settings] where the IP address range could not be set correctly when networks were divided by a subnet mask.
• Corrected an issue where AI People Detection, AI Vehicle Detection, and AI Face Detection were displayed as a single application in reports.

Version 5.00 

Release date: October 21, 2025

New Features / Improvements 

• Support new products.  [More details (*1)>>]
  Security Rader: WV-RD5500-C, WV-RD5500-CS, WV-RD5500-CE, WV-RD5500-CSE
• Support new cameras.
  U-series cameras: WV-U11501-V3, WV-U11301-V3, WV-U11301-F3, WV-U22501-F3L, WV-U21501-V3L, WV-U22301-F3L, WV-U21301-V3L
  WV-U15501-V3L, WV-U15301-V3L, WV-U25502-V3L, WV-U25501-F3L, WV-U25302-V3L, WV-U25301-F3L
• Added image overlay feature for [Map service] on the [Import Map] screen.
• Added export/import of the editing projects directly from the [Map View Screen].
• Support TIFF images in [Import Map].

See more details of feature improvements *1 

 

*1 Support new products: Security Rader.

[Tilt Angle Simulation for Installation]

 

Detectable area

 

• Outside the recommended Tilt angle range

 

 

• Outside the detectable tilt angle range

 

 

Version 4.90 

Release date: September 25, 2025

New Features / Improvements 

• Added 20TB and 24TB options to the following recorder calculators.
  - NXSeries (NX510 / NX410)
  - NUSeries (NU310 / NU 300 / NU201 / NU101)
• Enhanced the [Map View] and [List View] windows to allow users to modify camera numbers. [More details(*1)>>]
• Added a [Built-in IR-LED] checkbox to the [Camera Properties] section to simulate AI-VMD detection areas under 0 lx conditions. This update completes support for the remaining models with IR-LED - excluding 360-degree fisheye cameras - following the implementation in V4.80 for High zoom bullet cameras, AI rugged PTZ cameras and Rapid PTZ cameras with IR-LED.
• Enhanced security.

See more details of feature improvements *1 

 

*1 Enhanced the [Map View] and [List View] windows to allow users to modify camera numbers.

[Map View]

Right-click on a camera icon and select [Change Number] from the menu.
You can then change the camera number using the drop-down list.

 

[List View]

You can change the order of cameras by dragging and dropping cameras in the [Camera List].
Clicking the icon below will renumber the cameras accordingly.

 

Resolved Issues 

• Corrected the [Summary] list in [List View] to properly show AI apps for 360-degree fisheye cameras.

Version 4.82 

Release date: September 16, 2025

• Re-enabled the map export feature using [Map service].
  From this version, Google Map images can once again be included in exported images, PowerPoint files, and PDFs via the [Save Image] and [Report] features.

Version 4.81 

Release date: August 28, 2025

• Disabled map export feature using [Map service].
  From this version, Google map images can no longer be included in exported images, PPT files, or PDFs using the [Save Image] or [Report] features.

 Version 4.80 

Release date: June 30, 2025

New Features / Improvements 

• Added an [External Model] field to the [Camera Properties] section for the "Others" camera type.
• Added a [Built-in IR-LED] checkbox to the [Camera Properties] section for simulating the detection area of AI-VMD under 0 lx conditions. [More details(*1)>>]
  Target models: High zoom bullet cameras, AI rugged PTZ cameras and Rapid PTZ cameras with IR-LED
• Added a [Sample image] checkbox to the [Content] tab in [Report]. [More details(*2)>>]
• Removed [Non Mask Detection] from the AI Application as the application has been discontinued.
• Enhanced security.

See more details of feature improvements *1*2 

 

*1 Added a [Built-in IR-LED] checkbox to the [Camera Properties] section

Check the [Built-in IR-LED] checkbox to enable AI-VMD detection area simulation under 0 lx conditions.
(Optional: You can select a color by clicking on [FOV Color].)
In the image below, Area #1(Light red) represents the detectable area for AI-VMD, and Area #2(Red) indicates the recommended detection area.
If an object is placed beyond Area #2, a warning note will appear, as it is outside the detectable range.

 

 

*2 Added a [Sample image] checkbox to the [Content] tab in [Report]

• Check the [Sample Image] checkbox to select the type of sample image. The selected image will be included in the exported report.
   

 

 

Resolved Issues 

• Corrected an issue where the zoom ratio was not calculated correctly.
• Corrected an issue where the [Summary] tab might display "undefined" for the AI application in [List View].

Version 4.70 

Release date: June 12, 2025

New Features / Improvements 

• Support new cameras.
  U-series cameras: WV-U22750-F3L, WV-U22550-F3L, WV-U22350-F3L, WV-U15750-V3L, WV-U25751-V3L, WV-U25550-F3L, WV-U25350-F3L
• Support Product Selector and Accessory Selector features. [More details(*1)>>]
• Added 12TB and 16TB options to the following recorder calculators.
  - NXSeries (NX510 / NX410 / NX310)
  - NUSeries (NU310 / NU 300 / NU101)
• Improved user interface, including the following enhancement:
  - Improved the operability of moving Blocks and Walls on the imported map.

Version 4.60 

Release date: March 28, 2025

New Features / Improvements 

• Support new cameras.
  U-series fixed cameras: WV-U11550-V3, WV-U11350-V3, WV-U21550-V3L, WV-U21350-V3L, WV-U15550-V3L, WV-U15350-V3L, WV-U25551-V3L, WV-U25351-V3L
• Changed the default setting of [Display numbers for walls and blocks] from checked (On) to unchecked (Off) for visibility of the map.
• Improved [Map Memo] so that the size of text box will not change by zooming in/out of the map, 

Resolved Issues 

Corrected the following issues including other minor issues.

• Corrected an issue where the field of view of cameras might not appear properly on an exported report file.
  Occurrence condition: Two or more cameras are on the map