Description: This guide provides step-by-step instructions for installing the AI-Processing Relay app on an I-PRO AI-Camera and configuring the camera within the Active Guard Web-Config Tool.

1.Install the AI-Processing Relay app into the AI-Camera.

In the image above, the AI-Processing Relay app has been designated as cam3.

2.Install the AI-Processing Relay people, face, vehicle app onto the AI-Camera.

In the image above, AI-People Detection has been implemented on cam3.

3.Setup the AI-Relay app from the AI-Camera and connect the non-ai camera.
    a. Add the non-ai camera credentials and URL to complete the setup.
    b. If you're uncertain about the "HTTP JPEG Stream URL," please refer to the AI-Processing Relay app manual.
        You can locate your camera's URL by matching it with the camera's Make.
    c. Document Link (go to Chapter: 4.1.5 Non-AI cameras - page 36, 37, 38):
          AI Processing Relay for AI X-series camera - Web Guide HTML

In the image above, this shows a non-AI camera is being setup in the Relay app

4.Ensure that your AI-Camera, along with the AI-Relay app, is successfully integrated into the VMS after configuring the extension application on the camera.

5.Open the Active Guard Web-Config tool on the browser.

6.Add the AI-camera from "Add Devices > Camera(s) From VMS" option.

7.Once the AI-Camera is added, click on "Add Devices" again and click on "AI Processing Relay".

8.Add the IP address, username and password of the AI-Camera.

This will add the AI-Camera which has the AI-Relay app picking from a non-AI camera.

After incorporating the non-AI camera, the updated list should appear as follows:

Camera with AI-Processing Relay app setup is complete!