When I try to set the camera IP address manually by using IP Setting software, the error message "IPv4 addresses overlapped." is displayed. How should I do?
- Tools
- Troubleshooting
The camera IP address that you set has been already in use for other devices. Set the IP address that other devices are not used.
[ Procedure ]
1. Select the camera and click [ Network settings ] button on IP Setting software
2. Click “StaticIP” radio button at “Network Settings”, change the camera IP address in “IPv4 Address” and so on.
3. Click [ Save ] button.
- Camera is automatically rebooted and camera IP address has changed.
Article number：us-en121716
Last updated：June 11, 2025
Was this article helpful?
Thank you for your feedback!