AI On-site Learning

1. Click [Config Tool] - [Video] - [Roles and units] - [Video unit].

2. After entering camera information on the manual addition screen, click "Add and close".

 

Camera settings with iCT Settings Plug-in for Genetec.

For an overview of "iCT Settings Plug-in for Genetec", please see the Genetec-Tool-Operation Guide .

Furthermore, please refer to AI-VMD 1 to 6.

 

3. Click [Config Tool]-[Tasks]-[i-PRO Configuration Tool for Genetec]-[i-PRO Settings].

 

 

<AI On-site Learning setting>

Please see the AI On-site Learning-Wed Guide for an overview of "AI On-Site Learning Application".

Note: Make sure the AI On-site learning application and AI-VMD are installed on your camera.

 

AI On-site Learning

1. Select [Application] - [AI On-site Learning].

2. Follow the guidance displayed on the right side of the screen to complete the settings.

Each item has a         symbol. Click this symbol to display the procedure in the lower left corner of the screen.

 

<AI VMD setting>

1. Select [Application] ‐ [AI-VMD].

Select the object created by AI On-site in Detection object. (Ex: forklift)

Please refer to the AI-VMD page for other settings.

 

 

<Confirmation of AI-VMD alarm （Genetec setting）>

Please refer to the AI-VMD page for Genetec settings.

1 - A. Alarm (Event) History

To view the received alarm (event) history, go to [Security desk] - [Tasks] - [Monitoring]. Click [Add] in [Monitoring] at the bottom left of the screen to add the target camera, and the received alarm (event) history will be displayed.

 

1 - B. When you receive an alert and take action

1-B-1. Click the [Add an item] button in [Config Tool] - [Tasks] - [System] - [General settings] - [Actions Screen] and configure the [Event-to-action] settings.

1-B-2. Select "Direction Alarm" for “When”.

1-B-3. When an alarm is received, the set action will be executed.

 

Genetec Security Center 5.12 / Driver Pack 12.3