AI Audio Detection
Last update: July, 2024
AI audio detection can recognize and detect sounds of Yell, Glass break, Vehicle horn, gunshots, and other noises.
For Audio Detect (*Models that do not support the AI engine), please refer to Audio detection page.
<Genetec settings>
1. Select [Config Tool] - [Video].
2. select target camera.
3. Selecting Hardware will open the [Hardware] screen.
4. Set [Audio alarm] and [Alarm level] , finally click [Apply].
![](/products_and_solutions/sites/default/files/2024-06/Audio_detection1.png)
<Camera settings>
1. When you perform 4 on the Genetec side, the settings will be reflected in the "On/Off" and [Detection Sensitivity] of [Audio Detection] on the camera side.
![](/products_and_solutions/sites/default/files/2024-06/Audio_detection2_0.png)
2. Check the target audio of [AI analytics target].
![](/products_and_solutions/sites/default/files/2024-06/Audio_detection3.png)
3. Set [Notification] - [TCP alarm notification] to "ON".
4. Check [Alarm] in [Destination of notification] and set [Destination server address] to the address of the PC where Genetec is installed.
*3 and 4 are automatically set from Genetec when registering the camera to Genetec.
Note: When [Transmission setting for each motion detection area] is set to "On", alarm notifications other than motion detection are not performed.
![](/products_and_solutions/sites/default/files/2024-06/Audio_detection4.png)
<Genetec settings>
1. In case start recording with the [audio detection] notification, select [Config tool] - [System].
2. Select [General Settings] - [Action] .
3. Click [+] at the bottom of the screen.(*Add an item)
![](/products_and_solutions/sites/default/files/2024-06/Audio_detection5.png)
4. Click [+] to open [Event -to-action].
Set as appropriate, and finally click [Save].
![](/products_and_solutions/sites/default/files/2024-06/Audio_detection6.png)
Ex.
- When: If "Audio detection" occurs, select "Audio alarm".
- From: Select target camera.
- Action: To start recording, select "Start recording".
- Camera: Select camera to record.
- Recording duration: Set as appropriate.
*Correspondence between "event" and "Analytics target"
![](/products_and_solutions/sites/default/files/2024-07/Audio_detect11.png)
*Set [When] by referring to the table according to "Analysis target".
5. After saving, the registered contents are displayed.
![](/products_and_solutions/sites/default/files/2024-06/Audio_detection7.png)
<Confirmation method>
1. Select [Security Desk] - [Tasks] - [Camera events].
![](/products_and_solutions/sites/default/files/2024-06/Audio_detection13.png)
2. Check ”Target camera”.
3. Check ”Bookmark”.
4. Check ”Audio alarm” or "Audio analytics event".
5. Finally click [Generate report].
You can select the period.
You can further refine your selection.
![](/products_and_solutions/sites/default/files/2024-06/Audio_detection12.png)
6. When "Audio detection” occurs and the alarm is notified normally, "Audio alarm" or "Audio analytics event" is displayed in the event list.
* In case not checked the bookmark in 3, the identification target is not displayed in the details of the voice analysis event.
* The [Audio alarm] notification is received even if [Motion detection] in [Video analytics] in [Config Tool] is set to "OFF".(*The settings of 1 to 5 in ”Genetec side settings" are necessary.)
*Correspondence between "event" and "Analytics target"
![](/products_and_solutions/sites/default/files/2024-07/Audio_detect12.png)
7. Select what you want to check from the displayed list and double-click to play the recorded video.
![](/products_and_solutions/sites/default/files/2024-06/Audio_detection11.png)
Genetec Security Center 5.12 / Driver Pack 12.3