1. Home
  2. Surveillance
  3. Products
  4. WV-SFV631LT

Caméras dôme

WV-SFV631LT i-PRO

Outdoor Dome Network camera

DISCONTINUED PRODUCT

Super Dynamic 2MP (1080p) Vandal Resistant & Waterproof Dome Network Camera

Successor model : WV-S2531LTN

• 2MP(1080p) images up to 60 fps
• Super high resolution at Full HD/1,920 x 1,080 created by high sensitivity MOS Sensor.
• Maximum Screen Size is 2,048 x 1,536* @30fps, H.264 * Used by super resolution technology
• Enhanced Super Dynamic and ABS (Adaptive Black Stretch) technologies deliver 133 dB wider dynamic range compared to conventional cameras.
• Multi process NR & 3D-DNR ensures noise reduction in various conditions.
• High sensitivity with Day & Night (IR) function: 0.04 lx (Color), 0.01 lx (B/W) at F1.6
• IR LED equipped: The equipped infrared LED makes it possible to take pictures at zero lx.
• IR LED is controlled to match the environment, thereby the camera provides clear images of human faces without white blur.
• New camera attachment bracket allows an easy camera installation toward all four directions.
• ABF (Auto Back Focus) and Motorized Zoom ensures easy installation.
• Newly developed lens with aperture control function realizes the best focus in any environment.
• Face Super Dynamic Range technology ensures clear face image.
• Double SDXC/SDHC/SD Memory card slots for manual recording (H.264 / JPEG), alarm recording (H.264 / JPEG) and backup upon network failure (H.264 / JPEG). Realize long-term recording and auto backup function.
• Newly developed dome cover provides clearer images above the horizontal. Thereby, it expands the tilting range of the lens.
• Can be added new intelligent extension software in addition to built-in VMD (Video Motion Detection), alarm function.
• Fog compensation function equipped as standard.
• Super Chroma Compensation function realizes a better color reproducibility even in low illumination.
• Supports SSL, DDNS (viewnetcam, RFC2136)
• IP66 rated water and dust resistant. Compatible with IEC60529 measurement standard,Type 4X(UL50), NEMA 4X compliant.
• Vandal resistant mechanism for high reliability

Camera

COMPONENT SPECIFICATION
Image Sensor Approx. 1/3 type MOS image sensor
Effective Pixels Approx. 2.4 mega pixels
Scanning Mode Progressive scan
Scanning Area 5.346 mm (H) x 3.336 mm (V) {7/32 inches (H) x 1/8 inches (V)}
Minimum Illumination Color: 0.06 lx, BW: 0.015 lx (F1.6, Maximum shutter : Max. 1/30s, Gain : On(High)) BW: 0 lx (F1.6, Maximum shutter: Off(1/30 s), Gain: High, when the IR LED is lit)
Color: 0.0045 lx, BW: 0.0011 lx (F1.6, Maximum shutter : Max. 16/30s, Gain : On(High))
IR LED Light Off/Auto(High/Mid/Low)
IR LED Irradiation Distance 33 m (108.24 feet)
White Balance AWC (2,000 ~ 10,000 K), ATW1 (2,700 ~ 6,000 K), ATW2 (2,000 ~ 6,000 K)
Light Control Mode Outdoor scene : Automatic integration of ALC and ELC
Indoor scene [50 Hz] : Automatic integration of ALC and ELC with flickerless
Indoor scene [60 Hz] : Automatic integration of ALC and ELC with flickerless
Shutter Speed [2 mega pixel [16:9](60 fps mode)/ 1.3 mega pixel [16:9](60 fps mode)] OFF(1/60), 1/100, 1/120, 1/250, 1/500, 1/1000, 1/2000, 1/4000,1/10000 Other than [2 mega pixel [16:9](60 fps mode)/ 1.3 mega pixel [16:9](60 fps mode)] OFF(1/30), 3/100, 3/120, 2/100, 2/120, 1/100, 1/120, 1/250,1/500, 1/1000, 1/2000, 1/4000, 1/10000
Super Dynamic On(High) / On(Normal) / Off
Face Super Dynamic On/Off (only when Super Dynamic : On)
Adaptive Black Stretch On/Off (only when Super Dynamic Off )
Fog Compensation On/Off (only when Super Dynamic/ Adaptive black stretch: Off)
AGC On (Low)/ On (Mid)/ On (High)/ Off
Maximum Shutter max. 1/1000 s, max. 1/500 s, max. 1/250 s, max. 1/100 s, max. 1/60 s, max. 1/30 s, max. 2/30 s, max. 4/30 s, max. 6/30 s, max. 10/30 s, max. 16/30 s
Day/Night (IR) On/Off / Auto1 (Normal) / Auto2 (IR Light) / Auto3 (SCC)
Dynamic Range 133 dB typ. (Super Dynamic : On, Light Control Mode : indoor)
Digital Noise Reduction High / Low
Video Motion Detection On/Off, 4 areas, Sensitivity : 15 steps, Detection size : 10 steps
Privacy Zone On/Off (up to 8 zones available)
VIQS On/Off (up to 8 zones available)
Camera Title (OSD) On/Off Up to 20 characters (alphanumeric characters, marks)
Electric Zoom TELE / WIDE , Auto Coarse adjustment of Focus
Focus Adjustment ABF / MANUAL(Html only)
Lens Distortion Compensation 256 steps

Lens

COMPONENT SPECIFICATION
Vari Focal Length 9.0 ~ 22 mm, 2.4x {23/64 inches - 7/8 inches}
Angular Field of View [16 : 9 mode]
Horizontal : 13.8° (TELE) – 33.0° (WIDE)
Vertical : 7.7° (TELE) – 17.8° (WIDE)
[4 : 3 mode]
Horizontal : 11.5° (TELE) – 27.0° (WIDE)
Vertical : 8.6° (TELE) – 19.9° (WIDE)
Maximum Aperture Ratio 1 : 1.6 (WIDE) ~ 1 : 3.0 (TELE) *with Smart DOF (Depth of Field) mode
Focusing Range 1 m ~ ∞

Adjusting Angle

COMPONENT SPECIFICATION
Adjusting Angle Horizontal: ±180°, Vertical: 0-85°, Image tilt adjustment range: -45° (Left) to +300° (Right)

Browser GUI

COMPONENT SPECIFICATION
Cropping H.264(1) / H.264(2) / H.264(3) / H.264(4) / H.264(all) / JPEG(1) / JPEG(2) / JPEG(3)
Up to 4 image capture areas can be specified
Camera Control Brightness, AUX On/Off
Display Mode Spot, Quad : Image from 16 cameras can be displayed in 4 different Quad screens or 16 split screen (JPEG only). 20 characters camera title available.
Digital Zoom 1x, 2x, 4x controlled by browser GUI
Clock Display Time : 12H/24H, Date : 5 formats on the browser, Summer time (Manual)
Alarm Control Reset
One Shot Capture A still picture will be displayed on a newly opened window.
Audio Mic (Line) Input : On/Off Volume adjustment : Low / Middle / High,
Audio Output : On/Off Volume adjustment : Low / Middle / High
SD Memory Data Download Still or motion Images recorded in the SDXC/SDHC/SD memory card can be downloaded.
GUI/Setup Menu Language English, Italian, French, German, Spanish, Portuguese, Russian, Chinese, Japanese
System Log Up to 100 (Internal)
Up to 4,000 (SDXC/SDHC/SD memory when the recording format is set to JPEG.) error logs
Supported OS Microsoft® Windows® 8.1, Microsoft® Windows® 8, Microsoft® Windows® 7, Microsoft® Windows Vista®
Supported Browser Windows® Internet Explorer® 11 (32-bit), Windows® Internet Explorer® 10 (32-bit), Windows® Internet Explorer® 9 (32-bit), Windows® Internet Explorer® 8 (32-bit), Windows® Internet Explorer® 7 (32-bit)

Network

COMPONENT SPECIFICATION
Network IF 10Base-T / 100Base-TX, RJ-45 connector
Image Resolution [Image Capture Mode: 2 mega pixel [16:9] (30/60 fps)]
1,920 x 1,080 / 1,280 x 720 / 640 x 360 / 320 x 180 / 160 x 90
[Image Capture Mode: 2 mega pixel [4:3] (30fps)]
1,600 x 1,200 / 1,280 x 960 / 800 x 600 / 640 x 480 / 400 x 300 / 320 x 240 / 160 x 120
[Image Capture Mode: 3 mega pixel [4:3] (30fps)]
2,048 x 1,536* / 1,280 x 960 / 800 x 600 / 640 x 480 / 400 x 300 / 320 x 240 / 160 x 120
* Used by super resolution techniques
H.264 [Transmission Mode]
Constant bitrate / Framerate priority / Best effort / Advanced VBR
[Frame Rate]
1 / 3 / 5 / 7.5 / 10 / 12 / 15 / 20 / 30 / 60 fps
[Bit Rate/Client]
64 / 128 / 256 / 384 / 512 / 768 / 1,024 / 1,536 / 2,048 / 3,072 / 4,096 / 6,144 / 8,192 / 10,240 / 12,288 / 14,336 / 16,384 / 20,480 / 24,576 kbps
[Image Quality]
LOW / NORMAL / FINE
[Refresh interval]
0.2 / 0.25 / 0.33 / 0.5 / 1 / 2 / 3 / 4 / 5s
[Transmission Type]
Unicast / Multicast
JPEG [Image Quality]
10 steps
[Refresh interval]
0.1 fps - 30 fps
(JPEG frame rate will be restricted when displaying both JPEG and H.264 images.)
[Transmission Type]
Pull / Push
Audio Compression G.726 (ADPCM) 32 kbps / 16 kbps, G.711 64 kbps / AAC-LC
Audio Mode Off / Mic (Line) input / Audio output / Interactive (Half duplex) / Interactive (Full duplex)
Authentication for Audio Level 1 only / Level 2 higher / All users
Total Bit Rate 64 / 128 / 256 / 384 / 512 / 768 / 1,024 / 2,048 / 4,096 / 8,192 kbps / Unlimited
Supported Protocol IPv6: TCP/IP, UDP/IP, HTTP, HTTPS, FTP, SMTP, DNS, NTP, SNMP, DHCPv6, RTP, MLD, ICMP, ARP
IPv4: TCP/IP, UDP/IP, HTTP, HTTPS, RTSP, RTP, RTP/RTCP,FTP, SMTP, DHCP, DNS, DDNS, NTP, SNMP, UPnP, IGMP, ICMP, ARP
FTP Client Alarm image transmission, FTP periodic transmission
(When the FTP transmission is failed, backup on an optional SDXC/SDHC/SD memory card is available.)
No. of Simultaneous Users Up to 14 users (Depends on network conditions)
SDXC/SDHC/SD Memory Card (Option) # Manufactured by Panasonic (SD speed class 4 or higher)
# Use the SD memory card that complies with UHS-1(Ultra High Speed-1) in the case of SD Speed Class 10.
H.264 recording : Manual REC / Alarm REC (Pre/Post) / Schedule REC/ Backup upon network failure Compatible(JPEG only)
JPEG recording : Manual REC / Alarm REC (Pre/Post) / Backup upon network failure Compatible SD (SDHC/SDXC) card: Panasonic 2 GB, 4 GB*, 8 GB*, 16 GB*, 32 GB*, 64GB** model
*SDHC card, ** SDXC card (except miniSD card and microSD card)
Employment of Two SD Cards Dual Recording for Redundancy
Series Recording for long time
Cellular Phone Compatibility JPEG image, AUX control (by access level)
Mobile Terminal Compatibility iPad, iPhone, iPod touch (iOS 4.2.1 or later), AndroidTM Terminal

Alarm

COMPONENT SPECIFICATION
Alarm Source 3 terminals input, VMD, Command alarm, Audio detection alarm
Alarm Actions SDXC/SDHC/SD memory recording, E-mail notification, HTTP alarm notification Indication on browser, FTP image transfer, Panasonic protocol output
Alarm Log With SDXC/SDHC/SD memory card :
Up to 50,000 logs for each SD memory card

Schedule

COMPONENT SPECIFICATION
Schedule Mode Alarm / VMD / Access permission / H.264 recording / Scene file

Input/Output

COMPONENT SPECIFICATION
Monitor Output (for Adjustment) VBS : 1.0 V [p-p]/75 Ω, NTSC / PAL composite, ø3.5mm mini jack MONITOR OUT conversion plug included
Microphone/Line Input MIC IN and Line IN are selectable.
ø3.5 mm monaural mini jack (monaural input) (Applicable microphone: Plug-in power type)
Supply voltage: 2.5 V ±0.5 V Input impedance: Approx. 2 kΩ (unbalanced)
Audio Output ø3.5 mm stereo mini jack (monaural output)
Output impedance: Approx. 600 Ω (unbalanced)
External I/O Terminals ALARM IN 1(DAY NIGHT IN), ALARM IN 2(ALARM OUT), ALARM IN 3(AUX OUT)

General

COMPONENT SPECIFICATION
Safety UL (UL60950-1), C-UL (CAN/CSA C22.2 No.60950-1), CE, IEC60950-1
EMS FCC (Part15 ClassA), ICES-003 ClassA, EN 55032 ClassB, EN55024
Power Source and Power Consumption When IR LED is ON
DC power supply: 12 V DC/1080 mA/Approx. 12.9 W
PoE Device: 48 V DC/270 mA/Approx. 12.95 W* (Class 0 device)
* Maximum power consumption on the camera power input side.
** ONLY CONNECT 12 V DC CLASS 2 POWER SUPPLY.
Ambient Operating Temperature –45 °C ~ +50 °C (–49 °F ~ 122 °F)
Ambient Operating Humidity 20 ~ 90 % (no condensation)
Impact Protection IEC 60068-2-75 test Eh, 50 J / IEC 62262 IK10
Water and Dust Resistance IP66, IEC60529 measuring standard compatible, Type 4X(UL50), NEMA 4X compliant
Shock Resistance Compliant with 50 J IEC60068-2-75
Dimensions # Installing using the base bracket
ø164 mm x 139 mm (H) {ø6-15/32 inches x 5-15/32 inches (H)}
Dome radius 42 mm {1-21/32 inches}
Mass (Approx.) 1.6kg {3.53 lbs.}
Finish Main body : Aluminum die cast, light gray / Dome section: Clear polycarbonate resin

Caractéristiques

Data Sheet

A&E Spec Sheet

Manuals

Installation Guide

WV-SFV6, SFR6, SFN6, SPN6 Series Caution

WV-SFV6, SFR6, SFN6, SPN6 Series Caution

  • Cautions for using the IR LED
  • Cautions for mounting the enclosure
WV-SFV6, SFR6, SFN6, SPN6 Series Caution (Chinese)

WV-SFV6, SFR6, SFN6, SPN6 Series Caution (Chinese)

  • Cautions for using the IR LED
  • Cautions for mounting the enclosure

User Manual/Operating Instruction

Firmware/Software

Firmware

WV-SFV631LT Firmware

WV-SFV631LT Firmware

NTSC/PAL
   How to upgrade firmware in 2 steps.
   (Click here for detail)

  • In case of firmware updating from 1.xx to 2.xx, you have to upgrade version 9.99 once, then upgrade 2.xx. Also for upgarding from 2.xx to 4.10 (or earlier), you have to upgrade version 4.00 once, then upgrade 4.10 (or later).

  • Please click here to request the firmware version 9.99 as providing the firmware is on request only; complete the form with the model number of your camera and "Request firmware version 9.99", then click "Submit" button.
    Please clear the cache memory or access with another internet browser if you cannot access the form.

  • Important information about backing up/restoring the settings data of camera firmware ver 1.71 or older (Click here for detail)
WV-SFV631LT Firmware (Chinese)

WV-SFV631LT Firmware (Chinese)

Chinese
   How to upgrade firmware in 2 steps.
   (Click here for detail)

  • In case of firmware updating from 1.xx to 2.xx, you have to upgrade version 9.99 once, then upgrade 2.xx. Also for upgarding from 2.xx to 4.10 (or earlier), you have to upgrade version 4.00 once, then upgrade 4.10 (or later).

  • Please click here to request the firmware version 9.99 as providing the firmware is on request only; complete the form with the model number of your camera and "Request firmware version 9.99", then click "Submit" button.
    Please clear the cache memory or access with another internet browser if you cannot access the form.

  • Important information about backing up/restoring the settings data of camera firmware ver 1.71 or older (Click here for detail)

Release Note

Image/CAD/BIM

Image Data

CAD Data

BIM Data

WV-SFV3,5,6 Series BIM

WV-SFV3,5,6 Series BIM

Building information models (BIMs) files

Other

Technical Document

How to firmware two-stage version up

How to firmware two-stage version up

How to upgrade firmware version 2.00 (or newer) in 2 steps and/or version 4.10 (or newer).

WV-SFV631L, SFV611L etc. How to Upgrade (Ver1.71 or older)

WV-SFV631L, SFV611L etc. How to Upgrade (Ver1.71 or older)

Important information about backing up/restoring the settings data of camera firmware ver 1.71 or older
WV-SW397, SFN311 etc. Addendum

WV-SW397, SFN311 etc. Addendum

Added to Compatible SDXC memory cards
WV-SW397, SFN311 etc. Addendum (Chinese)

WV-SW397, SFN311 etc. Addendum (Chinese)

Added to Compatible SDXC memory cards
WV-SW598, WV-SFN310 etc. Addendum

WV-SW598, WV-SFN310 etc. Addendum

To prevent unintended camera access by unkown party
WV-SW598, WV-SFN310 etc. Addendum (Chinese)

WV-SW598, WV-SFN310 etc. Addendum (Chinese)

To prevent unintended camera access by unkown party

Close