WV-SFV781L i-PRO
Outdoor Dome Network camera
DISCONTINUED PRODUCT
4K Vandal Resistant Weatherproof Dome Network Camera
- 4K (3,840 x 2,160) images up to 30 fps, 12M pixel (4,000 x 3,000)
- Ultrawide x6 zoom lens with the newly developed 3-drive lens system
- Smart IR LED equipped
- Rain wash coating
• Smart DoF (Depth of Field): Automatically optimizes DoF to enhance focus both for near and far objects within camera view.
• Digital Noise Reduction: 3D-DNR ensures noise reduction in various conditions.
• High sensitivity with Day & Night (ICR*) function: 0.3 lx (Color), 0.04 lx (B/W) at F1.6 * ICR: IR Cut filter Removal
• Camera attachment bracket allows an easy camera installation toward all four directions.
• SDXC/SDHC/SD Memory card slot for manual recording (H.264 / JPEG), alarm recording (H.264 / JPEG) and backup upon network failure (H.264 / JPEG). Realize long-term recording and auto backup function.
• Fog compensation function equipped as standard.
• HLC (High Light Compensation) technology reduces strong light sources such as vehicle headlights to prevent camera being blinded.
• SCC (Super Chroma Compensation) function realizes a better color reproducibility even in low illumination.
• Supports SSL, DDNS (viewnetcam, RFC2136)
• IP66 rated water and dust resistant. Compatible with IEC60529 measurement standard, Type 4X(UL50), NEMA 4X compliant.
• Dehumidification device for use with various weather conditions
Camera
| COMPONENT | SPECIFICATION |
|---|---|
| Image Sensor | 1/1.7 type MOS image sensor |
| Scanning Mode | Progressive scan |
| Minimum Illumination | Color : 0.3 lx, BW : 0.04 lx, BW(with IR LED) : 0 lx (F1.6, Maximum shutter : Off (1/30s), Gain : High), Color : 0.02 lx, BW 0.003 lx (F1.6, Maximum shutter : Max. 16/30s, AGC : High) |
| IR LED Light | Off/Auto(High/Mid/Low) |
| IR LED Irradiation Distance | Approx. 30 m {98.43 feet} {at IR LED : Auto (High)} |
| White Balance | ATW1 (2,700 - 6,000 K) /ATW2 (2,000 - 6,000 K) /AWC (2,000 - 10,000 K) |
| Light Control Mode | Outdoor scene/ Indoor scene (50 Hz)/ Indoor scene (60 Hz)/ Fix shutter |
| Maximum shutter | max. 1/1000 s, max. 1/500 s, max. 1/250 s, max. 1/120 s, max. 1/100 s, max. 2/120 s, max. 2/100 s, max. 1/30 s, max. 2/30 s, max. 4/30 s, max. 6/30 s, max. 10/30 s, max. 16/30 s |
| Shutter Speed | Off(1/30), 3/100, 3/120, 2/100, 2/120, 1/100, 1/120, 1/250, 1/500, 1/1000, 1/2000, 1/4000, 1/10000 |
| Wide Dynamic Range | On / Off |
| Adaptive Black Stretch | On / Off (only when Wide dynamic range: off) |
| Fog Compensation | On / Off (only when Wide dynamic range/ Adaptive black stretch: Off) |
| High light compensation(HLC) | On / Off (only when Wide dynamic range/ Back light compensation (BLC): Off)) |
| Gain (AGC) | On (High) / On(Mid) / On(Low) / Off |
| Day/Night (IR) | Off / On / Auto1 (Normal) / Auto2 (IR Light) / Auto3 (SCC) |
| Digital Noise Reduction | High / Low |
| Video Motion Detection | On / Off, 4 areas available |
| Privacy Zone | On / Off (up to 8 zones available) |
| VIQS | On / Off (up to 8 locations) |
| Camera Title (OSD) | On / Off Up to 20 characters (alphanumeric characters, marks) |
| Focus Adjustment | ABF / Manual (Html only) |
Lens
| COMPONENT | SPECIFICATION |
|---|---|
| Vari Focal Length | 4.2 mm - 25.2 mm {5/32 inches – 1 inch} |
| Angular Field of View | [16 : 9 mode] Horizontal : 17 ° (TELE) - 96 ° (WIDE) Vertical : 9.3 ° (TELE) - 54 ° (WIDE) [4 : 3 mode] Horizontal : 17° (TELE) - 100 ° (WIDE) Vertical : 13 ° (TELE) - 75 ° (WIDE) |
| Maximum Aperture Ratio | 1 : 1.6 (WIDE) - 1 : 3.3 (TELE) |
| Focusing Range | 0.6 m - ∞ |
Adjusting Angle
| COMPONENT | SPECIFICATION |
|---|---|
| Adjusting Angle | Horizontal : ±180 ° Vertical : 0 to 85° Image tilt adjustment range : –45° (Left) to +300° (Right) |
Browser GUI
| COMPONENT | SPECIFICATION |
|---|---|
| Cropping | H.264(1) Ch1- Ch4 Up to 4 image capture areas can be speci ed. *only when Image capture mode : Cropping [16:9] (30fps mode) |
| Camera Control | Brightness, AUX ON / OFF |
| Display Mode | Spot, Quad: Image from 16 cameras can be displayed in 4 different Quad screens or 16 split screen (JPEG only). 20 characters camera title available. |
| Digital Zoom | 1x, 2x, 4x controlled by browser GUI |
| Camera Title | Up to 20 alphanumeric characters |
| Clock Display | Time: 12H/24H, Date: 5 formats on the browser, Summer time (Manual) |
| Alarm Control | Reset |
| One Shot Capture | A still picture will be displayed on a newly opened window. |
| Audio | Mic (Line) Input : On / Off Volume adjustment : Low / Middle / High Audio Output : On / Off Volume adjustment : Low / Middle / High |
| SD Memory Data Download | Still or motion Images recorded in the SDXC/SDHC/SD The recorded data can be downloaded. |
| GUI/Setup Menu Language | English, Italian, French, German, Spanish, Portuguese, Russian, Chinese, Japanese |
| System Log | Up to 100 (Internal) Up to 4,000 (SDXC/SDHC/SD memory) error logs |
| Supported OS | Microsoft® Windows® 8.1, Microsoft® Windows® 8, Microsoft® Windows® 7, Microsoft® Windows Vista® |
| Supported Browser | Windows® Internet Explorer® 11 (32 bit) Windows® Internet Explorer® 10 (32 bit) Windows® Internet Explorer® 9 (32 bit) Windows® Internet Explorer® 8 (32 bit) Windows® Internet Explorer® 7 (32 bit) |
Network
| COMPONENT | SPECIFICATION |
|---|---|
| Network IF | 10Base-T / 100Base-TX, RJ-45 connector |
| Image Resolution | •8 mega pixel [16 : 9] (30 fps mode) H.264(1): 3,840 x 2,160, up to 30 fps JPEG(2): 640 x 360 •8 mega pixel [16 : 9] (15 fps mode) H.264(1): 3,840 x 2,160, up to 15 fps Compliant with H.264 H.264(2): 1,920 x 1,080 / 1,280 x 720 / 640 x 360 / 320 x 180, up to 30 fps JPEG(1): Enables the setting of the resolution in the same way as for H.264 (1), H.264 (2), or JPEG (2). JPEG(2): 640 x 360 •12 mega pixel [4 : 3] (15 fps mode) H.264(1): 4,000 x 3,000, up to 15 fps H.264(2): 640 x 480 / 320 x 240, up to 5 fps JPEG(1): Enables the setting of the resolution in the same way as for H.264 (1), H.264 (2), or JPEG (2). JPEG(2): 640 x 480 •5 mega pixel [4 : 3] (30 fps mode) H.264(1): 2,560 x 1,920 / 2,048 x 1,536 / 1,600 x 1,200 / 1,280 x 960 / 800 x 600, up to 30 fps H.264(2): 1,280 x 960 / 800 x 600 / 640 x 480 / 320 x 240, up to 30 fps JPEG(1): Enables the setting of the resolution in the same way as for H.264 (1), H.264 (2), or JPEG (2). JPEG(2): 640 x 480 •4 mega pixel [16 : 9] (30 fps mode) H.264(1): 2,560 x 1,440 / 1,920 x 1,080 / 1,280 x 720, up to 30 fps H.264(2): 1,920 x 1,080 / 1,280 x 720 / 640 x 360 / 320 x 180, up to 30 fps H.264(3): 1,280 x 720 / 640 x 360 / 320 x 180, up to 30 fps H.264(4): 640 x 360, up to 30 fps JPEG(2): 640 x 360 •Cropping [16 : 9] (30 fps mode) H.264(1): Ch1 1,280 x 720 / 640 x 360, up to 30 fps Cropping H.264(1): Ch2 1,280 x 720 / 640 x 360, up to 30 fps Cropping H.264(1): Ch3 1,280 x 720 / 640 x 360, up to 30 fps Cropping H.264(1): Ch4 1,280 x 720 / 640 x 360, up to 30 fps Cropping H.264(2): 1,920 x 1,080 / 1,280 x 720 / 640 x 360 /320 x 180, up to 30 fps JPEG(1): Enables the setting of the resolution in the same way as for H.264 (2) or JPEG (2). JPEG(2): 640 x 360 |
| H.264 | [Transmission priority] Constant bit rate / Variable bit rate / Frame rate / Best effort / Advanced VBR [Frame Rate<When Variable bit rate, Frame rate, or AdvancedVBR is selected>] 1 / 3 / 5* / 7.5* / 10* / 12* / 15* / 20* / 30* fps * The frame rate is limited to "bit rate". When a value with an asterisk (*) is selected, the actual frame rate may be lower than the value selected. [Bit Rate/Client] 64 / 128 / 256 / 384 / 512 / 768 / 1,024 / 1,536 / 2,048 / 3,072 / 4,096 / 6,144 / 8,192 / 10,240 / 12,288 / 14,336 / 16,384 / 20,480 / 24,576 / 30,720 / 40,960 kbps * The available range of the H.264 bit rate varies depending on the setting selected for “image capture size”. [Image Quality] <When Constant bit rate or Best effort is selected> Low / Normal / Fine <When Variable bit rate is selected> 0 Super Fine / 1 Fine / 2 / 3 / 4 / 5 Normal / 6 / 7 / 8 / 9 Low [Smart Coding mode] On (Low / Mid / High) / Off (Only when "Variable bit rate" is selected) [Refresh interval] 0.2 / 0.25 / 0.33 / 0.5 / 1 / 2 / 3 / 4 / 5 s [Transmission Type] UNICAST / MULTICAST |
| JPEG | [Image Quality] 10 steps [Refresh interval] 0.1 fps - 30 fps (JPEG frame rate will be restricted when displaying both JPEG and H.264 images.) [Transmission Type] PULL / PUSH |
| Audio Compression | G.726 (ADPCM) 32 kbps / 16 kbps, G.711 64 kbps / AAC-LC*3 64 kbps / 96 kbps / 128 kbps |
| Audio transmission/ reception | Off / Mic (Line) input / Audio output / Interactive (Half duplex) / Interactive (Full duplex) |
| Authentication for Audio | Level 1 only / Level 2 higher / All users |
| Supported Protocol | IPv6: TCP/IP, UDP/IP, HTTP, HTTPS, RTP, FTP, SMTP, DNS, NTP, SNMP, DHCPv6, MLD, ICMP, ARP IPv4: TCP/IP, UDP/IP, HTTP, HTTPS, RTSP, RTP, RTP/RTCP, FTP, SMTP, DHCP, DNS, DDNS, NTP, SNMP, UPnP, IGMP, ICMP, ARP |
| FTP Client | Alarm image transmission, FTP periodic transmission (When the FTP transmission is failed, backup on an optional SDXC/SDHC/SD memory card is available.) |
| Maximum concurrent access number | Up to 14 users (Depends on network conditions) |
| SDXC/SDHC/SD Memory Card (Option) * Use the SD memory card manufactured by Panasonic (SD speed class 4 orhigher), and in the case of SD Speed Class 10, that complies with UHS-1(Ultra High Speed-1). | H.264 recording: Manual REC / Alarm REC (Pre/Post) / Schedule REC / Backup upon network failure JPEG recording: Manual REC / Alarm REC (Pre/Post) / FTP error / Backup upon network failure Compatible SD (SDHC/SDXC) card: Panasonic 2 GB, 4 GB*, 8 GB*, 16 GB*, 32 GB*, 64 GB** model *SDHC card, ** SDXC card (except miniSD card and microSD card) |
| Cellular Phone Compatibility | JPEG image, AUX control (by access level) |
| Mobile Terminal Compatibility | iPad, iPhone, iPod touch (iOS 4.2.1 or later), AndroidTM mobile terminals |
Alarm
| COMPONENT | SPECIFICATION |
|---|---|
| Alarm Source | 3 terminals input, VMD, Command alarm |
| Alarm Actions | SDXC/SDHC/SD memory recording, E-mail noti cation, Indication on browser, FTP image transfer, Panasonic protocol output |
| Alarm Log | With SDXC/SDHC/SD memory card: 50,000 logs |
| Schedule | Alarm / VMD / Access permission / H.264 recording / Scene le / FTP periodic image transmission |
Input/Output
| COMPONENT | SPECIFICATION |
|---|---|
| Monitor Output (for Adjustment) | VBS: 1.0 V [p-p] / 75 Ω, NTSC / PAL composite, RCA jack |
| Microphone/Line Input | ø3.5 mm stereo mini jack Input impedance: Approx. 2 kΩ (unbalanced) For microphone input : Recommended applicable microphone: Plug-in power type Supply voltage: 2.5 V ±0.5 V Recommended sensitivity of microphone: –48 dB±3 dB (0 dB=1 V/Pa, 1 kHz) For line input : Input level: Approx. –10 dBV |
| Audio Output | ø3.5 mm stereo mini jack Output impedance: Approx. 600 Ω (unbalanced) / Output level: –20 dBV Can be used as the monitor output by switching browser GUI. |
| External I/O Terminals | ALARM IN1 (DAY/NIGHT IN), ALARM IN2 (ALARM OUT), ALARM IN3 (AUX OUT, DAY/NIGHT OUT) |
General
| COMPONENT | SPECIFICATION |
|---|---|
| Safety | UL (UL60950-1, UL60950-22), C-UL (CAN/CSA C22.2 No.60950-1), CE, IEC60950-1 |
| EMS | FCC (Part15 ClassA), ICES003 ClassA, EN55023 ClassB, EN55022 ClassB, EN55024 |
| Power Source and Power Consumption | DC12 V : 1050 mA / Approx. 12.6 W PoE (IEEE802.3af compliant) / PoE DC48 V : 265 mA / Approx. 12.95 W (Class 0 device) |
| Ambient Operating Temperature | –45 °C to +50 °C {–49 °F to 122 °F} |
| Ambient Operating Humidity | 10 to 90 % (no condensation) |
| Impact Protection | Compliant with IK10 (IEC 62262) |
| Water and Dust Resistance | Main body: IP66 (IEC60529), Type 4X (UL50), NEMA 4X compliant |
| Dimensions | When using the attachment plate : ø228 mm x 189 mm (H) {ø8-31/32 inches x 7-7/16 inches (H)}, Dome radius 80 mm {3-5/32 inches} When using the base bracket : ø228 mm x 225 mm (H) {ø8-31/32 inches x 8-27/32 inches (H)}, Dome radius 80 mm {3-5/32 inches} |
| Mass (Approx.) | When using the attachment plate : Approx. 3.2 kg {7.05 lbs} When using the base bracket : Approx. 3.7 kg {8.16 lbs} |
| Finish | Main body : Aluminum die cast, light gray, Dome section : Clear polycarbonate resin Dome cover : Clear polycarbonate resin (Rain wash coating) |
| Others | Tamper-resistant enclosure |
NOTES
Important
– Safety Precautions : Carefully read the Basic Information,Installation Guide and Operating Instructions before using this product.
– i-PRO Co., Ltd. cannot be held responsible for the performance of the network and/or other manufacturers' products used on the network.
– Masses and dimensions are approximate.
– Specifications are subject to change without notice.
Trademarks and registered trademarks
– iPad and iPhone are trademarks of Apple Inc., registered in the U.S.and other countries. – Android is a trademark of Google LLC.
– ONVIF is a trademark of ONVIF, Inc.
– All other trademarks identified herein are the property of their respective owners
©i-PRO Co., Ltd All rights reserved / November 2022
Caractéristiques
Data Sheet
WV-SFV781L Spec Sheet (Global)
2A-139BA, A4 Size
2A-139BL, Letter Size
A&E Spec Sheet
Manuals
Installation Guide
WV-SFV781L About the protective packaging
WV-SFV781L About the protective packaging (Chinese)
WV-SPV781L, SFV781L Addendum (Chinese)
User Manual/Operating Instruction
WV-SFV481 etc. New functions and addendum (Chinese)
WV-SFV481 etc. New functions and addendum (English)
Firmware/Software
Firmware
NTSC/PAL
How to upgrade firmware in 2 steps.
(Click here for detail)
-
In case of firmware updating from 1.xx to 2.xx, you have to upgrade version 9.99 once, then upgrade 2.xx. Also for upgarding from 2.xx to 4.10 (or earlier), you have to upgrade version 4.00 once, then upgrade 4.10 (or later).
-
Please click here to request the firmware version 9.99 as providing the firmware is on request only; complete the form with the model number of your camera and "Request firmware version 9.99", then click "Submit" button.
Please clear the cache memory or access with another internet browser if you cannot access the form.
WV-SFV781L, SPV781L Firmware (Chinese)
Chinese
How to upgrade firmware in 2 steps.
(Click here for detail)
-
In case of firmware updating from 1.xx to 2.xx, you have to upgrade version 9.99 once, then upgrade 2.xx. Also for upgarding from 2.xx to 4.10 (or earlier), you have to upgrade version 4.00 once, then upgrade 4.10 (or later).
-
Please click here to request the firmware version 9.99 as providing the firmware is on request only; complete the form with the model number of your camera and "Request firmware version 9.99", then click "Submit" button.
Please clear the cache memory or access with another internet browser if you cannot access the form.
Release Note
Image/CAD/BIM
Image Data
WV-SFV781L with Base bracket Product Image
WV-SFV781L with Base bracket Product Image(eps)
WV-SFV781L without Base bracket Product Image
CAD Data
BIM Data
Other
Technical Document
How to firmware two-stage version up
How to upgrade firmware version 2.00 (or newer) in 2 steps and/or version 4.10 (or newer).
WV-SFV781L,SPV781L Addendum (Chinese)