|
![]() |
|
|
➣ Live image pages configuration panels>Clicking the [Image quality] tabs enables you to set the image quality. |
1. Select [Light control mode] - To install outdoors: Set [ELC]. - For indoor installation: Set [Indoor scene(50Hz)] or [Indoor scene(60Hz)]. 50 Hz/60 Hz can be used differently depending on the region. |
|
➣ Live image pages configuration panels>[Detailed setting]>[Camera detailed setting]>[Image] or [Image/Audio] of the Advanced menus on the left>[Image adjust] in the [Image quality] tabs>When [Setup] is clicked, the image quality adjustment setting window is displayed. |
1. Select [White balance] ・ Select from [ATW1], [ATW2], and [AWC]. |
[ATW1] |
|
[ATW2] |
|
[AWC] |
|
|
|
➣ Live image pages configuration panels>Clicking the [Image quality] tabs enables you to set the image quality. |
1. Select [Day & Night(IR)] ・ Select [Off], [On(IR Light Off)], [On(IR Light On)], [Auto1(IR Light Off)], [Auto2(IR Light On)], and [Auto3(SCC)]. |
[Off] |
|
[On(IR Light Off)] |
|
[On(IR Light On)] |
|
[Auto1(IR Light Off)] |
|
[Auto2(IR Light On)] |
|
[Auto3(SCC)] |
|
1. Remove the enclosure 2. Insert a microSD memory card into the slot |
|
|
|
➣ Live image pages configuration panels>[Detailed setting]>[Camera detailed setting]> [Basic] of the Advanced menus on the left>When [SD memory card] tab is clicked, the SD Memory Card setup page is displayed. |
(1) Select [Recording format] streams (2) Select [Save trigger] and click [Set]. (3) Click [Live] in the upper left corner and click the camera control panel display button. ・ The camera control panel is displayed. (4) Clicking [Start] on [Rec. on SD] ・ Start recording to the SD Memory Card manually. ・ You can stop recording by clicking [Stop]. After stopping, you can resume recording by clicking [Start]. |
|
➣ Live image pages cameras control panels>Clicking [Log/Play] displays the log list. |
1. View Live image pages and click the camera contol panel display button. 2. Press the [Start] on [Log/Play] button ・ The Log List screen is displayed in a separate window. 3. Press the shooting date and time displayed below [Time & date] ・ The playback page is displayed and the saved image is played. |
|
➣ Live image pages configuration panels>Clicking on the [Zoom] tabs displays the settings window. |
1. Adjust the [Extra optical zoom] |
|
➣ Live image pages configuration panels>[Detailed setting]>[Camera detailed setting]>[Image/Audio] of the Advanced menus on the left>[Privacy zone] in the [Image quality] tabs>When [Setup] is clicked, the Privacy Zone setting window is displayed. |
![]() |
(1) Drag the desired area with the mouse and press [Set] button. ・ Privacy zones are set in order from Area 1. (2) Select [Status] to view privacy zones ・ Set up the privacy zone in [On]/[Off]. |
|
➣ Live image pages configuration panels>[Detail setting]>[Camera detailed setting]>[Alarm] of the Advanced menus on the left>Clicking on the [Audio detection] tabs displays the configuration pages. |
|
1. Set [Audio detection] to [On] to set sound detection. 2. Select Sensitivity of Detection with [Detection sensitivity]. 3. Select the sound to be detected by [AI analytics target]. ・ Selection of [Other] is not recommended in conjunction with other sounds detected. For example, when a gun sound is detected with the settings for detecting two sounds: [Gunshot] and [Other], it is detected as two sounds. |
|
|
1. Select whether to record audio data in the SD Memory Card setup page. ・ [On] saves audio data in a movie (MP4 format). ・ [Off]: Audio data is not saved in movies (MP4 format). |
|
➣ Live image pages configuration panels>[Detailed setting]>[Camera detailed setting]>[Easy Setup] of the Advanced menus on the left>Clicking on the [Event action] tabs displays the configuration pages. |
|
|
➣ Live image pages configuration panels>[Detailed setting]>[Camera detailed setting]>[Alarm] of the Advanced menus on the left>Clicking on the [VMD area] tabs displays the configuration pages. |
|
|
![]() |
1. Drag through the image to set the area. ・ You can set the areas in order. 2. Adjust the [Detection area] and [Detection sensitivity] using the slider bar and then press [Set]. |
|
➣ Live image pages configuration panels>[Detail setting]>[Camera detailed setting]>[Alarm] of the Advanced menus on the left>Click the [Casing open detection] tab to display the setting page. |
|
|
➣ Live image pages configuration panels>[Detail setting]>[Camera detailed setting]>[Alarm] of the Advanced menus on the left>Click the [Impact detection] tab to display the setting page. |
|
|
・ Refer to the following support videos for the HTTPS setting method (pre-installation). →Support video ・ For information about how to configure HTTPS (CA certificate), refer to the following supported videos. →Support video |
|
➣ Live image pages configuration panels>[Stream] tabs>Set in [Image capture mode] of [Common]. |
|
|
➣ Live image pages configuration panels>[Detail setting]>[Camera detailed setting]>[Basic] of the Advanced menus on the left>Configure in the [Overlay image] tabs. |
1. Select an image with [Overlay] set to [On]. 2. Set [Position], [Permeation], and [Selection of color to be penetrated] 3. Press [Set] |
|
➣ Live image pages configuration panels>Use the [Stream] tabs. The streams of H.265 and H.264 images are set in [Stream] on the [Stream] tabs. |
・ ・ ・ Refer to the User Manual for details of each setting method. |
|
・ Fixed bit rate: The H.265 (or H.264) images are delivered at the bit rate set by [Max bit rate (per client) *]. ・ Variable bit rate: The H.265 (or H.264) images are delivered at the frame rate set by [Frame rate*] while maintaining the image quality level set by [Image quality]. At this time, the bit rate is varied within the maximum bit rate set by [Max bit rate (per client) *]. The recording capacity varies depending on the [Image quality] settings and the object status. ・ Specify Frame Rate: H.265 (or H.264) images are delivered at the frame rate set by [Frame rate*]. ・ Best effort delivery: Depending on the bandwidth of the networks, H.265 (or H.264) images are delivered with varying bit rates within the maximum bit rate set by [Max bit rate (per client) *]. |
|
➣ Live image pages configuration panels>[Detail setting]>[Camera detailed setting]>[Image] or [Image/Audio] of the Advanced menus on the left>Clicking [Image] displays the Smart Coding configuration. |
![]() This image is an image. This is different from the actual view of the screen. |
[Smart VIQS] |
|
[Smart P-picture control] |
|
[GOP control] |
|