・To clean the Dome cover, wash out hard sand grains and other adhered materials by pouring fresh water containing no lubricant or silicone substance using a hose or spray. If the stain is not removed, wipe with a soft sponge soaked with the above fresh water.
・Do not wipe dry (e.g., spread oil on the surface or damage the ClearSight Coating).
・Use neutral detergent for dishware and rinse thoroughly after use if dirt does not come off after wiping. If detergents other than neutral (weakly alkaline or slightly acidic) are used, the hydrophilic capacity of the product may deteriorate or the surface coating may peel off.
・Do not use organic solvents such as benzene and thinner.
・If spraying is used, use it after emptying to remove the initial impurities.
|