| ||||||||||||||||||||||||||||||||||||||||||
| ||||
|
| ||||||||||||||||||||||||||||||||||
*1 Only the same image capture sizes set for "Stream(1)"、 "Stream(2)"、 "Stream(3)"、 "Stream(4)" and "JPEG(2)" are selectable. *2 “2560 x 1440 (2560 x 1920)” of “stream(2)” can be selected in case of “stream(1)” is set to “2560 x 1440 (2560 x 1920)”. *3 When “3072 x 1728 (3072 x 2304)” or “2560 x 1440 (2560 x 1920)” is selected for “Stream(2)”, the frame rate will be limited to max.“15 fps (12.5fps)”. *4 When “1280 x 720” is selected for “Stream(4)”, the frame rate will be limited to max.“15 fps (12.5fps)”. *5 When the image capture size is "3072 x 1728 (3072 x 2304)"、 the refresh interval is limited to 1 fps max. and when the image capture size is "2560 x 1440 (2560 x 1920)"、 the refresh interval is limited to 2 fps max. (2.1 fps) *6 When [Off] is selected for [Stream transmission]、 the maximum frame rate is 30 fps (25 fps) |
| ||||||||||||||||||||||||||||
*1 When [Super Dynamic level] is set to 30 or more, the frame rate will be limited to max. "15 fps (12.5 fps)" |
| |||||||||
・ Up to 14 users are accessible at the same time. ・ The maximum bandwidth is 50 Mbps. |
| |||||||
| ||||
| |||||||||||||||||||||||||||||||||||||
![]() |
① [FUNCTION] indicator |
![]() |
② [ACT] indicator ③ [LINK] indicator ④ [SD] (MOUNT) indicator |
[FUNCTION] indicator |
・ When [REC notification] is set - Lights red ※Conditions for REC notification: During SD recording or video monitoring ・ When [Impact detection notification] is set - Blinks red ※Condition for Impact detection notification: When the this product casing is impacted ・ When [Casing open detection notification] is set - Blinks red ※Condition for Casing open detection notification: When the this product casing is opened |
[LINK] indicator |
When the camera is able to communicate withthe connected device - Lights orange |
[ACT] indicator |
When data is being sent via the network camera - Blinks green (accessed) |
[SD] (MOUNT) indicator |
・ When a microSD memory card is inserted and couldbe recognized - Lights off → Blinks green → Lights green ・ When data can be saved after the microSD memorycard is inserted and the SD ON/OFF button is pressed (less than 1 second) - Lights off → Lights green ・ When data can be saved to the microSD memory card - Lights green ・ When the microSD memory card is removed after holding down the SD ON/OFF button (about 2 seconds) - Lights green → Blinks green → Lights off (recording) - Lights green → Lights off (waiting for recording) ・ When data cannot be saved to the microSD memory cardbecause an abnormality was detected or the microSD memory card is configured not to be used - Lights off |
| ||||
![]() |
① [SD ON/OFF] button ② [INITIAL SET] button |
![]() |
① Ethernet cable with RJ45 plug (category 5e or better, straight, all 4 pairs (8 pins), less than 100m {328 feet}) (locally sourced) ② Monitor cable (locally procured) ③ I/O Cable (optional) ④ Audio input cable (white) ⑤ Audio output cable (black) ⑥ EXT I/O cable ⑦ Power supply cable |