3.Connect to the camera

Cameras or recorders on the same network can be automatically detected and set up in the network.
Refer to the following for details on the IP Setting Software.
Click here for more information on the IP Setting Software
Launch a IP Setting Software
The model number and MAC address of the detected camera are displayed.
The default setting for [Network Settings] is [DHCP].

・If you cannot obtain an IP address from the DHCP server, set the IP address to

Double-click on the camera's IP address
The browser starts and the administrator registration screen is displayed.
Double-click the IP address. Administrator registration is required.
Enter administrator username and password
The language and date/time setting screen is displayed..
Set the language, date and time, and screen
You can set the language and date and time and change the background color of the screen and the layout of the operation panel.
Click [Set]
Live image pages is displayed.
Camera title
[Camera to be displayed]
Stream information display
Snapshot button
Stream selection display button
Support button
Full Screen button
Camera control panel display button
[Set] buttons
Main area
Basic settings are available on the [Basic] tabs.