WJ-NX200 i-PRO
Network Disk Recorder
DISCONTINUED PRODUCT
H.265/H.264 high-throughput recorder
Successor model : WJ-NU201KG, WJ-NU300KG, WJ-NU301KG
ANAHTAR ÖZELLİK
ÖZELLİKLER
DOKÜMANTASYON VERİTABANI
İLGİLİ ÜRÜNLER
• H.265, H.264, and JPEG multi format
• Robust embedded IP security enabling a secure end-to-end PC-less surveillance solution
• Support full data encryption streaming recording for all i-Pro Extreme cameras which comply to FIPS 140-2 Level 1 standards
Secure communication and high compression recording
- Significant reduction of storage space usage through H.265 and Smart Coding.
- WJ-NX200K (120 V AC) : 9 ch. expandable to 16 ch. camera input.
WJ-NX200K/G (220 - 240 V AC) : 9 ch. expandable to 32 ch. camera input.
Supports H.265 / H.264 mixed recordings.
- DigiCert (formerly Symantec) device certificates pre-installed *1
*1 Secure Communication license is necessary.
PC-less non-VMS surveillance solution
- No camera license fees with a default number of cameras; no annual license updates required.
- Built-in GUI and Dual HDMI (4K/FHD) outputs
- Automatic camera configuration
- Image search with thumbnails
- High-speed copy to USB storage
PC-less non-VMS surveillance solution
- No camera license fees with a default number of cameras; no annual license updates required.
- Built-in GUI and Dual HDMI (4K/FHD) outputs
- Automatic camera configuration
- Image search with thumbnails
- High-speed copy to USB storage
High reliability and high efficiency data reading/writing
- Eco-writing: Acceleration of data access (reading/writing) by original file system
- Instantaneous power failure measures: Normal operation at instantaneous power failure within 200 ms; safe shutdown at power failure of 200 ms or more.
COMPONENT | SPECIFICATION |
---|---|
Compatible Vendor | Panasonic i-PRO series Network cameras, ONVIF NVT conformant camera and encoder |
Supported Image Format | H.265(HEVC), H.264, JPEG |
Supported Image Resolution | ・Aspect ratio [4 : 3] 4000x3000, 2560x1920, 2048x1536, 1280x960, 800x600, 640x480 ・Aspect ratio [16 : 9] 3840x2160, 2560x1440, 1920x1080, 1280x720, 640x360 ・Aspect ratio [1 : 1] 2992x2992, 2816x2816, 2048x2048, 1280x1280 ・Aspect ratio [9 : 16] 1080x1920, 720x1280, 360x640 |
Supported Audio Format | G.711 for Onvif, G.726 (ADPCM) 32 kbps |
Maximum Number of Cameras | [WJ-NX200K/G] MAX. 32 (Default number of cameras : 9) [WJ-NX200KP] MAX. 16 (Default number of cameras : 9) |
Recording Mode | Event, Schedule, Emergency |
Pre-Alarm Recording | Up to 15 seconds *When the delivery speed from the network camera is less than 4 Mbps. |
Sub-Stream Recording | 768 kbps (fixed data size) |
Scheduled Recording Mode | 16 programs, 3 time zones/day, Independent setup for each day of the week |
Frame Rate/Camera | Up to 60 ips (Depending on the camera) |
Camera Control | Pan/Tilt, Zoom, Focus, Brightness, Preset position call and program (up to 256), Auto mode, Click centering, Wheel zoom, Zoom reset, Auto Back Focus, Aux, Wiper (for WV-SUD638) |
Multiscreen Mode | [Main monitor] ・Control screen 4 / 9 / 16 split screen display ・Wide view screen 3 / 4 / 6 / 9 / 12 / 16 / 24 / 32 split screen display, 1 screen sequence, 4 / 9 / 16 split screen sequence [Sub monitor] 1 / 4 / 9 / 16 / 24 / 32 split screen display, 1 screen sequence, 4 / 9 / 16 split screen sequence |
Playback Control | PLAY, Rev PLAY, Pause, Stop, FF, FR, Prev Record, Next Record, Prev Image, Next Image, Go to Date, Go to Last (30 s) |
Search Mode | Search criteria : Time date, Playback by designating a timeline, VMD, Thumbnail |
Copy | Recorded data of selected cameras and time date range can be copied to USB storage. |
Camera Title | Up to 16 Characters |
Clock Display | Time : 12H/24H, Date : 5 formats |
Digital Zoom | Live / Play: 1.25x 1.5x 1.75x, 2x, 2.5x, 3x, 3.5x 4x, 5x, 6x, 7x, 8x (only for 1-screen or 4-screen) |
System Log | Operator access (500), Network error (100), Error (1,000), Event (1,000), Operation (500) |
System Setup | Setup page in English, French, Italian, Spanish, German, Russian, Portuguese, Thai, Simplified Chinese, Japanese |
360 Camera Dewarp | Only 1ch display mode |
Re-Encoding | 2Client |
SD Memory Data Download | Images recorded in the SD card in the i-PRO series cameras can be transferred to the recorder automatically. (H.265/H.264) |
GUI Language | Setup page in English, French, Italian, Spanish, German, Russian,Portuguese, Thai, Simplified Chinese, Japanese |
Required PC | CPU : IntelR Core. i7-860 or faster , RAM : 4 GB or more, VRAM : 128 MB or more (Min. 64 MB), MicrosoftR DirectXR 9.0c or later |
Alarm Source | [WJ-NX200K/G] 9x Terminal inputs, 32x Camera alarms (Panasonic Alarm Protocol), 128x Command alarms [WJ-NX200KP] 9x Terminal inputs, 16x Camera alarms (Panasonic Alarm Protocol), 128x Command alarms |
Event Mode | Off / On |
Alarm Action | Alarm recording, e-mail notification, Alarm message, Camera positioning, Terminal output, Panasonic alarm protocol output, Buzzer, Indicator |
Event Log | 1000 |
Spot Output Connector | 1x 1 V [p-p] / 75 Ω (BNC) NTSC /PAL (selectable in setup menu) |
Monitor (HDMI) Connector | [Main monitor] HDMI 4K UHD(3840x2160p) /30Hz, 4K UHD(3840x2160p) /25Hz, 1920x1080p /60Hz, 1920x1080p /50Hz, 1920x1080i /60Hz, 1920x1080i /50Hz [Sub monitor] HDMI 1920x1080p /60Hz, 1920x1080p /50Hz, 1920x1080i /60Hz, 1920x1080i /50Hz |
Audio Output Connector | -10 dBv, 600 Ω, unbalanced x1 (RCA pin jack) |
Alarm IO | Alarm input 1 - 9, Alarm output, Alarm reset input |
Control IO | Time adjustment input/output, +5 V output |
Error/Warning IO | Network error output, HDD error output, Camera error output, Recorder error output, Recording error output, Face matching output, Emergency recording input |
Mouse Connection Port | 2 (Front 1, Rear 1) |
Network Port | 2x 10BASE-T / 100BASE-TX / 1000BASE-T (RJ45) |
USB Storage | USB 3.0 / USB 2.0 memory, USB 3.0 / USB 2.0 connected HDD (except bus powered device) |
Network Interface | 2x 10BASE-T / 100BASE-TX / 1000BASE-T (RJ45) |
Maximum Recording Rate | 192 Mbps or less |
Maximum Band Width | Total 384 Mbps or less |
Supported Protocol | IPv4 : TCP/IP, UDP/IP, HTTP, HTTPS, FTP, SMTP, DNS, NTP, SNMP, RTP, RTSP, ICMP, ARP IPv6 : ICMPv6 |
Upon Alarm or Warning | |
No. of Simultaneous Users | 16 or less |
User Registration | Up to 32 users |
User Level | 3 Levels (Programmable) |
Partitioning | User level - Camera (View & Control, No Access) |
Security Method | User authentication (ID and Password), Host authentication, Alteration detection, SSL/TLS |
Time Synchronization | Terminal (Master/Slave), NTP (Server/Client) |
Summer Time | User definable (using menu setup) |
Remote Monitoring on Smartphone/Tablet | 16 clients or less |
HDD Type | 8.89 cm (3.5 inch) Serial ATA HDD, Up to 2x HDDs can be installed. |
Maximum Capacity | Up to 12 TB will be supported. |
RAID | RAID1 |
Additional Functions | Alteration detection, Save as JPEG, Two times zoom, Print, Copy, Aspect ratio switching, fish eye correction, corridor display |
Supported OS, Language | Language of the software will be English or Japanese |
Safety/EMC Standard | CE (EN60065, EN55032 ClassB, EN55024), EAC |
Power Source | [WJ-NX200K/G] 220 V - 240 V AC 50 Hz/60 Hz [WJ-NX200KP] 120 V AC 60 Hz |
Power Consumption | approx. 56 W |
Ambient Operating Temperature | Main body : +5 °C to +45 °C (41 °F to 113 °F) Mouse (provided) : +5 °C to +40 °C (41 °F to 104 °F) |
Ambient Operating Humidity | 5 % to 90 % (without condensation) |
Maximum Operating Altitude | 2,000 m (6,562 feet) above sea level |
Dimensions | 420 mm(W) x 88 mm(H) x 300 mm(D) {16-9/16 inches (W) x 3-7/16 inches (H) x 11-13/16 inches (D)} |
Mass (Approx.) | When no HDD is installed: 5.2 kg {11.5 lbs} |
Specifications
Data Sheet
No.2A-192DL
WJ-NX200K/G Spec Sheet (Global)
No.2A-192DA
A&E Spec Sheet
Manuals
Installation Guide
WJ-NX200K/G Important Information (English)
WJ-NX200K/G Important Information (French)
WJ-NX200K/G Installation Guide (English)
WJ-NX200K/G Installation Guide (French)
User Manual/Operating Instruction
Addendum for Operating Instructions (English)
WJ-NX200K/G Operating Instructions (English)
WJ-NX200K/G Operating Instructions (French)
WJ-NXSxx New functions and addendum
WJ-NXSxx Operating Instructions (English)
Secure Communication Kit
WJ-NXSxx Operating Instructions (French)
WJ-NXSxx Operating Instructions (German)
WJ-NXSxx Operating Instructions (Italian)
WJ-NXSxx Operating Instructions (Russian)
WJ-NXSxx Operating Instructions(Spanish)
Firmware/Software
Firmware
Version 5.50
NTSC/PAL
Important information:
- Click here for how to download HDD viewer.
- Download service for firmware version 2.00, 4.30, and 4.31 is unavailable. We apologize for the inconvenience this may cause.
Release Note
Product: WJ-NX200
Tool
- i-PRO Active Guard Calculator (for Video Insight/Genetec/Milestone/ASM300)
- Security Recorder Calculator for WJ-NX510/NX410/NX310 series
- Security Recorder Calculator for WJ-NX400/NX300/NX200/NX100 series
- Security Recorder Calculator for WJ-NU101/NU201/NU300/NU301 series
- Network Disk Recorder (WJ-NX400K) Calculator for VBR and CBR
- PoE budget calculator for Network Disk Recorder WJ-NU series
- PoE budget calculator for PoE Ethernet switch
Image/CAD/BIM
Image Data
CAD Data
Certification
Certificate of Compliance
Other
Technical Document
Compatibility list for extension software (Excel)
Management number: C0103
Compatibility list for extension software (PDF)
Management number: C0103