Update on April 20, 2026
i-PRO Co., Ltd.

Download Firmware: WV-ASM300 software

Priority Rank Level:   
 🅰︎: Mandatory to apply
 🅱: When issue happened
 🅲: Maintenance timing

Released Versions:
V7.70 |V7.60 |V7.50 |V7.41 | V7.40 or earlier

Version 7.70 

Release date: April 20, 2026

New Features / Improvements 

• Support new recorder versions.
  - Version 2.20 of WJ-NX310K(G), NX410K(G),and NX510K(G)
  - Version 2.20 of WJ-NU101K(G), WJ-NU201K(G), WJ-NU300K(G) and WJ-NU301K(G)
  - Version 5.90 of WJ-NX100, NX200, NX300,and NX400
• Added new functionality triggered by an alarm from the recorder.
  - Plays back the alarm-recorded video from the triggered camera on the operation monitor.
  - Displays the live video on the live monitor.
• Support new resolution 3520x3520 for 360-degree fisheye camera.
• Improved responsiveness during camera video screen switching and camera control(pan/tilt/zoom).
• Improved the ability to configure SSL communication (on/off) and port numbers based on device detection information.

Resolved Issues 

• Corrected an issue that could cause recorded data downloads to fail when the language setting was set to Thai.🅲
  Occurrence condition:
  When downloading recorded data in a Thai-language environment.
• Corrected an issue where "INSTALL: the Angle of Installation Error Detection" of the Security radar were not displayed on [SD log display/playback] window.🅲

Version 7.60 

Release date: September 29, 2025

New Features / Improvements 

• Support new recorder versions.
  - Version 2.10 of WJ-NX310K(G), NX410K(G),and NX510K(G)
  - Version 2.10 of WJ-NU101K(G), WJ-NU201K(G), WJ-NU300K(G) and WJ-NU301K(G)
  - Version 5.80 of WJ-NX100, NX200, NX300,and NX400
• Added [Packet Capture] to the [Save/Load]tab in the [Maintenance].

Resolved Issues 

• Corrected an issue where, on rare occasions, Activation Key registration may not be possible during installation.🅲
  Occurrence condition:
  When connected via a VPN network.
• Corrected an issue where dragging a camera onto the map in the [Map window] could cause the application to terminate unexpectedly.🅲
  Occurrence Condition:
  When the camera is registered to the recorder via ONVIF.
• Corrected an issue where the [Alarm log] might not be updated on rare occasions.🅲
• Corrected an issue where a version upgrade may initialize the settings of this software.🅲
  Occurrence Condition:
  When a registered camera has a title that includes an underscore character following its model name.

Version 7.50 

Release date: April 17, 2025

New Features / Improvements 

• Support new recorder versions.
  - Version 1.40 of WJ-NX310K(G), NX410K(G), and NX510K(G)
  - Version 1.60 of WJ-NU101K(G), WJ-NU201K(G), WJ-NU300K(G) and WJ-NU301K(G)
  - Version 5.70 of WJ-NX100, NX200, NX300, and NX400
• Support new resolution 2592x1944 for cameras.
• Enhanced security.
• Support cameras registered with RTSP in a recorder.

Resolved Issues 

• Corrected an issue where switching camera groups might be slow on the live sequence window.🅲
  Occurrence conditions:
  - Cameras connected through recorder are registered in the groups
  - [Live image source] of the cameras is set to "Camera"
  - Switching between the same number of multi-scereens (e.g. 9-screen to 9-screen)
• Corrected an issue that caused an unnecessary service connection error on the live window.🅲
• Corrected an issue where the positions of two images were swapped on the live monitor.🅲
  Occurrence condition:
  - Display a 6-screen camera group
  - 10-screen is selected for [Operation window (muleti-screen) with the maximum number of areas] in [Basic setup]
• Corrected an issue where the image switching might be slow when continuously selecting cameras from the [Device tree]
  or [Group].🅲

Version 7.41 

Release date: February 27, 2025

Resolved Issues 

• Corrected an issue where the audio from a recorder did not come out. 🅲
  Occurrence condition: When using a mandatory profile in Windows.