WV-ASM300 Release Note

Update on September 29, 2025
i-PRO Co., Ltd.

Download Firmware: WV-ASM300 software

Applicable model list

WV-ASM300


Priority Rank Level:   
 🅰︎: Recommended to apply
 🅱: When issue happened
 🅲: Maintenance timing

Released Versions:
V7.60 | V7.52 | V7.51 | V7.50 |V7.41 | V7.40 or earlier

Version 7.60 

Release date: September 29, 2025

New Features / Improvements 

  • Support new recorder versions.
    - Version 2.10 of WJ-NX310K(G), NX410K(G),and NX510K(G)
    - Version 2.10 of WJ-NU101K(G), WJ-NU201K(G), WJ-NU300K(G) and WJ-NU301K(G)
    - Version 5.80 of WJ-NX100, NX200, NX300,and NX400
  • Added [Packet Capture] to the [Save/Load]tab in the [Maintenance].

Resolved Issues 

  • Corrected an issue where, on rare occasions, Activation Key registration may not be possible during installation.🅲
    Occurrence condition:
    When connected via a VPN network.
  • Corrected an issue where dragging a camera onto the map in the [Map window] could cause the application to terminate unexpectedly.🅲
    Occurrence Condition:
    When the camera is registered to the recorder via ONVIF.
  • Corrected an issue where the [Alarm log] might not be updated on rare occasions.🅲
  • Corrected an issue where a version upgrade may initialize the settings of this software.🅲
    Occurrence Condition:
    When a registered camera has a title that includes an underscore character following its model name.

Version 7.52

Release date: July 31, 2025

Resolved Issues 

Corrected the following issue including other minor issue:

  • Corrected an issue where SD log playback might not start on the multi-screen display depending on the selected camera. 🅲
    Occurrence condition: V4.10 or later

Version 7.51 

Release date: May 28, 2025

Resolved Issues 

  • Corrected an issue where the NDimage Converter window might close unexpectedly on rare occasion. 🅲
    Occurrence condition: V7.20 or later
  • Corrected an issue where switching cameras or camera groups could be slow. 🅲
  • Corrected an issue where audio output could be enabled on an unselected camera. 🅲
    Occurrence condition: When displaying images in 25-screen, 36-screen, 49-screen or 64-screen layout using the Extension Software WV-ASE202

Version 7.50 

Release date: April 17, 2025

New Features / Improvements 

  • Support new recorder versions.
    - Version 1.40 of WJ-NX310K(G), NX410K(G), and NX510K(G)
    - Version 1.60 of WJ-NU101K(G), WJ-NU201K(G), WJ-NU300K(G) and WJ-NU301K(G)
    - Version 5.70 of WJ-NX100, NX200, NX300, and NX400
  • Support new resolution 2592x1944 for cameras.
  • Enhanced security.
  • Support cameras registered with RTSP in a recorder.

Resolved Issues 

  • Corrected an issue where switching camera groups might be slow on the live sequence window.🅲
    Occurrence conditions:
    - Cameras connected through recorder are registered in the groups
    - [Live image source] of the cameras is set to "Camera"
    - Switching between the same number of multi-scereens (e.g. 9-screen to 9-screen)
  • Corrected an issue that caused an unnecessary service connection error on the live window.🅲
  • Corrected an issue where the positions of two images were swapped on the live monitor.🅲
    Occurrence condition:
    - Display a 6-screen camera group
    - 10-screen is selected for [Operation window (muleti-screen) with the maximum number of areas] in [Basic setup]
  • Corrected an issue where the image switching might be slow when continuously selecting cameras from the [Device tree]
    or [Group].🅲

Version 7.41 

Release date: February 27, 2025

Resolved Issues 

  • Corrected an issue where the audio from a recorder did not come out. 🅲
    Occurrence condition: When using a mandatory profile in Windows.