How can I add a multisensor camera to my NV or NX recorder?
- Network Recorders
- Installation/Configuration
Problem Description
How does the NVR receive video from all the lenses of an i-PRO multisensor camera, when it has only 1 IP address?
Since it’s technically 1 camera, will this consume only 1 camera channel on the NVR?
The i-PRO multisensor camera will consume 1 camera channel for every lens/sensor that’s registered to the NVR.
This solution is applicable to the following recorders:
WJNX400, WJNX300, WJNX200, WJNV300, WJNV200
Each sensor will be registered using the same IP address.
To distinguish one sensor from the other, use the Options column in the Registered Information menu.
NVR Setup > Camera > Camera Registration > Registered Information, click Setup
Where Option -1 to -4 represent a sensor for this particular model
Note:
that the NX recorders (version 5.10) do not fully support 3rd party multisensor cameras, even with the ONVIF protocol. It’s possible to receive an image from the 1st sensor, but there is no way to pull video from the other sensors.
Article number：us-en124621
Last updated：October 20, 2025
Was this article helpful?