WV-SFN310 i-PRO
Indoor Dome Network camera
DISCONTINUED PRODUCT
Super Dynamic HD Dome Network Camera
Successor model : WV-SFN310A
CARACTÉRISTIQUE CLÉ
CARACTÉRISTIQUES
BASE DE DONNÉES DOCUMENTAIRES
PRODUITS CONNEXES
• 720p HD images up to 60 fps*1
• Super high resolution at HD/1,280 x 720 created by high sensitivity MOS Sensor.
• Enhanced Super Dynamic*1 and ABS (Adaptive Black Stretch) technologies deliver 133 dB wider dynamic range compared to conventional cameras.
• Multi process NR & 3D-DNR ensures noise reduction in various conditions.
• High sensitivity with Day & Night(Electrical) function: 0.01 lx (Color), 0.008 lx (B/W) at F1.6
• New camera attachment bracket allows an easy camera installation toward all four directions.
• Face Super Dynamic technology ensures clear face image.
• Newly developed dome cover provides clearer images above the horizontal. Thereby, it expands the tilting range of the lens.
• Face detection function detects the position of human face and the information is sent by XML or video stream. (Optional)
• Can be added new intelligent extension software (Optional) in addition to built-in VMD (Video Motion Detection), alarm function.
• Fog compensation function equipped as standard.
• Super Chroma Compensation function realizes a better color reproducibility even in low illumination.
• Supports SSL, DDNS (viewnetcam, RFC2136)
*1 Super Dynamic function is automatically set off on 60fps mode
Camera
COMPONENT | SPECIFICATION |
---|---|
Image Sensor | Approx. 1/3 type MOS image sensor |
Effective Pixels | Approx. 1.3 mega pixels |
Scanning Mode | Progressive scan |
Scanning Area | 4.864 mm (H) x 3.891 mm (V) {3/16 inches(H) x 5/32 inches(V) } |
Minimum Illumination | Color: less than 0.01 lx, BW: 0.008 lx (F1.6, Maximum shutter :Max. : Off (1/30s), Gain : On(High)) Color: less than 0.0007 lx, BW 0.0005 lx (F1.6, Maximum shutter : Max. 16/30s, Gain:On(High)) |
White Balance | AWC (2,000 ~ 10,000 K), ATW1 (2,700 ~ 6,000 K), ATW2 (2,000 ~ 6,000 K) |
Light Control Mode | Outdoor scene : Automatic integration of ALC and ELC Indoor scene [50 Hz] : Automatic integration of ALC and ELC with flickerless Indoor scene [60 Hz] : Automatic integration of ALC and ELC with flickerless |
Shutter Speed | 1.3 mega pixel [16:9](60 fps mode)] OFF(1/60), 1/100, 1/120, 1/250, 1/500, 1/1000, 1/2000, 1/4000,1/10000 Other than 1.3 mega pixel [16:9](60 fps mode)] OFF(1/30), 3/100, 3/120, 2/100, 2/120, 1/100, 1/120, 1/250,1/500, 1/1000,1/2000, 1/4000, 1/10000 |
Super Dynamic | On(High) / On(Normal) / Off |
Face Super Dynamic | ON / OFF (Only at Super Dynamic : ON) |
Adaptive Black Stretch | ON / OFF (Only when Super Dynamic OFF ) |
Fog Compensation | ON / OFF (Only when Super Dynamic / Adaptive black stretch: Off) |
AGC | ON (LOW, MID, HIGH) / OFF |
Electronic Sensitivity Up | max. 1/1000 s, max. 1/500 s, max. 1/250 s, max. 1/100 s, max. 1/60 s, max. 1/30 s, max. 2/30 s, max. 4/30 s, max. 6/30 s, max. 10/30 s, max. 16/30 s |
Day/Night | Electrical Mode: OFF / AUTO |
Dynamic Range | 133 dB typ. (Super Dynamic: ON, Light Control Mode : indoor) |
Digital Noise Reduction | High / Low |
Video Motion Detection | 4 areas, Sensitivity : 15 steps, Detection size : 10 steps |
Privacy Zone | Up to 8 zones |
VIQS | Up to 8 zones |
Camera Title (OSD) | Up to 20 characters (alphanumeric characters, marks) |
Electric Zoom | TELE / WIDE , Auto Coarse adjustment of Focus |
Focus Adjustment | Focus Assist |
Lens Distortion Compensation | 256 steps |
Lens
COMPONENT | SPECIFICATION |
---|---|
Vari Focal Length | 2.8 ~ 10mm {1/8 inches –13/32 inches} |
Angular Field of View | [16 : 9 mode] Horizontal : 27.9° (TELE) –100.5° (WIDE) Vertical : 15.7° (TELE) –54.8° (WIDE) [4 : 3 mode] Horizontal : 27.9° (TELE) –100.0° (WIDE) Vertical : 21.0° (TELE) –73.9° (WIDE) |
Maximum Aperture Ratio | 1 : 1.6 (WIDE) ~ 1 : 4.0 (TELE) |
Focusing Range | 0.3 m ~ ∞ |
Adjusting Angle
COMPONENT | SPECIFICATION |
---|---|
Adjusting Angle | Horizontal: ± 180°, Vertical: ± 85°,Image tilt adjustment range: -225°(Left) to +120°(Right) |
Browser GUI
COMPONENT | SPECIFICATION |
---|---|
Cropping | H.264(1) / H.264(2) / H.264(3) / H.264(4) / H.264(all) / JPEG(1) / JPEG(2) / JPEG(3) Up to 4 image capture areas can be specified |
Camera Control | Brightness, AUX ON / OFF |
Display Mode | Spot, Quad : Image from 16 cameras can be displayed in 4 different Quad screens or 16 split screen (JPEG only). 20 characters camera title available. |
Digital Zoom | 1x, 2x, 4x controlled by browser GUI |
Camera Title | Up to 20 alphanumeric characters |
Clock Display | Time : 12H/24H, Date : 5 formats on the browser, Summer time (Manual) |
Alarm Control | Reset |
One Shot Capture | A still picture will be displayed on a newly opened window. |
Audio | Mic (Line) Input : ON / OFF Volume adjustment : Low / Middle / High |
SD Memory Data Download | Still or motion Images recorded in the SDXC/SDHC/SD memory card can be downloaded. |
GUI/Setup Menu Language | English, Italian, French, German, Spanish, Portuguese, Russian, Chinese, Japanese |
System Log | Up to 100 (Internal) Up to 4,000 (SDXC/SDHC/SD memory when the recording format is set to JPEG.) error logs |
Supported OS | Microsoft® Windows® 8.1, Microsoft® Windows® 8, Microsoft® Windows® 7, Microsoft® Windows Vista® |
Supported Browser | Windows® Internet Explorer® 11.0 (32 bit), Windows® Internet Explorer® 10.0 (32 bit), Windows® Internet Explorer® 9.0 (32 bit),Windows® Internet Explorer® 8.0 (32 bit), Windows®Internet Explorer® 7.0 (32 bit) |
Network
COMPONENT | SPECIFICATION |
---|---|
Network IF | 10Base-T / 100Base-TX, RJ-45 connector |
Image Resolution | Image Capture Mode: 1.3 mega pixel [16:9] (30/60fps) 1,280 x 720 / 640 x 360 / 320 x 180 / 160 x 90 Image Capture Mode: 1.3 mega pixel [4:3] (30fps) 1,280 x 960 / 800 x 600 / 640 x 480 / 400 x 300 / 320 x 240 / 160 x 120 |
H.264 | [Transmission Mode] Constant bitrate / Framerate priority / Best effort / Advanced VBR [Frame Rate] 1 / 3 / 5 / 7.5 / 10 / 12 / 15 / 20 / 30 / 60 fps [Bit Rate/Client] 64 / 128 / 256 / 384 / 512 / 768 / 1,024 / 1,536 / 2,048 / 3,072 / 4,096 / 6,144 / 8,192 / 10,240 / 12,288 / 14,336 / 16,384 / 20,480 / 24,576 kbps [Image Quality] LOW / NORMAL / FINE [Refresh interval] 0.2 / 0.25 / 0.33 / 0.5 / 1 / 2 / 3 / 4 / 5s [Transmission Type] UNICAST / MULTICAST |
JPEG | [Image Quality] 10 steps [Refresh interval] 0.1 fps - 30 fps (JPEG frame rate will be restricted when displaying both JPEG and H.264 images.) [Transmission Type] PULL / PUSH |
Audio Compression | G.726 (ADPCM) 32 kbps / 16 kbps, G.711 64 kbps / AAC-LC |
Audio Mode | OFF / Mic (Line) input / Audio output / Interactive (Half duplex) / Interactive (Full duplex) |
Authentication for Audio | Level 1 only / Level 2 higher / All users |
Total Bit Rate | 64 / 128 / 256 / 384 / 512 / 768 / 1,024 / 2,048 / 4,096 / 8,192 kbps / Unlimited |
Supported Protocol | IPv6 : TCP/IP, UDP/IP, HTTP, HTTPS, FTP, SMTP, DNS, NTP, SNMP, DHCPv6, RTP, MLD, ICMP, ARP IPv4 : TCP/IP, UDP/IP, HTTP, HTTPS, RTSP, RTP, RTP/RTCP, FTP, SMTP, DHCP, DNS, DDNS, NTP, SNMP, UPnP, IGMP, ICMP, ARP |
FTP Client | Alarm image transmission, FTP periodic transmission (When the FTP transmission is failed, backup on an optional SDXC/SDHC/SD memory card is available.) |
No. of Simultaneous Users | Up to 14 users (Depends on network conditions) |
SDXC/SDHC/SD Memory Card (Option) | # Manufactured by Panasonic (SD speed class 4 or higher) # Use the SD memory card that complies with UHS-1 (Ultra High Speed-1) in the case of SD Speed Class 10. H.264 recording : Manual REC / Alarm REC (Pre/Post) / Schedule REC/ Backup upon network failure Compatible (JPEG only) JPEG recording : Manual REC / Alarm REC (Pre/Post) / Backup upon network failure Compatible SD (SDHC/SDXC) card: Panasonic 2 GB, 4 GB*, 8 GB*, 16 GB*, 32 GB*, 64GB** model *SDHC card, ** SDXC card (except miniSD card and microSD card) |
Cellular Phone Compatibility | JPEG image, AUX control (by access level) |
Mobile Terminal Compatibility | iPad, iPhone, iPod touch (iOS 4.2.1 or later), Android™ Terminal |
Alarm
COMPONENT | SPECIFICATION |
---|---|
Alarm Source | 3 terminals input, VMD, Command alarm, Audio detection alarm |
Alarm Actions | SDXC/SDHC/SD memory recording, E-mail notification, HTTP alarm notification Indication on browser, FTP image transfer, Panasonic protocol output |
Alarm Log | With SDXC/SDHC/SD memory card : Up to 50,000 logs for each SD memory card |
Schedule | Alarm / VMD / Access permission / H.264 recording / Scene file |
Input/Output
COMPONENT | SPECIFICATION |
---|---|
Monitor Output (for Adjustment) | VBS : 1.0 V [p-p]/75 Ω, NTSC / PAL composite, ø3.5mm mini jack MONITOR OUT conversion plug included |
Built-in Microphone | Electret condenser microphone |
External I/O Terminals | ALARM IN 1, ALARM IN 2/ALARM OUT, ALARM IN 3/AUX OUT |
General
COMPONENT | SPECIFICATION |
---|---|
Safety | UL (UL60950-1), C-UL (CAN/CSA C22.2 No.60950-1), CE, IEC60950-1 |
EMS | FCC (Part15 ClassA), ICES003 ClassA, EN55022 ClassB, EN55024 |
Power Source and Power Consumption | DC power supply: 12 V DC/310 mA/Approx. 3.7 W PoE Device: 48 V DC/120 mA/Approx. 5.8 W* (Class 2 device) * ONLY CONNECT 12 V DC CLASS 2 POWER SUPPLY. |
Ambient Operating Temperature | -10°C ~ +50°C (14 °F ~ 122 °F) |
Ambient Operating Humidity | 20 ~ 90 % (no condensation) |
Dimensions | ø129.5 mm x 101 mm (H) {ø5-3/32 inches x 3-31/32 inches (H)} Dome radius 40 mm {1-9/16 inches} |
Mass (Approx.) | 0.45 kg {1 lbs} |
Finish | Main body: ABS resin, sail white / Dome section: Clear acrylic resin |
Caractéristiques
Data Sheet
WV-SFN311, SFN310 Spec Sheet (Global)
No.2A-119, A4 Size
WV-SFN311, SFN310 Spec Sheet (US)
No.2A-119, Letter Size
A&E Spec Sheet
Manuals
Installation Guide
User Manual/Operating Instruction
Firmware/Software
Firmware
NTSC/PAL
How to upgrade firmware in 2 steps.
(Click here for detail)
-
In case of firmware updating from 1.xx to 2.xx, you have to upgrade version 9.99 once, then upgrade 2.xx. Also for upgarding from 2.xx to 4.10 (or earlier), you have to upgrade version 4.00 once, then upgrade 4.10 (or later).
-
Please click here to request the firmware version 9.99 as providing the firmware is on request only; complete the form with the model number of your camera and "Request firmware version 9.99", then click "Submit" button.
Please clear the cache memory or access with another internet browser if you cannot access the form.
- Important information about backing up/restoring the settings data of camera firmware ver 1.71 or older (Click here for detail)
WV-SFV311 etc. Firmware (Chinese)
Chinese
How to upgrade firmware in 2 steps.
(Click here for detail)
-
In case of firmware updating from 1.xx to 2.xx, you have to upgrade version 9.99 once, then upgrade 2.xx. Also for upgarding from 2.xx to 4.10 (or earlier), you have to upgrade version 4.00 once, then upgrade 4.10 (or later).
-
Please click here to request the firmware version 9.99 as providing the firmware is on request only; complete the form with the model number of your camera and "Request firmware version 9.99", then click "Submit" button.
Please clear the cache memory or access with another internet browser if you cannot access the form.
- Important information about backing up/restoring the settings data of camera firmware ver 1.71 or older (Click here for detail)
Release Note
Image/CAD/BIM
Image Data
BIM Data
Other
Technical Document
How to firmware two-stage version up
How to upgrade firmware version 2.00 (or newer) in 2 steps and/or version 4.10 (or newer).
WV-SFV631L, SFV611L etc. How to Upgrade (Ver1.71 or older)
WV-SW397, SFN311 etc. Addendum
WV-SW397, SFN311 etc. Addendum (Chinese)
WV-SW598, WV-SFN310 etc. Addendum