Schedule Maintenance : Monday July 15, from 2:00am(UTC) to 11:00am(UTC)
During this period, the service will not be available due to maintenance work.

Multi-Sensor Cameras

WV-S8544G i-PRO

Industry thinnest* multi-directional cameras with AI Engine

4x4MP(16MP) Outdoor Multi-Directional Network Camera with AI Engine (Smoke Dome type)

  • 4 x 4MP(16MP) 2688x1520 up to 30fps
  • 360° coverage with one IP address
  • Intelligent Auto (with AI Engine)
  • Super Dynamic 108dB
  • Color night vision (0.21 to 0.3 lx)
  • Smart Coding (with AI Engine)
  • Remote zoom and focus
  • Continuous view assistance
  • Wide range tilt angle adjustment mechanism
  • Built-in FIPS 140-2 Level 3 Certified Secure Element
     (EdgeLock® SE050F NXP® Semiconductors)
  • NDAA Compliant

*As of February 2022, based on i-PRO own research.


- The thinnest multi-directional camera (3.5 inches/90 mm)
It can be fitted in not only outside, but it also is fitted in inside the facility.
(Low profile/Blends in seamlessly with environment)
Even though it is rated IK10, it achieves the light weight body.

- A variety kinds of AI Apps selection
It can install and use up to 4 different types of AI Apps all together. Using AI processor which identifies object as people or vehicle,
it will reduce false alarm compared to conventional model. As result, it can be used many industries.
Also, new multi-directional has IR-LED function which will increase AI intruder detection accuracy in the low light environment.

- Easy installation

  • Just 1 LAN cable covers 4 directions.
  • Thin and hook architecture make easy installation
  • Continuous view assistance by using smartphone navigates you the best angle position.
  • You can change angle by using motorized zoom after installation.*4MP model only

- High security standard

  • Highest level of security. In addition to digital certificates issued by a third-party organization (GlobalSign®),
    FIPS 140-2 Level 3 certified EdgeLock® SE050F secure element (NXP® Semiconductors) is embeded.


Image Sensor 4x 1/2.7 type CMOS image sensor
Scanning Area 5.38 mm(H) x 3.02 mm(V)
{7/32 inches(H) × 1/8 inches(V)}
Minimum Illumination Color : 0.59 lx {30IRE, F2.0, 1/30 s}
Color : 0.85 lx {50IRE, F2.0, 1/30 s}
BW : 0.34 lx {50IRE, F2.0, 1/30 s}
White Balance ATW1/ ATW2/ AWC
Maximum shutter 30 fps mode: Max.1/10000s to Max.16/30s
25 fps mode: Max.1/10000s to Max.16/25s
Intelligent Auto On / Off
Super Dynamic On / Off,
The level can be set in the range of 0 to 31.
Dynamic Range Max. 108 dB(Super Dynamic: On, Level: 31)
Adaptive Black Stretch The level can be set in the range of 0 to 255.
Back Light Compensation/High Light Compensation BLC (Back light compensation)
HLC (High light compensation)
Off (only when Super dynamic / Intelligent Auto : Off)
Fog Compensation On / Off
(only when Intelligent auto / auto contrast adjust : Off)
Maximum Gain (AGC) The level can be set in the range of 0 to 11.
Color/BW (ICR) Off / On / Auto1(Normal) / Auto2(IR Light) / Auto3(SCC)
IR LED Light
Digital Noise Reduction The level can be set in the range of 0 to 255.
Panorama Panorama mode (H: 180 deg.)
Video Motion Detection (VMD) On / Off
4 areas available
Scene Change Detection (SCD) On / Off
1 areas available
Audio Detection On / Off
AI Sound Classification Selectable from Gunshot, Yell, Vehicle horn, Glass break
AI Analytics AI Video Motion Detection, AI Privacy Guard, AI Face Detection,
AI People Detection, AI Vehicle Detection,
AI Non mask Detection, AI Occupancy Detection, AI Scene Change Detection

For details :
3rd party applications are also available.
Privacy Zone On / Off, Up to 8 zones available
VIQS On / Off, Up to 8 zones available
Image Rotation 0° (Off)/ 90°/ 180° (Upside-down)/ 270°
Camera Title (OSD) On / Off,
Up to 40 characters, Up to 2 Lines (alphanumeric characters, marks)
Focus Adjustment Auto focus


Optical zoom 2.5x (Motorized zoom / Motorized focus)
Extra zoom max 10.5x (2.5x – 10.5x when resolution is 640x360)
Focal length 2.9 mm {1/8 inches} – 7.3 mm {1/4 inches}
Angular Field of View Horizontal: 43°(TELE) - 100°(WIDE), Vertical: 24°(TELE) - 56°(WIDE)
Maximum Aperture Ratio 1 : 2.0(WIDE) – 1 : 3.0(TELE)
Focus range 1 m {3.28 ft} – ∞


Detect (25ppm / 8ppf) Wide : 45.1 m / 148.0 ft, Tele : 136.5 m / 447.8 ft
Observe (62.5ppm / 19ppf) Wide : 18.0 m / 59.2 ft, Tele : 54.6 m / 179.1 ft
Recognize (125ppm / 38ppf) Wide : 9.0 m / 29.6 ft, Tele : 27.3 m / 89.6 ft
Identify (250ppm / 76ppf) Wide : 4.5 m / 14.8 ft, Tele : 13.6 m / 44.8 ft

System on Chip (SoC)

System on Chip (SoC) Ambarella CV2

Adjusting Angle

Adjusting Angle Camera 1, 2, 3, 4 :
Horizontal : ±125° (Adjust by horizontal (PAN) angle)
Vertical : +10° to +105° (Adjust by vertical (TILT) angle)
Yaw : ±90° (Adjust by azimuth (YAW) angle)
Twist : ±30°
*The above is the adjustable range of a single camera.
The adjustable range of each camera varies according to
the positional relationship with other cameras.

Browser GUI

Camera Control Brightness, AUX On / Off
Audio Mic (Line) Input : On / Off Volume adjustment : Low / Middle / High
Audio Output : On / Off Volume adjustment : Low / Middle / High
GUI / Setup Menu Language English, Italian, French, German, Spanish, Portuguese, Russian, Chinese, Japanese
Browser Microsoft Edge, Firefox, Google Chrome


Network IF 10Base-T / 100Base-TX / 1000Base-T, RJ45 connector
Resolution H.265/ H.264/ JPEG (MJPEG) [16 : 9 mode]
2688 x 1520 / 2560 x 1440 / 1920×1080 /1280 x 720 / 640×360 / 320×180
H.265/H.264 [Transmission Mode]
Constant bit rate / VBR / Frame rate / Best effort
[Transmission Type]
Unicast port (AUTO) / Unicast port (MANUAL) / Multicast
JPEG [Image Quality]
10 steps
Smart Coding GOP (Group of pictures) control :
On (Frame rate control)* / On (Advanced)* / On (Mid) / On (Low) / Off
*On (Frame rate control) and On (Advanced) are only available with H.265.
Smart VIQS: On(High)/On(Low)/Off, Smart P-picture control: On/Off
Audio Compression G.726 (ADPCM) : 16 kbps / 32 kbps
G.711 : 64 kbps
AAC-LC : 64 kbps / 96 kbps / 128 kbps
Audio Transmission Mode Off / Mic (Line) input / Audio output / Interactive (Half duplex) / Interactive (Full duplex)
Supported Protocol IPv6 : TCP/IP, UDP/IP, HTTP, HTTPS, SSL/TLS, SMTP, DNS, NTP, SNMPv1/v2/v3,
NTP, SNMPv1/v2/v3, UPnP, IGMP, ICMP, ARP, IEEE 802.1X, DiffServ, SRTP, LLDP, MQTT
No. of Simultaneous Users Up to 24 users
(Depends on network conditions)
Secure FIPS 140-2 level 3 (NXP® EdgeLock® SE050F), Device Certificate GlobalSign® pre-installed,
HTTPS, User authentication, Digest authentication, Host authentication,
IEEE802.1X, System log, Image transmission log, Brute-force protection, Alteration detection, Signed Firmware (V2.50 or later)
SDXC/SDHC/SD Memory Card H.265 / H.264 recording :
Manual REC / Alarm REC (Pre/Post) / Schedule REC / Backup upon network failure
JPEG recording :
Manual REC / Alarm REC (Pre/Post) / Backup upon network failure
Compatible SDXC/SDHC/SD Memory Card :
microSDXC memory card : 64 GB, 128 GB, 256 GB, 512 GB
microSDHC memory card : 4 GB, 8 GB, 16 GB, 32 GB
microSD memory card : 2 GB
Mobile Terminal Compatibility iPad, iPhone,
Android™ terminals
ONVIF® Profile G / M / S / T


Alarm Source 3 terminals input, VMD alarm, SCD alarm, Command alarm, Audio detection alarm
Alarm Actions SDXC/SDHC/SD memory recording, E-mail notification,
HTTP alarm notification Indication on browser, TCP alarm notification output


Audio input ø3.5 mm stereo mini jack

For microphone input : Recommended applicable microphone : Plug-in power type
(Sensitivity of microphone : -48 dB±3 dB (0 dB=1 V/Pa, 1 kHz))
Input impedance : Approx. 2 kΩ (unbalanced)
Supply voltage : 2.4 V ±0.5 V

For line input : Input level: Approx. –10 dBV
Audio Output ø3.5 mm stereo mini jack (monaural output)
Output impedance : Approx. 600 Ω (unbalanced)
Output level : –20 dBV
External I/O Terminals ALARM IN 1 (Alarm input 1/ Black & white input/ Auto time adjustment input) (x1)
ALARM IN 2 (Alarm input 2/ ALARM OUT) (x1), ALARM IN 3 (Alarm input 3/ ALARM OUT/ AUX OUT) (x1)
Monitor Output -
Wi-Fi USB Adapter Yes (for adjustment)


Safety UL (UL62368-1), c-UL (CSA C22.2 No.62368-1), CE, IEC62368-1
EMC FCC (Part15 ClassA), ICES-003 ClassA, EN55032 ClassA, EN55035
Power Source and Power Consumption PoE+ (IEEE802.3at compliant):
DC 54 V : 320 mA/Approx. 17.3 W (Class 4 device)
Ambient Operating Temperature –40 °C to +60 °C {–40 °F to 140 °F}
(Power On range: –20 °C to +60 °C {–4 °F to 140 °F})
Maximum temperature according to NEMA TS 2 (2.2.7): 74 °C(165 °F)
Ambient Operating Humidity 10 to 100 % (no condensation)
Anti-Condensation System Temish element + Heater + moisture absorption gel
Water and Dust Resistance IP67/IP66 (IEC 60529), Type 4X (UL50E), NEMA 4X compliant
Shock Resistance IK10 (IEC 62262)
Wind Resistance Up to 40 m/s {approx. 89 mph}
Other standard support NEMA TS 2 (2.2.7-2.2.9)
Dimensions When using the attachment plate only :
ø300 mm × 90 mm (H) {ø11-13/16 inches ×3-17/32 inches (H)}
Mass (approx.) When using the attachment plate only : Approx. 3.3 kg {7.28 lbs}
Finish Main body : Aluminum die cast, i-PRO white
Outer fixing screws : Stainless steel (Corrosion-resistant treatment)
Dome cover : PC resin, Smoke


– Safety Precautions : Carefully read the Basic Information,Installation Guide and Operating Instructions before using this product.
– i-PRO Co., Ltd. cannot be held responsible for the performance of the network and/or other manufacturers' products used on the network.
– Masses and dimensions are approximate. Specifications are subject to change without notice.
Trademarks and registered trademarks
– iPad and iPhone are trademarks of Apple Inc., registered in the U.S.and other countries. – Android is a trademark of Google LLC.
– ONVIF is a trademark of ONVIF, Inc.
– All other trademarks identified herein are the property of their respective owners
©i-PRO Co., Ltd All rights reserved / March 2023


Data Sheet

A&E Spec Sheet


Installation Guide

User Manual/Operating Instruction



WV-S8574L etc. Firmware

WV-S8574L etc. Firmware

Latest version 2.60  NTSC/PAL

[Read before upgrading to V2.50 or later]
Upgrading firmware from V2.40 or eariler to V2.50 or later needs an intermediate firmware V2.49.
Refer to Firmware 2-step upgrade from V2.40 or earlier to V2.50 or later for details and procedures.

Release Note


Image Data

CAD Data

BIM Data



Building information models (BIMs) files
Files can be opened in Revit 2020 or newer


Certificate of Compliance