During kitting, got an error message "An error was detected in the installation status. Please recheck the installation status of this machine and turn on the power again."
- Network Cameras
- Installation/Configuration
Since this error message is related to the installation status, you can continue working even if it appears during kitting.
Among the products for hanging installation, there are products that detect the posture at the time of installation.
When the power is turned on while it is stored sideways in the packing box (when performing the kitting work)
The camera will detect your posture and display an error message.
The camera is not installed, so no special action is required.
Please continue working.
Note:
Do not change the direction of the packing box. When the direction of the packing box is changed and the stored camera is suspended
PTZ operation is performed during kitting, which may put an extra load on the camera.
| This article applies to: |
| WV-X6533L, N WV-S6532LN, WV-S65340 series |
Article number：apac-en123801
Last updated：June 16, 2025
Was this article helpful?
Thank you for your feedback!