The live images are not displayed smoothly when displaying 16-screen camera live images on WV-ASM300.
- Management Software(ASM)
- Troubleshooting
Problem Description
The camera is connected to the recorder, and the recorder is registered in WV-ASM300.
For 16-screen display, if the resolution is SXVGA or higher, images will be displayed at an interval of the refresh cycle. Set the resolution to less than SXVGA (1280 x 960) .
If the resolution exceeds the full frame rate that can be displayed on a 16-screen, only I-pictures will be displayed and the live image will not be displayed smoothly.
For details, please refer to the following manual.
WV-ASM300 Operating Instructions
Chapter : 1.9.2. Restrictions
There are two ways to make the displayed image smoother.
- In the “Camera setup” window, set “Live image source” to “Camera” and “Stream type” to “AUTO”.
- Set the resolution of stream 1 received by the recorder to a resolution smaller than SXGA.
Article number：apac-en123531
Last updated：June 13, 2025
Was this article helpful?
Thank you for your feedback!