Input alarm for Milestone
Last update: Sep, 2024
Input alarm(Terminal alarm) setting to Milestone Xprotect.
<Milestone setting>
1. Enable "Input 1". when registering the camera.
Refer to the camera registration page for details on camera registration.
2. Select the target device and select "Input1". Select [Event] and click "Add" .
Select "Input Rising event" and click "OK".
Click save.
3. Setup [Rules and Events].
This step is the same as a step in the AI-VMD process. Please refer to the AI-VMD page from steps 4 to 13.
In this step, select "Device" - "Input Activated" as the Event.
4. Select [Alarm] - [Alarm Definition].
Right-click on "Alarm definitions" and select "Add New" to create one.
Select the following item in the Trigger field and save.
・Triggering event:"System Events" - "Input Activated"
・Sources:Select the target camera or "All input"
<Comfirmation of XProtect Smart Client>
1. After the alarm occurs, check the Alarm Manager tab in Xprotect Smart Client.
The message field will display "Input Activated"
Milestone XProtect Management Client 2024 R1 /DP 13.2a