Telecamere Bullet/Box

WV-S1511LN i-PRO

HD Outdoor Bullet Network Camera

DISCONTINUED PRODUCT

  • HD 720p 60fps
  • iA (intelligent Auto)
  • Extreme Super Dynamic 144dB
  • Color night vision (0.0005 to 0.008 lx)
  • H.265 Smart Coding
  • ClearSight Coating
  • i-VMD License Bundled
  • NDAA Compliant

This HD (1,280 x 720) Fixed Box Network Camera is based on the concept of "i-PRO EXTREME".


• Extreme Super Dynamic technologies deliver 144 dB wide dynamic range.

• Intelligent Auto (iA) feature provides increased discernibility even in environments with poor visibility.

• High sensitivity with Day/Night (ICR*) function : 0.008 lx (Color), 0.004 lx (B/W) at F1.6
 *ICR : IR Cut filter Removal

• H.265 compression and Smart coding technology realize high image quality streaming at low bit rates.

• Intelligent Face Compression provides high picture quality at “Face best shot area” while reducing other non-important areas to save the network bandwidth and the disk space of recorder.

• Encryption and alteration detection functions enhanced the security.

• ClearSight Coating is a special coating applied to the surface of the transparent cover that makes it difficult for water droplets to adhere to the lens cover.

• The Easy Kitting Package makes setting camera easy.

Camera

COMPONENT SPECIFICATION
Image Sensor Approx. 1/3 type MOS image sensor
Minimum Illumination Color : 0.008 lx, BW : 0.004 lx
(F1.6, Maximum shutter : Off (1/30s), AGC : 11)
BW : 0 lx
(F1.6, Maximum shutter : Off (1/30 s), AGC : 11, when the IR LED is lit)
Color : 0.0005 lx, BW : 0.0003 lx
(F1.6, Maximum shutter : max. 16/30s, AGC : 11)
White Balance AWC (2,000 - 10,000 K), ATW1 (2,700 - 6,000 K), ATW2 (2,000 - 6,000 K)
Shutter Speed 1/30 Fix to 1/10000 Fix
*1/30 Fix to 2/120 Fix is available during 30 fps mode only.
*1/60 Fix is available during 60 fps mode only.
Intelligent Auto On / Off
Super Dynamic On / Off, The level can be set in the range of 0 to 31.
Dynamic Range 144 dB (Super Dynamic : On)
Adaptive Black Stretch The level can be set in the range of 0 to 255.
Back Light Compensation/High Light Compensation BLC (Back light compensation) / HLC (High light compensation) / Off
(only when Super dynamic / Intelligent Auto : Off)
Fog Compensation On / Off (only when Intelligent auto / auto contrast adjust : Off)
Maximum Gain The level can be set in the range of 0 to 11.
Color/BW (ICR) Off / On(IR Light Off) / On(IR Light On) / Auto1(IR Light Off) /
Auto2(IR Light On) / Auto3(SCC)
IR LED Light High/ Middle/ Low/ Off
Maximum irradiation distance: 40 m {Approx. 131 ft}
Digital Noise Reduction The level can be set in the range of 0 to 255.
Video Motion Detection (VMD) On / Off, 4 areas available
Intelligent VMD (i-VMD) Type 4 *Bundled License
Stabilizer On / Off (available only in the 30 fps mode)
Privacy Zone On / Off (up to 8 zones available)
Image Rotation 0 ° / 90 ° / 180 ° / 270 °
Camera Title (OSD) On / Off Up to 20 characters (alphanumeric characters, marks)
Focus Adjustment Auto back focus / Manual

Lens

COMPONENT SPECIFICATION
Focal length 2.8 - 10 mm {1/8 inches - 13/32 inches}
Zoom Ratio 3.6 x (Motorized zoom / Motorized focus)
Angular Field of View [16 : 9 mode] Horizontal : 31° (TELE) – 112° (WIDE)
Vertical : 17° (TELE) – 60° (WIDE)
[4 : 3 mode] Horizontal : 26° (TELE) – 91° (WIDE)
Vertical : 19° (TELE) – 67° (WIDE)
Maximum Aperture Ratio 1 : 1.6 (WIDE) – 1 : 3.4 (TELE)
Focus range 0.3 m {11-13/16 inches} – ∞

Adjusting Angle

COMPONENT SPECIFICATION
Ceiling mounting Horizontal : ±180 ° (Adjust by horizontal (PAN) angle)
Vertical : 0 ° to 100 ° (Adjust by vertical (TILT) angle)
Yaw : –190 ° to +100 ° (Adjust by azimuth (YAW) angle)
Wall mounting Horizontal : ±100 ° (Adjust by vertical (TILT) angle)*
Vertical : ±100 ° (Adjust by vertical (TILT) angle)*
Yaw : –190 ° to +100 ° (YAW) rotation part)
*You can change between horizontal and vertical angels by adjusting
the PAN rotation part.

Browser GUI

COMPONENT SPECIFICATION
Camera Control Brightness, AUX On / Off
Audio Mic (Line) Input : On / Off Volume adjustment : Low / Middle / High
Audio Output : On / Off Volume adjustment : Low / Middle / High
GUI / Setup Menu Language English, Italian, French, German, Spanish, Portuguese, Russian, Chinese, Japanese
Browser Microsoft Edge, Firefox, Google Chrome

Network

COMPONENT SPECIFICATION
Network IF 10Base-T / 100Base-TX, RJ45 connector
Resolution H.265/ H.264/ JPEG (MJPEG) •1.3 mega pixel [16 : 9] (30/60 fps)
1,280 x 720 / 640 x 360 / 320 x 180
•1.3 mega pixel [4 : 3] (30 fps)
1,280 x 960 / 800 x 600 / 640 x 480 / 400 x 300 / 320 x 240
H.265/H.264 [Transmission Mode]
Constant bit rate / VBR / Frame rate / Best effort
[Transmission Type]
Unicast / Multicast
JPEG [Image Quality]
10 steps
Smart Coding Smart Facial Coding : On (Smart Facial Coding*) / On (Auto VIQS) / Off
*Smart Facial Coding is only available with Stream(1).
GOP (Group of pictures) : On (Advanced)* / On (Mid) / On (Low) / Off
*On(Advanced) is only available with H.265.
Audio Compression G.726 (ADPCM) : 16 kbps / 32 kbps,
G.711 : 64 kbps,
AAC-LC : 64 kbps / 96 kbps / 128 kbps
Audio Transmission Mode Off / Mic (Line) input / Audio output / Interactive (Half duplex) /
Interactive (Full duplex)
Supported Protocol IPv6 : TCP/IP, UDP/IP, HTTP, HTTPS, RTP, FTP, SMTP, DNS, NTP,
SNMP, DHCPv6, MLD, ICMP, ARP, IEEE 802.1X, DiffServ, SRTP, MQTT, LLDP
IPv4 : TCP/IP, UDP/IP, HTTP, HTTPS, RTSP, RTP, RTP/RTCP, FTP,
SMTP, DHCP, DNS, DDNS, NTP, SNMP, UPnP, IGMP, ICMP,
ARP, IEEE 802.1X, DiffServ, SRTP, MQTT, LLDP
No. of Simultaneous Users Up to 14 users (Depends on network conditions)
SDXC/SDHC/SD Memory Card H.265 / H.264 recording :
Manual REC / Alarm REC (Pre/Post) / Schedule REC /Backup upon network failure
JPEG recording :
Manual REC / Alarm REC (Pre/Post) / Backup upon network failure
Compatible SDXC/SDHC/SD Memory Card :
Panasonic 2 GB, 4 GB*, 8 GB*, 16 GB*, 32 GB*, 64 GB**, 128 GB**, 256 GB** model
*SDHC card, ** SDXC card (except miniSD card and microSD card)
Mobile Terminal Compatibility iPad, iPhone, AndroidTM mobile terminals

Alarm

COMPONENT SPECIFICATION
Alarm Source 3 terminals input, VMD alarm, Command alarm, Audio detection alarm
Alarm Actions SDXC/SDHC/SD memory recording, E-mail notification,
HTTP alarm notification Indication on browser, FTP image transfer,
Panasonic alarm protocol output

Input/Output

COMPONENT SPECIFICATION
Monitor Output (for Adjustment) VBS : 1.0 V [p-p] / 75 Ω, composite, Pin jack
An NTSC or PAL signal can be outputted from camera
Audio input ø3.5 mm stereo mini jack
Input impedance: Approx. 2 kΩ (unbalanced)
(Applicable microphone : Plug-in power type)
Supply voltage : 2.5 V ±0.5 V
Audio Output ø3.5 mm stereo mini jack (monaural output)
Output impedance : Approx. 600 Ω (unbalanced)
External I/O Terminals ALARM IN1(Alarm input 1/ Black & white input/ Auto time adjustment input),
ALARM IN2(Alarm input 2/ ALARM OUT), ALARM IN3(Alarm input 3/ AUX OUT) (x1 for each)

General

COMPONENT SPECIFICATION
Safety UL (UL60950-1), c-UL (CSA C22.2 No.60950-1), CE, IEC60950-1
EMC FCC (Part15 ClassA), ICES003 ClassA, EN55032 ClassB, EN55024
Power Source and Power Consumption DC power supply : DC12 V 750 mA, Approx. 9.0 W
PoE (IEEE802.3af compliant) Device :
DC48 V 195 mA, Approx. 9.4 W (Class 0 device)
Ambient Operating Temperature IR LED : -40 °C to +50 °C (-40 °F to 122 °F), IR LED : Off-40 °C to +60 °C (-40 °F to 140 °F)
(Power On range : –30 °C to +60 °C {–22 °F to +140 °F})
Ambient Operating Humidity 10 to 100 % (no condensation)
Water and Dust Resistance IP66 (IEC60529), measuring standard compatible,
Type 4X (UL50), NEMA 4X compliant
Shock Resistance IK10 (IEC 62262)
Dimensions *Installing using the base bracket 130 mm (W) x 130 mm (H) x 337 mm (L)
{5-1/8 inches (W) x 5-1/8 inches (H) x 13-9/32 inches (L)}
Mass (approx.) Approx. 1.6 kg {3.53 lbs} When using the adapter box : Approx. 2.1 kg {4.63 lbs}
Finish Main body : Almium die cast, Metallic silver
Front cover section clear part : Polycarbonate resin (with ClearSight coating)

NOTES

Important
– Safety Precautions : Carefully read the Basic Information,Installation Guide and Operating Instructions before using this product.
– i-PRO Co., Ltd. cannot be held responsible for the performance of the network and/or other manufacturers' products used on the network.
– Masses and dimensions are approximate.
– Specifications are subject to change without notice.
Trademarks and registered trademarks
– iPad and iPhone are trademarks of Apple Inc., registered in the U.S.and other countries. – Android is a trademark of Google LLC.
– ONVIF is a trademark of ONVIF, Inc.
– All other trademarks identified herein are the property of their respective owners
©i-PRO Co., Ltd All rights reserved / November 2022

Specifications

Data Sheet

A&E Spec Sheet

Manuals

Installation Guide

User Manual/Operating Instruction

Firmware/Software

Firmware

WV-S1132 etc. Firmware

WV-S1132 etc. Firmware

NTSC/PAL
   How to upgrade firmware in 2 steps.
   (Click here for detail)

  • In case of firmware updating from 1.xx/2.00 to 4.10(or later), you have to upgrade version 4.00/4.01/4.02 once, then upgrade 4.10 (or later).

Please note that downloading service for the file of firmware version 4.00/4.01 are unavailable.
We apologize for any inconvenience this may cause.
 

Release Note

Image/CAD/BIM

Image Data

CAD Data

BIM Data

WV-S15x1LN BIM

WV-S15x1LN BIM

Building information models (BIMs) files

Certification

Certificate of Compliance

Other

Technical Document

How to firmware two-stage version up

How to firmware two-stage version up

How to upgrade firmware version 2.00 (or newer) in 2 steps and/or version 4.10 (or newer).

Close