2.Connect to the camera

2.1i-PRO Configuration Tool (iCT)

This is a tool for managing the image monitoring system at a glance.

For more information about i-PRO Configuration Tool (iCT), see the following.
→Click here for more information about i-PRO Configuration Tool

2.2IP Setting Software

Cameras or recorders on the same network can be automatically detected and set up in the network.

Refer to the following for details on the IP Setting Software.
→Click here for more information on the IP Setting Software

2.3Access the camera

1.

Launch a IP Setting Software

・

The model number and MAC address of the detected camera are displayed.

・

The default for [Network Settings] is [DHCP].

・If you cannot obtain an IP address from the DHCP server, set the IP address to 192.168.0.10.

2.

Double-click on the camera's IP address

・

The browser starts and the administrator registration screen is displayed.

・

You need to register as an administrator.

3.

Enter administrator username and password

・

The screen for setting the language and date and time is displayed.

4.

Set the language, date and time, and screen

・

You can set the language and date and time and change the background color of the screen and the layout of the operation panel.

5.

Press [Set]

・

Live image pages is displayed.

2.4About Live image pages

①

Camera title

②

SD Storage Status Display

③

Stream information display

④

Snapshot button

⑤

Stream selection display button

⑥

Before/after image comparison switching button

⑦

Support button

⑧

Full Screen View button

⑨

Grid view button

⑩

Camera control panel display button

⑪

[Setup] buttons (Settings panel display button)

⑫

Select Streams-[Live only] pull-down menu

⑬

Select Streams-[Refresh Rate] pull-down menu

⑭

Select Stream-Display Stream Information

⑮

Main area

⑯

Camera Control Panel-SD Memory Card-[Log/Play]

⑰

Alarm notification

⑱

Camera Control Panel-SD Memory Card-[Rec. on SD]

⑲

Camera Control Panel-[Mic input volume (Camera to PC)]

⑳

Camera Control Panel-[Brightness]

㉑

Camera control panel - [Audio output volume (PC to Camera)]

㉒

Frame rate/bit rate display button