4.Clean up

・Turn off the power before starting operation. Doing so may result in injury.

・Do not apply or use organic solvents such as benzene and thinner. The front part may become discolored. Follow the precautionary statement when using chemical foil.

・Do not loosen or remove the screws not specified in the operation manual.

・Clean with lens cleaning paper (for cleaning cameras and eyeglasses).

・Alcohols should be used when solvents are used. Do not use glass cleaners or thinners.

・To clean the front panel, wash out hard sand grains and other adhered materials by pouring fresh water containing no lubricant or silicone substance using a hose or spray. If the stain is not removed, wipe with a soft sponge soaked with the above fresh water.

・Do not wipe dry (e.g., spread oil on surfaces or damage the advanced ClearSight Coating).

・Use neutral detergent for dishware and rinse thoroughly after use if dirt does not come off after wiping. If detergents other than neutral (weakly alkaline or slightly acidic) are used, the hydrophilic capacity of the product may deteriorate or the surface coating may peel off.

・Do not use organic solvents such as benzene and thinner.

・If spraying is used, use it after emptying to remove the initial impurities.

・If the Advanced ClearSight Coating on the front panel becomes ineffective due to improper maintenance, the front panel needs to be replaced (paid) to restore the Advanced ClearSight Coating to its original state. Contact your dealer or contractor.