2.Preparation

The following outlines the work flow up to operation. This chapter describes ① and ②. (If you cannot select [AI On-site Learning] from [Extension Software] on the Settings screen, use your browser.)

①

Check that the product and AI Video Motion Detection are installed.
→2.1　Checking the product and AI Video Motion Detection are installed.

②

Install the product and AI Video Motion Detection
→2.2　Installing the product
　2.3　Installing AI Video Motion Detection

③

Configure the required settings.
→3.　Basic Settings
→4.　Advanced Settings

④

Start of operations.

2.1Checking the product and AI Video Motion Detection are installed.

Follow the procedure below to make sure that this product and AI Video Motion Detection are installed on the camera.

1.

Click the iCT submenu [App. Installation/Update].

2.

Select the camera you want to check.

3.

Enter the following items on the settings screen.

-

[Extension software]: [AI On-site Learning]

4.

Check that the [AI On-site Learning] version is displayed.

-

If the version is not displayed, the product is not installed. See the following to install the product.
→2.2　Installing the product

5.

Enter the following items on the settings screen.

-

[Extension software]: Select [AI Video Motion Detection].

6.

Check that the version information of AI Video Motion Detection is displayed.

-

If the version is displayed, see the following to set up the product.
→3.　Basic Settings

-

If the version is not displayed, AI Video Motion Detection is not installed. See the following to install AI Video Motion Detection.
→2.3　Installing AI Video Motion Detection

2.2Installing the product

Follow the steps below to download the product and install it on your camera.

1.

Access the download site for our products and download the AI On-site Learning application.

See the following for the download site of this product.
→Downloads

Do not enter any spaces or double-byte characters in the name of the destination directory.

2.

Click the iCT submenu [App. Installation/Update].

3.

Select the camera on which the application is installed and check that the product number, other information, and device ID number are displayed.

4.

Enter the following items on the settings screen.

-

[Extension software]: Select [AI On-site Learning]

-

[Folder] : Specify the location of the extension software you downloades in (1).

5.

Click [Confirm]

A confirmation screen is displayed.

6.

Check the following on the confirmation screen.

-

The camera you want to use is selected.

-

The version of the application you want to register/update.

7.

Click [Start]

The progress screen is displayed.

8.

Check that the installation is completed successfully.

・Do not turn off the camera during installation.

・Do not perform any operations during installation..

・If the installation fails, check the error in the message field.

・If you cannot open the settings screen normally immediately after installation, restart the camera.

2.3Installing AI Video Motion Detection

1.

Access the download site for our products and download AI Video Motion Detection.

For more information on AI Video Motion Detection, see the following URL.
→AI Video Motion Detection

Do not enter any spaces or double-byte characters in the name of the destination directory.

2.

Click the iCT submenu [App. Installation/Update]

3.

Select the camera on which the application is installed and check that the product number, other information, and device ID number are displayed.

4.

Enter the following items on the settings screen.

-

[Extension software]: Select [AI Video Motion Detection]

-

[Folder] : Specify the location of downloaded AI Video Motion Detection you downloaded in (1).

5.

Click [Confirm]

A confirmation screen is displayed.

6.

Check the following on the confirmation screen.

-

The camera you want to use is selected.

-

The version of the application you want to register/update.

7.

Click [Start]

The progress screen is displayed.

8.

Check that the installation is completed successfully.

・Do not turn off the camera during installation.

・Do not perform any operations during installation.

・If the installation fails, check the error in the message field.

・If you cannot open the settings screen normally immediately after installation, restart the camera.

2.4Select how to configure this product

The following process is involved in the setup of this product.

You can choose from the following configuration methods. Please refer to the appropriate chapter.


Setup method	Usage scene	Reference
All processes are carried out in a camera connection environment (e.g., where the camera is installed)	All processes are to be carried out on site to allow sufficient time for on-site work	3.　Basic Settings 4.　Advanced Settings
[Image acquisition] and [Upload and confirmation of detection results] should be implemented in the camera connection environment and [AI On-site Learning setting] should be implemented in the camera unconnected environment (office, home, etc.)	The time required to work on-site is limited and time-consuming processes should be carried out in the office or at home, etc.	7.1　Perform some processes in non-camera environment