When false detections or missed detections occur with i‑PRO Security Radar, the following causes are commonly considered. Please review the applicable items according to your usage conditions.

1. Interference between multiple radars

When multiple i‑PRO Security Radars are installed in close proximity, overlapping detection areas may cause interference between radars, which can result in false detections or missed detections.

In such cases, enabling the Radio Interference Avoidance setting may help improve the situation.

For details, please refer to:
Is it possible to install i‑PRO Security Radars with overlapping detection areas in order to reduce blind spots?

2. Impact of detection sensitivity and filter settings

If the [Detection Sensitivity] or [Fluctuation Filter Strength] is not appropriate for the installation environment, targets may become difficult to detect or detection performance may degrade.

For details, please refer to:
In Security Radar, false detections are occurring. What should I check and how can I address this?

3. Impact of alarm settings and PTZ linkage conditions

Even when a target object is detected by the radar, alarms may not be triggered depending on the alarm conditions or the linkage settings with a PTZ camera.

For details, please refer to:
In Security Radar, false alarms are occurring. What should I check and how can I address this?

4. Impact of installation environment and external factors

Depending on the surrounding environment and installation conditions, the detection range and accuracy of the Security Radar may be affected.

For details, please refer to:
What environmental factors can affect the detection range and accuracy of security radar?

Notes

If you could not find an answer above, further investigation based on your specific usage environment may be required. In such cases, please contact us using the inquiry form below.
Contact Us