WV-SPN310 i-PRO
Fixed Box network camera
DISCONTINUED PRODUCT
Super Dynamic HD Network Camera
Successor model : WV-SPN310A
CARACTÉRISTIQUE CLÉ
CARACTÉRISTIQUES
BASE DE DONNÉES DOCUMENTAIRES
PRODUITS CONNEXES
• 720p HD images up to 60 fps*1
• Enhanced Super Dynamic*1 and ABS (Adaptive Black Stretch) technologies deliver 133 dB wider dynamic range compared to conventional cameras.
• Multi process NR & 3D-DNR ensures noise reduction in various conditions.
• Face Super Dynamic technology ensures clear face image.
• Face detection function detects the position of human face and the information is sent by XML or video stream. (Extension Software)
• Can be added new intelligent extension software in addition to built-in VMD (Video Motion Detection), alarm function.
• Fog compensation function equipped as standard.
• Supports SSL, DDNS (viewnetcam, RFC2136)
• HLC (High Light Compensation) :
If a bright light source such as car headlights points in the direction of a camera, the camera corrects for strong lights and their surroundings to provide clear images of the areas.
*1 Super Dynamic function is automatically set off on 60 fps mode
Camera
COMPONENT | SPECIFICATION |
---|---|
Image Sensor | Approx. 1/3 type MOS image sensor, Built-in primary color lter |
Effective Pixels | Approx. 1.3 mega pixels |
Scanning Mode | Progressive scan |
Scanning Area | 5.38 mm (H) x 3.02 mm (V) {7/32 inches(H) x 1/8 inches(V) } |
Minimum Illumination | Color : 0.01lx, BW : 0.008 lx (F1.4, Maximum shutter : Max. : Off(1/30s),Gain : On(High)) Color : 0.0007 lx, BW : 0.0005 lx (F1.4, Maximum shutter : Max.16/30s,Gain : On(High)) |
White Balance | AWC (2,000 - 10,000 K), ATW1 (2,700 - 6,000 K), ATW2 (2,000 - 6,000 K) |
Light Control Mode | Outdoor scene / Indoor scene (50 Hz) / Indoor scene (60 Hz) / ELC / Fix shutter |
Shutter Speed | 1.3 mega pixel [16 : 9] (60 fps mode)] OFF(1/60), 1/100, 1/120, 1/250, 1/500, 1/1000, 1/2000, 1/4000,1/10000 Other than [1.3 mega pixel [16 : 9] (60 fps mode)] OFF(1/30), 3/100, 3/120, 2/100, 2/120, 1/100, 1/120, 1/250,1/500, 1/1000, 1/2000, 1/4000, 1/10000 |
Super Dynamic | On (High) / On (Normal) / Off |
Face Super Dynamic | On / Off (only when Super Dynamic : On) |
Adaptive Black Stretch | On / Off (only when Super Dynamic : Off) |
Fog compensation | On / Off (only when Super Dynamic / Adaptive black stretch : Off) |
High light compensation(HLC) | On / Off (only when Super Dynamic / Back light compensation : Off) |
AGC | On (Low) / On (Mid) / On (High) / Off |
Maximum shutter | max. 1/1000 s, max. 1/500 s, max. 1/250 s, max. 1/120 s, max. 2/120 s, max. 1/100 s, max. 2/100 s, max. 1/60 s, max. 1/30 s, max. 2/30 s, max. 4/30 s, max. 6/30 s, max. 10/30 s, max. 16/30 s |
Day & Night (Electrical) | On/Off |
Dynamic Range | 133 dB typ. (Super Dynamic : On) |
Digital Noise Reduction | High / Low |
Video Motion Detection | On / Off, 4 areas, Sensitivity : 15 steps, Detection size : 10 steps |
Privacy Zone | On / Off (up to 8 zones available) |
VIQS | On / Off (up to 8 zones available) |
Camera Title (OSD) | On / Off, Up to 20 characters (alphanumeric characters, marks) |
Browser GUI
COMPONENT | SPECIFICATION |
---|---|
Cropping | Off / JPEG(1) / JPEG(2) / JPEG(3) / H.264(1) / H.264(2) / H.264(3) / H.264(4) / H.264(all) Alarm action : On/Off Up to 4 image capture areas can be specied |
Camera Control | Brightness, AUX On / Off |
Display Mode | Spot, Quad : Image from 16 cameras can be displayed in 4 different Quad screens or 16 split screen (JPEG only). 20 characters camera title available. |
Digital Zoom | 1x, 2x, 4x controlled by browser GUI |
Clock Display | Time : 12H/24H, Date : 5 formats on the browser, Summer time (Manual) |
Alarm Control | Reset |
One Shot Capture | A still picture will be displayed on a newly opened window. |
Audio | Mic (Line) Input: ON / OFF Volume adjustment: Low / Middle / High, Audio Output: ON / OFF Volume adjustment: Low / Middle / High |
SD Memory Data Download | Still or motion Images recorded in the SDHC/SD memory card can be downloaded. |
GUI / Setup Menu Language | English, Italian, French, German, Spanish, Portuguese, Russian, Chinese, Japanese |
System Log | Up to 100 (Internal) Up to 4,000 (SDXC/SDHC/SD memory when the recording format is set to JPEG.) error logs |
Supported OS | Microsoft® Windows® 8.1, Microsoft® Windows® 8, Microsoft® Windows® 7, Microsoft® Windows Vista® |
Supported Browser | Windows® Internet Explorer® 11 (32-bit) Windows® Internet Explorer® 10 (32-bit) Windows® Internet Explorer® 9 (32-bit) Windows® Internet Explorer® 8 (32-bit) Windows® Internet Explorer® 7 (32-bit) |
Network
COMPONENT | SPECIFICATION |
---|---|
Network IF | 10Base-T / 100Base-TX, RJ45 connector |
Image Resolution | •1.3 mega pixel [16 : 9] (30/60 fps) 1,280 x 720 / 640 x 360 / 320 x 180 / 160 x 90 •1.3 mega pixel [4 : 3] (30 fps) 1,280 x 960 / 800 x 600 / 640 x 480 / 400 x 300 / 320 x 240 / 160 x 120 |
H.264 | [Transmission Mode] Constant bit rate / Variable bit rate / Framerate priority / Best effort / Advanced VBR [Frame Rate] 1 / 3 / 5 / 7.5 / 10 / 12 / 15 / 20 / 30 / 60 fps [Bit Rate/Client] 64 / 128 / 256 / 384 / 512 / 768 / 1,024 / 1,536 / 2,048 / 3,072 / 4,096 / 6,144 / 8,192 / 10,240 / 12,288 / 14,336 / 16,384 / 20,480 / 24,576 / 30,720 / 40,960 kbps [Image Quality] Constant bit rate, Best effort : Low (Motion priority) / Normal / Fine (Image quality priority) VBR : 0 Super ne / 1 Fine / 2 / 3 / 4 / 5 Normal / 6 / 7 / 8 / 9 Low [Refresh Interval] 0.2 / 0.25 / 0.33 / 0.5 / 1 / 2 / 3 / 4 / 5s [Transmission Type] UNICAST / MULTICAST |
JPEG | [Image Quality] 10 steps [Refresh Intervaly] 0.1 fps - 30 fps (JPEG frame rate will be restricted when displaying both JPEG and H.264 images.) [Transmission Type] PULL / PUSH |
Audio Compression | G.726 (ADPCM) 32 kbps / 16 kbps, G.711 64 kbps / AAC-LC |
Audio Mode | Off / Mic (Line) input / Audio output / Interactive (Half duplex) / Interactive (Full duplex) |
Bandwidth control | 64 / 128 / 256 / 384 / 512 / 768 / 1,024 / 2,048 / 4,096 / 8,192 kbps / Unlimited |
Supported Protocol | IPv6 : TCP/IP, UDP/IP, HTTP, HTTPS, FTP, SMTP, DNS, NTP, SNMP, DHCPv6, RTP, MLD, ICMP, ARP IPv4 : TCP/IP, UDP/IP, HTTP, HTTPS, RTSP, RTP, RTP/RTCP,FTP, SMTP, DHCP, DNS, DDNS, NTP, SNMP, UPnP, IGMP, ICMP, ARP |
FTP Client | Alarm image transmission, FTP periodic transmission (When the FTP transmission is failed, backup on an optional SDXC/SDHC/SD memory card is available.) |
No. of Simultaneous Users | Up to 14 users (Depends on network conditions) |
SDXC/SDHC/SD Memory Card (Option) * Manufactured by Panasonic (SD speed class 4 or higher) * Use the SD memory card that complies with UHS-1 (Ultra High Speed-1) in the case of SD Speed Class 10 | H.264 recording : Manual REC / Alarm REC (Pre/Post) / Schedule REC / Backup upon network failure Compatible JPEG recording : Manual REC / Alarm REC (Pre/Post) / Backup upon network failure Compatible SD (SDHC/SDXC) card: Panasonic 2 GB, 4 GB*, 8 GB*, 16 GB*, 32 GB*, 64GB** model *SDHC card, ** SDXC card (except miniSD card and microSD card) |
Cellular Phone Compatibility | JPEG image, AUX control (by access level) |
Mobile Terminal Compatibility | iPad, iPhone, iPod touch (iOS 4.2.1 or later), AndroidTM Terminal |
Alarm
COMPONENT | SPECIFICATION |
---|---|
Alarm Source | 3 terminals input, VMD, Command alarm, Audio detection alarm |
Alarm Actions | SDXC/SDHC/SD memory recording, E-mail notication, HTTP alarm notication Indication on browser, FTP image transfer, Panasonic protocol output |
Alarm Log | With SDXC/SDHC/SD memory card : Up to 50,000 logs for each SD memory card |
Schedule
COMPONENT | SPECIFICATION |
---|---|
Schedule mode | Alarm permission / VMD permission / Access permission / H.264 recording / Audio detection permission / Scene le / FTP periodic image transmission |
Input/Output
COMPONENT | SPECIFICATION |
---|---|
Monitor Output (for Adjustment) | VBS: 1.0 V [p-p] / 75 Ω, composite, RCA jack An NTSC or PAL signal can be outputted from camera. (use the selector switch or software to select either NTSC or PAL signal). |
Built-in microphone | Electret condenser microphone |
External I/O Terminals | ALARM IN 1, ALARM IN 2 (ALARM OUT), ALARM IN 3 (AUX OUT) |
General
COMPONENT | SPECIFICATION |
---|---|
Safety | UL (UL60950-1), C-UL (CAN/CSA C22.2 No.60950-1), CE, IEC60950-1 |
EMS | FCC (Part15 ClassA), ICES-003 ClassA, EN 55032 ClassB, EN55024 |
Power Source and Power Consumption | DC 12 V : 310 mA / Approx. 3.8 W PoE DC 48 V : 120 mA / Approx. 5.8 W (Class 2 device |
Ambient Operating Temperature | -10°C to +50°C (14 °F to 122 °F) |
Ambient Operating Humidity | 20 ~ 90 % (no condensation) |
Dimensions | 75.0 mm (W) x 57.0 mm (H) x 143.5 mm (D) {2-15/16 inches (W) x 2-1/4 inches (H) x 5-21/32 inches (D)} (excluding lens / power cord plug) |
Mass (approx.) excluding lens | Approx. 370 g {0.82 lbs} |
Finish | Main body : PC/ABS resin (Sail white) |
Specifications
Data Sheet
WV-SPN311, SPN310 Spec Sheet (Global)
No.2A-132, A4 Size
WV-SPN311, SPN310 Spec Sheet (US)
No.2A-132, Letter Size
A&E Spec Sheet
Manuals
Installation Guide
User Manual/Operating Instruction
Firmware/Software
Firmware
NTSC/PAL
How to upgrade firmware in 2 steps.
(Click here for detail)
-
In case of firmware updating from 1.xx to 2.xx, you have to upgrade version 9.99 once, then upgrade 2.xx. Also for upgarding from 2.xx to 4.10 (or earlier), you have to upgrade version 4.00 once, then upgrade 4.10 (or later).
-
Please click here to request the firmware version 9.99 as providing the firmware is on request only; complete the form with the model number of your camera and "Request firmware version 9.99", then click "Submit" button.
Please clear the cache memory or access with another internet browser if you cannot access the form.
- Important information about backing up/restoring the settings data of camera firmware ver 1.71 or older (Click here for detail)
WV-SPN311, SPN310 Firmware (Chinese)
Chinese
How to upgrade firmware in 2 steps.
(Click here for detail)
-
In case of firmware updating from 1.xx to 2.xx, you have to upgrade version 9.99 once, then upgrade 2.xx. Also for upgarding from 2.xx to 4.10 (or earlier), you have to upgrade version 4.00 once, then upgrade 4.10 (or later).
-
Please click here to request the firmware version 9.99 as providing the firmware is on request only; complete the form with the model number of your camera and "Request firmware version 9.99", then click "Submit" button.
Please clear the cache memory or access with another internet browser if you cannot access the form.
- Important information about backing up/restoring the settings data of camera firmware ver 1.71 or older (Click here for detail)
Release Note
Image/CAD/BIM
Image Data
CAD Data
Other
Technical Document
How to firmware two-stage version up
How to upgrade firmware version 2.00 (or newer) in 2 steps and/or version 4.10 (or newer).
WV-SFV631L, SFV611L etc. How to Upgrade (Ver1.71 or older)
WV-SW397, SFN311 etc. Addendum
WV-SW598, WV-SFN310 etc. Addendum
WV-SW598, WV-SFN310 etc. Addendum (Chinese)