1. Ana Sayfa
  2. WV-SPN311

Fixed Box Camera

WV-SPN311 i-PRO

Fixed Box network camera

DISCONTINUED PRODUCT

Super Dynamic HD Network Camera

Successor model : WV-SPN311A

• 720p HD images up to 60 fps*1
• Multiple H.264 (High profile) streams (max. 4 streams) and JPEG streams ensure simultaneous real time monitoring and high resolutionrecording.
• Enhanced Super Dynamic*1 and ABS (Adaptive Black Stretch) technologies deliver 133 dB wider dynamic range compared to conventional cameras.
• Multi process NR & 3D-DNR ensures noise reduction in various conditions.
• High sensitivity with Day & Night (IR) function : 0.01 lx (Color), 0.003 lx (B/W) at F1.4
• ABF (Auto Back Focus) ensures easy installation.
• Face Super Dynamic technology ensures clear face image.
• Face detection function detects the position of human face and the information is sent by XML or video stream. (Extension Software)
• Can be added new intelligent extension software in addition to built-in VMD (Video Motion Detection), alarm function.
• Fog compensation function equipped as standard.
• Super Chroma Compensation function realizes a better color reproducibility even in low illumination.
• Supports SSL, DDNS (viewnetcam, RFC2136)
• HLC (High Light Compensation) :
If a bright light source such as car headlights points in the direction of a camera, the camera corrects for strong lights and their surroundings to provide clear images of the areas.
*1 Super Dynamic function is automatically set off on 60 fps mode

Camera

COMPONENT SPECIFICATION
Image Sensor Approx. 1/3 type MOS image sensor, Built-in primary color lter
Effective Pixels Approx. 1.3 mega pixels
Scanning Mode Progressive scan
Scanning Area 5.38 mm (H) x 3.02 mm (V) {7/32 inches(H) x 1/8 inches(V) }
Minimum Illumination Color : 0.01 lx, BW : 0.003 lx (F1.4, Maximum shutter : Max. : Off(1/30s),Gain : On(High))
Color : 0.0007 lx, BW : 0.0002 lx (F1.4, Maximum shutter : Max.16/30s,Gain : On(High))
White Balance AWC (2,000 - 10,000 K), ATW1 (2,700 - 6,000 K), ATW2 (2,000 - 6,000 K)
Light Control Mode Outdoor scene / Indoor scene (50 Hz) / Indoor scene (60 Hz) / ELC / Fix shutter
Shutter Speed 1.3 mega pixel [16 : 9] (60 fps mode)]
OFF(1/60), 1/100, 1/120, 1/250, 1/500, 1/1000, 1/2000, 1/4000,1/10000
Other than [1.3 mega pixel [16 : 9] (60 fps mode)]
OFF(1/30), 3/100, 3/120, 2/100, 2/120, 1/100, 1/120, 1/250,1/500,
1/1000, 1/2000, 1/4000, 1/10000
Super Dynamic On (High) / On (Normal) / Off
Face Super Dynamic On / Off (only when Super Dynamic : On)
Adaptive Black Stretch On / Off (only when Super Dynamic : Off)
Fog compensation On / Off (only when Super Dynamic / Adaptive black stretch : Off)
High light compensation(HLC) On / Off (only when Super Dynamic / Back light compensation : Off)
AGC On (Low) / On (Mid) / On (High) / Off
Maximum shutter max. 1/1000 s, max. 1/500 s, max. 1/250 s, max. 1/120 s, max. 2/120 s,
max. 1/100 s, max. 2/100 s, max. 1/60 s, max. 1/30 s, max. 2/30 s,
max. 4/30 s, max. 6/30 s, max. 10/30 s, max. 16/30 s
Day & Night (IR) : Off/On / Auto1 (Normal) / Auto2 (IR Light) / Auto3 (SCC)
Dynamic Range 133 dB typ. (Super Dynamic : On)
Digital Noise Reduction High / Low
Video Motion Detection On / Off, 4 areas, Sensitivity : 15 steps, Detection size : 10 steps
Privacy Zone On / Off (up to 8 zones available)
VIQS On / Off (up to 8 zones available)
Camera Title (OSD) On / Off, Up to 20 characters (alphanumeric characters, marks)
Auto focus Auto/ Preset/ Fix

Browser GUI

COMPONENT SPECIFICATION
Cropping Off / JPEG(1) / JPEG(2) / JPEG(3) / H.264(1) / H.264(2) / H.264(3) / H.264(4) / H.264(all)
Alarm action : On/Off
Up to 4 image capture areas can be specied
Camera Control Brightness, AUX On / Off
Display Mode Spot, Quad : Image from 16 cameras can be displayed in 4 different Quad
screens or 16 split screen (JPEG only). 20 characters camera title available.
Digital Zoom 1x, 2x, 4x controlled by browser GUI
Clock Display Time : 12H/24H, Date : 5 formats on the browser, Summer time (Manual)
Alarm Control Reset
One Shot Capture A still picture will be displayed on a newly opened window.
Audio Mic (Line) Input: ON / OFF Volume adjustment: Low / Middle / High,
Audio Output: ON / OFF Volume adjustment: Low / Middle / High
SD Memory Data Download Still or motion Images recorded in the SDHC/SD memory
card can be downloaded.
GUI / Setup Menu Language English, Italian, French, German, Spanish, Portuguese, Russian, Chinese, Japanese
System Log Up to 100 (Internal)
Up to 4,000 (SDXC/SDHC/SD memory when the recording format is set to JPEG.) error logs
Supported OS Microsoft® Windows® 8.1, Microsoft® Windows® 8,
Microsoft® Windows® 7, Microsoft® Windows Vista®
Supported Browser Windows® Internet Explorer® 11 (32-bit)
Windows® Internet Explorer® 10 (32-bit)
Windows® Internet Explorer® 9 (32-bit)
Windows® Internet Explorer® 8 (32-bit)
Windows® Internet Explorer® 7 (32-bit)

Network

COMPONENT SPECIFICATION
Network IF 10Base-T / 100Base-TX, RJ45 connector
Image Resolution •1.3 mega pixel [16 : 9] (30/60 fps)
1,280 x 720 / 640 x 360 / 320 x 180 / 160 x 90
•1.3 mega pixel [4 : 3] (30 fps)
1,280 x 960 / 800 x 600 / 640 x 480 / 400 x 300 / 320 x 240 / 160 x 120
H.264 [Transmission Mode]
Constant bit rate / Variable bit rate / Framerate priority / Best effort / Advanced VBR
[Frame Rate]
1 / 3 / 5 / 7.5 / 10 / 12 / 15 / 20 / 30 / 60 fps
[Bit Rate/Client]
64 / 128 / 256 / 384 / 512 / 768 / 1,024 / 1,536 / 2,048 / 3,072 / 4,096 /
6,144 / 8,192 / 10,240 / 12,288 / 14,336 / 16,384 / 20,480 / 24,576 /
30,720 / 40,960 kbps
[Image Quality] Constant bit rate,
Best effort : Low (Motion priority) / Normal / Fine (Image quality priority)
VBR : 0 Super ne / 1 Fine / 2 / 3 / 4 / 5 Normal / 6 / 7 / 8 / 9 Low
[Refresh Interval]
0.2 / 0.25 / 0.33 / 0.5 / 1 / 2 / 3 / 4 / 5s
[Transmission Type]
UNICAST / MULTICAST
JPEG [Image Quality]
10 steps
[Refresh Intervaly]
0.1 fps - 30 fps
(JPEG frame rate will be restricted when displaying both JPEG and H.264 images.)
[Transmission Type]
PULL / PUSH
Audio Compression G.726 (ADPCM) 32 kbps / 16 kbps, G.711 64 kbps / AAC-LC
Audio Mode Off / Mic (Line) input / Audio output / Interactive (Half duplex) / Interactive (Full duplex)
Bandwidth control 64 / 128 / 256 / 384 / 512 / 768 / 1,024 / 2,048 / 4,096 /
8,192 kbps / Unlimited
Supported Protocol IPv6 : TCP/IP, UDP/IP, HTTP, HTTPS, FTP, SMTP, DNS, NTP, SNMP,
DHCPv6, RTP, MLD, ICMP, ARP
IPv4 : TCP/IP, UDP/IP, HTTP, HTTPS, RTSP, RTP, RTP/RTCP,FTP, SMTP,
DHCP, DNS, DDNS, NTP, SNMP, UPnP, IGMP, ICMP, ARP
FTP Client Alarm image transmission, FTP periodic transmission
(When the FTP transmission is failed, backup on an optional
SDXC/SDHC/SD memory card is available.)
No. of Simultaneous Users Up to 14 users (Depends on network conditions)
SDXC/SDHC/SD Memory Card (Option) * Manufactured by Panasonic (SD speed class 4 or higher) * Use the SD memory card that complies with UHS-1 (Ultra High Speed-1) in the case of SD Speed Class 10 H.264 recording : Manual REC / Alarm REC (Pre/Post) / Schedule REC /
Backup upon network failure Compatible
JPEG recording : Manual REC / Alarm REC (Pre/Post) /
Backup upon network failure Compatible
SD (SDHC/SDXC) card: Panasonic
2 GB, 4 GB*, 8 GB*, 16 GB*, 32 GB*, 64GB** model
*SDHC card, ** SDXC card (except miniSD card and microSD card)
Cellular Phone Compatibility JPEG image, AUX control (by access level)
Mobile Terminal Compatibility iPad, iPhone, iPod touch (iOS 4.2.1 or later), AndroidTM Terminal

Alarm

COMPONENT SPECIFICATION
Alarm Source 3 terminals input, VMD, Command alarm, Audio detection alarm
Alarm Actions SDXC/SDHC/SD memory recording, E-mail notication, HTTP alarm notication
Indication on browser, FTP image transfer, Panasonic protocol output
Alarm Log With SDXC/SDHC/SD memory card : Up to 50,000 logs for each SD memory card

Schedule

COMPONENT SPECIFICATION
Schedule mode Alarm permission / VMD permission / Access permission / H.264 recording /
Audio detection permission / Scene le / FTP periodic image transmission

Input/Output

COMPONENT SPECIFICATION
Monitor Output (for Adjustment) VBS: 1.0 V [p-p] / 75 Ω, composite, RCA jack
An NTSC or PAL signal can be outputted from camera.
(use the selector switch or software to select either NTSC or PAL signal).
Microphone Input ø3.5 mm monaural mini jack
Input impedance : Approx. 2 kΩ (unbalanced)
Recommended applicable microphone : Plug-in power type
Supply voltage : 2.5 V ±0.5 V
Recommended sensitivity of microphone : -48 dB±3 dB (0 dB=1 V/Pa, 1 kHz)
Line Input Input level : Approx. –10 dBV
Audio Output ø3.5 mm stereo mini jack (monaural output)
Output impedance : Approx. 600 Ω (unbalanced)
Output level : -20 dBV
External I/O Terminals ALARM IN 1 (DAY/NIGHT IN), ALARM IN 2 (ALARM OUT),
ALARM IN 3 (AUX OUT)

General

COMPONENT SPECIFICATION
Safety UL (UL60950-1), C-UL (CAN/CSA C22.2 No.60950-1), CE, IEC60950-1
EMS FCC (Part15 ClassA), ICES-003 ClassA, EN 55032 ClassB, EN55024
Power Source and Power Consumption DC 12 V : 350 mA / Approx. 4.2 W
PoE DC 48 V : 140 mA / Approx. 6.8 W (Class 2 device
Ambient Operating Temperature -10°C to +50°C (14 °F to 122 °F)
Ambient Operating Humidity 20 ~ 90 % (no condensation)
Dimensions 75.0 mm (W) x 57.0 mm (H) x 143.5 mm (D)
{2-15/16 inches (W) x 2-1/4 inches (H) x 5-21/32 inches (D)}
(excluding lens / power cord plug)
Mass (approx.) excluding lens Approx. 400 g {0.88 lbs}
Finish Main body : PC/ABS resin (Sail white)

Specifications

Data Sheet

A&E Spec Sheet

Manuals

Installation Guide

User Manual/Operating Instruction

Firmware/Software

Firmware

WV-SPN311, SPN310 Firmware

WV-SPN311, SPN310 Firmware

NTSC/PAL
   How to upgrade firmware in 2 steps.
   (Click here for detail)

  • In case of firmware updating from 1.xx to 2.xx, you have to upgrade version 9.99 once, then upgrade 2.xx. Also for upgarding from 2.xx to 4.10 (or earlier), you have to upgrade version 4.00 once, then upgrade 4.10 (or later).

  • Please click here to request the firmware version 9.99 as providing the firmware is on request only; complete the form with the model number of your camera and "Request firmware version 9.99", then click "Submit" button.
    Please clear the cache memory or access with another internet browser if you cannot access the form.

  • Important information about backing up/restoring the settings data of camera firmware ver 1.71 or older (Click here for detail)
WV-SPN311, SPN310 Firmware (Chinese)

WV-SPN311, SPN310 Firmware (Chinese)

Chinese
   How to upgrade firmware in 2 steps.
   (Click here for detail)

  • In case of firmware updating from 1.xx to 2.xx, you have to upgrade version 9.99 once, then upgrade 2.xx. Also for upgarding from 2.xx to 4.10 (or earlier), you have to upgrade version 4.00 once, then upgrade 4.10 (or later).

  • Please click here to request the firmware version 9.99 as providing the firmware is on request only; complete the form with the model number of your camera and "Request firmware version 9.99", then click "Submit" button.
    Please clear the cache memory or access with another internet browser if you cannot access the form.

  • Important information about backing up/restoring the settings data of camera firmware ver 1.71 or older (Click here for detail)

Release Note

Image/CAD/BIM

Image Data

CAD Data

Other

Technical Document

How to firmware two-stage version up

How to firmware two-stage version up

How to upgrade firmware version 2.00 (or newer) in 2 steps and/or version 4.10 (or newer).

WV-SW397, SFN311 etc. Addendum

WV-SW397, SFN311 etc. Addendum

Added to Compatible SDXC memory cards
WV-SW598, WV-SFN310 etc. Addendum

WV-SW598, WV-SFN310 etc. Addendum

To prevent unintended camera access by unkown party
WV-SW598, WV-SFN310 etc. Addendum (Chinese)

WV-SW598, WV-SFN310 etc. Addendum (Chinese)

To prevent unintended camera access by unkown party

Close