1. Home
  2. AI On-site Learning

Analytique

AI On-site Learning i-PRO

AI applications

  • Adding detection target
  • Reducing false alarms based on learning from past footage
  • Reducing missed alarms based on learning from past footage
  • Available with X-series AI camera

This software allows to enhance AI analysis by adding target object and improving accuracy.
You can add customized objects to detect using on-site camera footage through simple learning process.
In addition, it contributes to reduce missed/false alarms by training based on the past footage.

1. Customization - Adding detection target

  • Enables up to 5 specific detection targets based on customer needs with simple learning process completed in minimum 5 minutes.

2. Tuning - Reducing false alarm based on learning from past footage

  • Enables tuning the false alarms which were wrongly detected as Human, Vehicle or Bicycle.

3. Tuning - Reducing missed alarm based on learning from past footage

  • Enables tuning the missed alarms which were not properly detected.

Specification

COMPONENT SPECIFICATION
Supported camera WV-X15xxx, WV-X22xxx, WV-X25xxx (New X series Camera)
Note: To be used with AI-VMD
SD card Not required
No. of learning images required 10 - 200 images
No. of target to be added Up to 5 targets
Note: Additional targets can be detected simultaneously

*For learning process, collecting images and manual operations to teach the correct target are required.
 Also, detection performance depends on the learning results and the environments you use. Be sure to check the operation at the installation site.
*For configuration (detection area etc.), please use the latest version of i-PRO configuration tool (iCT).

Specifications

Data Sheet

A&E Spec Sheet

Manuals

Web Guide

Firmware/Software

Software

AI On-site Learning Software

AI On-site Learning Software

Version 2.10
[Important notice]
  - the ROM size and RAM size this extension software uses 
  - The memory capacity each camera holds for extension software
2.Upgrade camera firmware to the latest version for use with this extension software.
3.For configuration (detection area etc.), use the latest version of i-PRO configuration tool (iCT).

Release Note

Close