Schedule Maintenance : Monday July 15, from 2:00am(UTC) to 11:00am(UTC)
During this period, the service will not be available due to maintenance work.

 Camera registration

Last update: June, 2023

Camera registration to Genetec Security Center

1. Start [Config Tool].



2. Enter your username and password, then click the [Log on] button.


3. Select to [Config Tool] - [Tools] - [Unit enrollment]. 
Alternatively, open the [Video] tab and click the [Video Unit] at the bottom left corner of the screen.

4. There are two methods for camera registration.
A. Manual.
B. Discovery.

A. Manual
A-1. On the [Unit enrollment] display, click [Manual add...] in the bottom right corner of the screen.
A-2. Select [Video].


A-3. On the [Manual add] display, enter the information for the target camera.

  • Input the IP address, Username and Password.
  • Select the [Manufacturer] and [Product type].

    Finally, click [Add] or [Add and close] button.


A-4. The registration is complete when "Added" is displayed.


    B. Discovery.
    B-1. Automatically detect and register a camera.
    B-2. On the "Device Registration" screen, click the [Settings and Manufacturers] at the top right corner of the screen.


    B-3. If "i-PRO/Panasonic" is not displayed, click the [+Add manufacturer] and select [i-PRO/Panasonic]. 


    B-4. Click [Configure manufacturer].
    Move the cursor to [i-PRO/Panasonic], and the [Configure manufacturer] icon will appear on the right side.


    B-5. If necessary, enter the [From] IP address and [Username / Password] for the search range and click the [Save] button.


    B-6. Click [Unit enrollment] - [Start discovery].
     A list of detected cameras will be displayed.


    B-7. When the registration is completed, the status of the camera in the list will be shown as "Added".


    5. The registration is complete when the Unit is displayed under [ConfigTool] - [Video] - [Archiver].

    Genetec Security Center 5.11 / Driver Pack 11.3